Add a property to allow specifying that the device XA/XB pins are used for an external clock input rather than for a clock crystal. Signed-off-by: Robert Hancock <robert.hancock@xxxxxxxxxx> --- drivers/clk/clk-si5341.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/clk/clk-si5341.c b/drivers/clk/clk-si5341.c index f01a20fdf005..11740855bcde 100644 --- a/drivers/clk/clk-si5341.c +++ b/drivers/clk/clk-si5341.c @@ -80,6 +80,7 @@ struct clk_si5341 { u8 num_outputs; u8 num_synth; u16 chip_id; + bool xaxb_ext_clk; }; #define to_clk_si5341(_hw) container_of(_hw, struct clk_si5341, hw) @@ -529,9 +530,11 @@ static int si5341_clk_reparent(struct clk_si5341 *data, u8 index) if (err < 0) return err; - /* Power up XTAL oscillator and buffer */ + /* Power up XTAL oscillator and buffer, select clock mode */ err = regmap_update_bits(data->regmap, SI5341_XAXB_CFG, - SI5341_XAXB_CFG_PDNB, SI5341_XAXB_CFG_PDNB); + SI5341_XAXB_CFG_PDNB | SI5341_XAXB_CFG_EXTCLK_EN, + SI5341_XAXB_CFG_PDNB | (data->xaxb_ext_clk ? + SI5341_XAXB_CFG_EXTCLK_EN : 0)); if (err < 0) return err; } @@ -1560,6 +1563,8 @@ static int si5341_probe(struct i2c_client *client, initialization_required = !err; } + data->xaxb_ext_clk = of_property_read_bool(client->dev.of_node, + "silabs,xaxb-ext-clk"); if (initialization_required) { /* Populate the regmap cache in preparation for "cache only" */ -- 2.27.0