To support MIPI command mode based I80 interface panel, FIMD should do followings: - Sets LCD I80 interface timings configuration. - Uses "lcd_sys" as an IRQ resource and sets relevant IRQ configuration. - Sets LCD block configuration for I80 interface. - Sets ideal(pixel) clock is 2 times faster than the original one to generate frame done IRQ prior to the next TE signal. - Implements trigger feature that transfers image data if there is page flip request, and implements TE handler to call trigger function. Signed-off-by: YoungJun Cho <yj44.cho@xxxxxxxxxxx> Acked-by: Inki Dae <inki.dae@xxxxxxxxxxx> Acked-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx> --- drivers/gpu/drm/exynos/Kconfig | 1 + drivers/gpu/drm/exynos/exynos_drm_fimd.c | 276 ++++++++++++++++++++++++++----- include/video/samsung_fimd.h | 3 +- 3 files changed, 235 insertions(+), 45 deletions(-) diff --git a/drivers/gpu/drm/exynos/Kconfig b/drivers/gpu/drm/exynos/Kconfig index 178d2a9..9ba1aae 100644 --- a/drivers/gpu/drm/exynos/Kconfig +++ b/drivers/gpu/drm/exynos/Kconfig @@ -28,6 +28,7 @@ config DRM_EXYNOS_FIMD bool "Exynos DRM FIMD" depends on DRM_EXYNOS && !FB_S3C select FB_MODE_HELPERS + select MFD_SYSCON help Choose this option if you want to use Exynos FIMD for DRM. diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index 33161ad..28a3168 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -20,6 +20,8 @@ #include <linux/of_device.h> #include <linux/pm_runtime.h> #include <linux/component.h> +#include <linux/mfd/syscon.h> +#include <linux/regmap.h> #include <video/of_display_timing.h> #include <video/of_videomode.h> @@ -61,6 +63,24 @@ /* color key value register for hardware window 1 ~ 4. */ #define WKEYCON1_BASE(x) ((WKEYCON1 + 0x140) + ((x - 1) * 8)) +/* I80 / RGB trigger control register */ +#define TRIGCON 0x1A4 +#define TRGMODE_I80_RGB_ENABLE_I80 (1 << 0) +#define SWTRGCMD_I80_RGB_ENABLE (1 << 1) + +/* display mode change control register except exynos4 */ +#define VIDOUT_CON 0x000 +#define VIDOUT_CON_F_I80_LDI0 (0x2 << 8) + +/* I80 interface control for main LDI register */ +#define I80IFCONFAx(x) (0x1B0 + (x) * 4) +#define I80IFCONFBx(x) (0x1B8 + (x) * 4) +#define LCD_CS_SETUP(x) ((x) << 16) +#define LCD_WR_SETUP(x) ((x) << 12) +#define LCD_WR_ACTIVE(x) ((x) << 8) +#define LCD_WR_HOLD(x) ((x) << 4) +#define I80IFEN_ENABLE (1 << 0) + /* FIMD has totally five hardware windows. */ #define WINDOWS_NR 5 @@ -68,10 +88,14 @@ struct fimd_driver_data { unsigned int timing_base; + unsigned int lcdblk_offset; + unsigned int lcdblk_vt_shift; + unsigned int lcdblk_bypass_shift; unsigned int has_shadowcon:1; unsigned int has_clksel:1; unsigned int has_limited_fmt:1; + unsigned int has_vidoutcon:1; }; static struct fimd_driver_data s3c64xx_fimd_driver_data = { @@ -82,12 +106,19 @@ static struct fimd_driver_data s3c64xx_fimd_driver_data = { static struct fimd_driver_data exynos4_fimd_driver_data = { .timing_base = 0x0, + .lcdblk_offset = 0x210, + .lcdblk_vt_shift = 10, + .lcdblk_bypass_shift = 1, .has_shadowcon = 1, }; static struct fimd_driver_data exynos5_fimd_driver_data = { .timing_base = 0x20000, + .lcdblk_offset = 0x214, + .lcdblk_vt_shift = 24, + .lcdblk_bypass_shift = 15, .has_shadowcon = 1, + .has_vidoutcon = 1, }; struct fimd_win_data { @@ -112,15 +143,22 @@ struct fimd_context { struct clk *bus_clk; struct clk *lcd_clk; void __iomem *regs; + struct regmap *sysreg; struct drm_display_mode mode; struct fimd_win_data win_data[WINDOWS_NR]; unsigned int default_win; unsigned long irq_flags; + u32 vidcon0; u32 vidcon1; + u32 vidout_con; + u32 i80ifcon; + bool i80_if; bool suspended; int