On Thu, 11 Mar 2021 at 03:10, Bjorn Andersson
<bjorn.andersson@xxxxxxxxxx> wrote:
>
> On Tue 16 Feb 15:14 CST 2021, Dmitry Baryshkov wrote:
>
> > Except for the compatible value changes:
> >
> > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> >
> > May I suggest to split the compatibility name changes into a separate
> > series from this patch (without it the patch stands a chance of being
> > accepted into the stable tree, if I'm not mistaken).
> >
>
> Please let me know what I should do with this patch.
I suggested splitting the compatibility settings, so that the fixes
can go into the stable branch. I can carve that out, if Jonathan does
not object.
>
> Regards,
> Bjorn
>
> > On Mon, 15 Feb 2021 at 19:27, Jonathan Marek <jonathan@xxxxxxxx> wrote:
> > >
> > > Apply these fixes to the newly added sm8250 display ndoes
> > > - Use sm8250 compatibles instead of sdm845 compatibles
> > > - Remove "notused" interconnect (which apparently was blindly copied from
> > > my old patches)
> > > - Use dispcc node example from dt-bindings, removing clocks which aren't
> > > documented or used by the driver and fixing the region size.
> > >
> > > Fixes: 7c1dffd471b1 ("arm64: dts: qcom: sm8250.dtsi: add display system nodes")
> > > Signed-off-by: Jonathan Marek <jonathan@xxxxxxxx>
> > > ---
> > > arch/arm64/boot/dts/qcom/sm8250.dtsi | 31 +++++++---------------------
> > > 1 file changed, 8 insertions(+), 23 deletions(-)
> > >
> > > diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > > index 947e1accae3a..693ac533f9b6 100644
> > > --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > > +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > > @@ -2323,14 +2323,13 @@ usb_2_dwc3: dwc3@a800000 {
> > > };
> > >
> > > mdss: mdss@ae00000 {
> > > - compatible = "qcom,sdm845-mdss";
> > > + compatible = "qcom,sm8250-mdss";
> > > reg = <0 0x0ae00000 0 0x1000>;
> > > reg-names = "mdss";
> > >
> > > - interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_DISPLAY_CFG>,
> > > - <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
> > > + interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
> > > <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>;
> > > - interconnect-names = "notused", "mdp0-mem", "mdp1-mem";
> > > + interconnect-names = "mdp0-mem", "mdp1-mem";
> > >
> > > power-domains = <&dispcc MDSS_GDSC>;
> > >
> > > @@ -2356,7 +2355,7 @@ mdss: mdss@ae00000 {
> > > ranges;
> > >
> > > mdss_mdp: mdp@ae01000 {
> > > - compatible = "qcom,sdm845-dpu";
> > > + compatible = "qcom,sm8250-dpu";
> > > reg = <0 0x0ae01000 0 0x8f000>,
> > > <0 0x0aeb0000 0 0x2008>;
> > > reg-names = "mdp", "vbif";
> > > @@ -2580,7 +2579,7 @@ opp-358000000 {
> > >
> > > dispcc: clock-controller@af00000 {
> > > compatible = "qcom,sm8250-dispcc";
> > > - reg = <0 0x0af00000 0 0x20000>;
> > > + reg = <0 0x0af00000 0 0x10000>;
> > > mmcx-supply = <&mmcx_reg>;
> > > clocks = <&rpmhcc RPMH_CXO_CLK>,
> > > <&dsi0_phy 0>,
> > > @@ -2588,28 +2587,14 @@ dispcc: clock-controller@af00000 {
> > > <&dsi1_phy 0>,
> > > <&dsi1_phy 1>,
> > > <0>,
> > > - <0>,
> > > - <0>,
> > > - <0>,
> > > - <0>,
> > > - <0>,
> > > - <0>,
> > > - <0>,
> > > - <&sleep_clk>;
> > > + <0>;
> > > clock-names = "bi_tcxo",
> > > "dsi0_phy_pll_out_byteclk",
> > > "dsi0_phy_pll_out_dsiclk",
> > > "dsi1_phy_pll_out_byteclk",
> > > "dsi1_phy_pll_out_dsiclk",
> > > - "dp_link_clk_divsel_ten",
> > > - "dp_vco_divided_clk_src_mux",
> > > - "dptx1_phy_pll_link_clk",
> > > - "dptx1_phy_pll_vco_div_clk",
> > > - "dptx2_phy_pll_link_clk",
> > > - "dptx2_phy_pll_vco_div_clk",
> > > - "edp_phy_pll_link_clk",
> > > - "edp_phy_pll_vco_div_clk",
> > > - "sleep_clk";
> > > + "dp_phy_pll_link_clk",
> > > + "dp_phy_pll_vco_div_clk";
> > > #clock-cells = <1>;
> > > #reset-cells = <1>;
> > > #power-domain-cells = <1>;
> > > --
> > > 2.26.1
> > >
> >
> >
> > --
> > With best wishes
> > Dmitry
--
With best wishes
Dmitry
