Hi Sakari,
On Fri, Mar 12, 2021 at 09:29:04AM +0200, Sakari Ailus wrote:
> On Fri, Mar 12, 2021 at 03:25:11AM +0200, Laurent Pinchart wrote:
> > On Thu, Mar 11, 2021 at 04:40:42PM -0700, Rob Herring wrote:
> > > Now that we have the graph schema, convert the video-mux binding to DT
> > > schema.
> > >
> > > Cc: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
> > > Cc: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> > > Cc: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
> > > Cc: linux-media@xxxxxxxxxxxxxxx
> > > Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
> > > ---
> > > .../devicetree/bindings/media/video-mux.txt | 60 ------------
> > > .../devicetree/bindings/media/video-mux.yaml | 93 +++++++++++++++++++
> > > 2 files changed, 93 insertions(+), 60 deletions(-)
> > > delete mode 100644 Documentation/devicetree/bindings/media/video-mux.txt
> > > create mode 100644 Documentation/devicetree/bindings/media/video-mux.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/media/video-mux.txt b/Documentation/devicetree/bindings/media/video-mux.txt
> > > deleted file mode 100644
> > > index 63b9dc913e45..000000000000
> > > --- a/Documentation/devicetree/bindings/media/video-mux.txt
> > > +++ /dev/null
> > > @@ -1,60 +0,0 @@
> > > -Video Multiplexer
> > > -=================
> > > -
> > > -Video multiplexers allow to select between multiple input ports. Video received
> > > -on the active input port is passed through to the output port. Muxes described
> > > -by this binding are controlled by a multiplexer controller that is described by
> > > -the bindings in Documentation/devicetree/bindings/mux/mux-controller.txt
> > > -
> > > -Required properties:
> > > -- compatible : should be "video-mux"
> > > -- mux-controls : mux controller node to use for operating the mux
> > > -- #address-cells: should be <1>
> > > -- #size-cells: should be <0>
> > > -- port@*: at least three port nodes containing endpoints connecting to the
> > > - source and sink devices according to of_graph bindings. The last port is
> > > - the output port, all others are inputs.
> > > -
> > > -Optionally, #address-cells, #size-cells, and port nodes can be grouped under a
> > > -ports node as described in Documentation/devicetree/bindings/graph.txt.
> > > -
> > > -Example:
> > > -
> > > - mux: mux-controller {
> > > - compatible = "gpio-mux";
> > > - #mux-control-cells = <0>;
> > > -
> > > - mux-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
> > > - };
> > > -
> > > - video-mux {
> > > - compatible = "video-mux";
> > > - mux-controls = <&mux>;
> > > - #address-cells = <1>;
> > > - #size-cells = <0>;
> > > -
> > > - port@0 {
> > > - reg = <0>;
> > > -
> > > - mux_in0: endpoint {
> > > - remote-endpoint = <&video_source0_out>;
> > > - };
> > > - };
> > > -
> > > - port@1 {
> > > - reg = <1>;
> > > -
> > > - mux_in1: endpoint {
> > > - remote-endpoint = <&video_source1_out>;
> > > - };
> > > - };
> > > -
> > > - port@2 {
> > > - reg = <2>;
> > > -
> > > - mux_out: endpoint {
> > > - remote-endpoint = <&capture_interface_in>;
> > > - };
> > > - };
> > > - };
> > > -};
> > > diff --git a/Documentation/devicetree/bindings/media/video-mux.yaml b/Documentation/devicetree/bindings/media/video-mux.yaml
> > > new file mode 100644
> > > index 000000000000..780fbbd46a38
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/media/video-mux.yaml
> > > @@ -0,0 +1,93 @@
> > > +# SPDX-License-Identifier: GPL-2.0
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/media/video-mux.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Video Multiplexer
> > > +
> > > +maintainers:
> > > + - Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
> > > + - Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> > > +
> > > +description:
> > > + Video multiplexers allow to select between multiple input ports. Video
> > > + received on the active input port is passed through to the output port. Muxes
> > > + described by this binding are controlled by a multiplexer controller.
> > > +
> > > +properties:
> > > + compatible:
> > > + const: video-mux
> > > +
> > > + mux-controls:
> > > + maxItems: 1
> > > +
> > > + '#address-cells':
> > > + const: 1
> > > +
> > > + '#size-cells':
> > > + const: 0
> > > +
> > > + ports:
> > > + $ref: /schemas/graph.yaml#/properties/ports
> > > +
> > > + patternProperties:
> > > + '^port@':
> > > + $ref: /schemas/graph.yaml#/properties/port
> >
> > Should we require at least port@0, port@1 and port@2 ?
> >
> > > +
> > > +patternProperties:
> > > + '^port@':
> > > + $ref: /schemas/graph.yaml#/properties/port
> > > + description:
> > > + At least three port nodes containing endpoints connecting to the source
> > > + and sink devices according to of_graph bindings. The last port is the
> > > + output port, all others are inputs.
> > > +
> > > +required:
> > > + - compatible
> > > + - mux-controls
> >
> > Should a constraint be added to ensure that either a ports node or
> > port@0, port@1 and port@2 nodes exists ?
>
> It's not meaningful to have this device without such nodes. But a mux with
> more ports could be connected in a way that leaves one or both of ports 1
> and 2 unconnected. It's still not a likely configuration but a possible
> one.
Those ports wouldn't be connected, but they could still exist in DT.
> Either way,
>
> Reviewed-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
>
> > Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> >
> > > +
> > > +additionalProperties: false
> > > +
> > > +examples:
> > > + - |
> > > + #include <dt-bindings/gpio/gpio.h>
> > > +
> > > + mux: mux-controller {
> > > + compatible = "gpio-mux";
> > > + #mux-control-cells = <0>;
> > > +
> > > + mux-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
> > > + };
> > > +
> > > + video-mux {
> > > + compatible = "video-mux";
> > > + mux-controls = <&mux>;
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > +
> > > + port@0 {
> > > + reg = <0>;
> > > +
> > > + mux_in0: endpoint {
> > > + remote-endpoint = <&video_source0_out>;
> > > + };
> > > + };
> > > +
> > > + port@1 {
> > > + reg = <1>;
> > > +
> > > + mux_in1: endpoint {
> > > + remote-endpoint = <&video_source1_out>;
> > > + };
> > > + };
> > > +
> > > + port@2 {
> > > + reg = <2>;
> > > +
> > > + mux_out: endpoint {
> > > + remote-endpoint = <&capture_interface_in>;
> > > + };
> > > + };
> > > + };
> > > +...
--
Regards,
Laurent Pinchart