pipe; wait_queue_head_t wait_vsync_queue; atomic_t wait_vsync_event; + atomic_t win_updated; + atomic_t triggering; struct exynos_drm_panel_info panel; struct fimd_driver_data *driver_data; @@ -243,6 +281,14 @@ static u32 fimd_calc_clkdiv(struct fimd_context *ctx, unsigned long ideal_clk = mode->htotal * mode->vtotal * mode->vrefresh; u32 clkdiv; + if (ctx->i80_if) { + /* + * The frame done interrupt should be occurred prior to the + * next TE signal. + */ + ideal_clk *= 2; + } + /* Find the clock divider value that gets us closest to ideal_clk */ clkdiv = DIV_ROUND_UP(clk_get_rate(ctx->lcd_clk), ideal_clk); @@ -271,11 +317,10 @@ static void fimd_commit(struct exynos_drm_manager *mgr) { struct fimd_context *ctx = mgr->ctx; struct drm_display_mode *mode = &ctx->mode; - struct fimd_driver_data *driver_data; - u32 val, clkdiv, vidcon1; - int vsync_len, vbpd, vfpd, hsync_len, hbpd, hfpd; + struct fimd_driver_data *driver_data = ctx->driver_data; + void *timing_base = ctx->regs + driver_data->timing_base; + u32 val, clkdiv; - driver_data = ctx->driver_data; if (ctx->suspended) return; @@ -283,33 +328,65 @@ static void fimd_commit(struct exynos_drm_manager *mgr) if (mode->htotal == 0 || mode->vtotal == 0) return; - /* setup polarity values */ - vidcon1 = ctx->vidcon1; - if (mode->flags & DRM_MODE_FLAG_NVSYNC) - vidcon1 |= VIDCON1_INV_VSYNC; - if (mode->flags & DRM_MODE_FLAG_NHSYNC) - vidcon1 |= VIDCON1_INV_HSYNC; - writel(vidcon1, ctx->regs + driver_data->timing_base + VIDCON1); - - /* setup vertical timing values. */ - vsync_len = mode->crtc_vsync_end - mode->crtc_vsync_start; - vbpd = mode->crtc_vtotal - mode->crtc_vsync_end; - vfpd = mode->crtc_vsync_start - mode->crtc_vdisplay; - - val = VIDTCON0_VBPD(vbpd - 1) | - VIDTCON0_VFPD(vfpd - 1) | - VIDTCON0_VSPW(vsync_len - 1); - writel(val, ctx->regs + driver_data->timing_base + VIDTCON0); - - /* setup horizontal timing values. */ - hsync_len = mode->crtc_hsync_end - mode->crtc_hsync_start; - hbpd = mode->crtc_htotal - mode->crtc_hsync_end; - hfpd = mode->crtc_hsync_start - mode->crtc_hdisplay; - - val = VIDTCON1_HBPD(hbpd - 1) | - VIDTCON1_HFPD(hfpd - 1) | - VIDTCON1_HSPW(hsync_len - 1); - writel(val, ctx->regs + driver_data->timing_base + VIDTCON1); + if (ctx->i80_if) { + val = ctx->i80ifcon | I80IFEN_ENABLE; + writel(val, timing_base + I80IFCONFAx(0)); + + /* disable auto frame rate */ + writel(0, timing_base + I80IFCONFBx(0)); + + /* set video type selection to I80 interface */ + if (ctx->sysreg && regmap_update_bits(ctx->sysreg, + driver_data->lcdblk_offset, + 0x3 << driver_data->lcdblk_vt_shift, + 0x1 << driver_data->lcdblk_vt_shift)) { + DRM_ERROR("Failed to update sysreg for I80 i/f.\n"); + return; + } + } else { + int vsync_len, vbpd, vfpd, hsync_len, hbpd, hfpd; + u32 vidcon1; + + /* setup polarity values */ + vidcon1 = ctx->vidcon1; + if (mode->flags & DRM_MODE_FLAG_NVSYNC) + vidcon1 |= VIDCON1_INV_VSYNC; + if (mode->flags & DRM_MODE_FLAG_NHSYNC) + vidcon1 |= VIDCON1_INV_HSYNC; + writel(vidcon1, ctx->regs + driver_data->timing_base + VIDCON1); + + /* setup vertical timing values. */ + vsync_len = mode->crtc_vsync_end - mode->crtc_vsync_start; + vbpd = mode->crtc_vtotal - mode->crtc_vsync_end; + vfpd = mode->crtc_vsync_start - mode->crtc_vdisplay; + + val = VIDTCON0_VBPD(vbpd - 1) | + VIDTCON0_VFPD(vfpd - 1) | + VIDTCON0_VSPW(vsync_len - 1); + writel(val, ctx->regs + driver_data->timing_base + VIDTCON0); + + /* setup horizontal timing values. */ + hsync_len = mode->crtc_hsync_end - mode->crtc_hsync_start; + hbpd = mode->crtc_htotal - mode->crtc_hsync_end; + hfpd = mode->crtc_hsync_start - mode->crtc_hdisplay; + + val = VIDTCON1_HBPD(hbpd - 1) | + VIDTCON1_HFPD(hfpd - 1) | + VIDTCON1_HSPW(hsync_len - 1); + writel(val, ctx->regs + driver_data->timing_base + VIDTCON1); + } + + if (driver_data->has_vidoutcon) + writel(ctx->vidout_con, timing_base + VIDOUT_CON); + + /* set bypass selection */ + if (ctx->sysreg && regmap_update_bits(ctx->sysreg, + driver_data->lcdblk_offset, + 0x1 << driver_data->lcdblk_bypass_shift, + 0x1 << driver_data->lcdblk_bypass_shift)) { + DRM_ERROR("Failed to update sysreg for bypass setting.\n"); + return; + } /* setup horizontal and vertical display size. */ val = VIDTCON2_LINEVAL(mode->vdisplay - 1) | @@ -322,7 +399,8 @@ static void fimd_commit(struct exynos_drm_manager *mgr) * fields of register with prefix '_F' would be updated * at vsync(same as dma start) */ - val = VIDCON0_ENVID | VIDCON0_ENVID_F; + val = ctx->vidcon0; + val |= VIDCON0_ENVID | VIDCON0_ENVID_F; if (ctx->driver_data->has_clksel) val |= VIDCON0_CLKSEL_LCD; @@ -660,6 +738,9 @@ static void fimd_win_commit(struct exynos_drm_manager *mgr, int zpos) } win_data->enabled = true; + + if (ctx->i80_if) + atomic_set(&ctx->win_updated, 1); } static void fimd_win_disable(struct exynos_drm_manager *mgr, int zpos) @@ -838,6 +919,58 @@ static void fimd_dpms(struct exynos_drm_manager *mgr, int mode) } } +static void fimd_trigger(struct device *dev) +{ + struct exynos_drm_manager *mgr = get_fimd_manager(dev); + struct fimd_context *ctx = mgr->ctx; + struct fimd_driver_data *driver_data = ctx->driver_data; + void *timing_base = ctx->regs + driver_data->timing_base; + u32 reg; + + atomic_set(&ctx->triggering, 1); + + reg = readl(ctx->regs + VIDINTCON0); + reg |= (VIDINTCON0_INT_ENABLE | VIDINTCON0_INT_I80IFDONE | + VIDINTCON0_INT_SYSMAINCON); + writel(reg, ctx->regs + VIDINTCON0); + + reg = readl(timing_base + TRIGCON); + reg |= (TRGMODE_I80_RGB_ENABLE_I80 | SWTRGCMD_I80_RGB_ENABLE); + writel(reg, timing_base + TRIGCON); +} + +static void fimd_te_handler(struct exynos_drm_manager *mgr) +{ + struct fimd_context *ctx = mgr->ctx; + + /* Checks the crtc is detached already from encoder */ + if (ctx->pipe < 0 || !ctx->drm_dev) + return; + + /* + * Skips to trigger if in triggering state, because multiple triggering + * requests can cause panel reset. + */ + if (atomic_read(&ctx->triggering)) + return; + + /* + * If there is a page flip request, triggers and handles the page flip + * event so that current fb can be updated into panel GRAM. + */ + if (atomic_add_unless(&ctx->win_updated, -1, 0)) + fimd_trigger(ctx->dev); + + /* Wakes up vsync event queue */ + if (atomic_read(&ctx->wait_vsync_event)) { + atomic_set(&ctx->wait_vsync_event, 0); + wake_up(&ctx->wait_vsync_queue); + + if (!atomic_read(&ctx->triggering)) + drm_handle_vblank(ctx->drm_dev, ctx->pipe); + } +} + static struct exynos_drm_manager_ops fimd_manager_ops = { .dpms = fimd_dpms, .mode_fixup = fimd_mode_fixup, @@ -849,6 +982,7 @@ static struct exynos_drm_manager_ops fimd_manager_ops = { .win_mode_set = fimd_win_mode_set, .win_commit = fimd_win_commit, .win_disable = fimd_win_disable, + .te_handler = fimd_te_handler, }; static struct exynos_drm_manager fimd_manager = { @@ -859,26 +993,40 @@ static struct exynos_drm_manager fimd_manager = { static irqreturn_t fimd_irq_handler(int irq, void *dev_id) { struct fimd_context *ctx = (struct fimd_context *)dev_id; - u32 val; + u32 val, clear_bit; val = readl(ctx->regs + VIDINTCON1); - if (val & VIDINTCON1_INT_FRAME) - /* VSYNC interrupt */ - writel(VIDINTCON1_INT_FRAME, ctx->regs + VIDINTCON1); + clear_bit = ctx->i80_if ? VIDINTCON1_INT_I80 : VIDINTCON1_INT_FRAME; + if (val & clear_bit) + writel(clear_bit, ctx->regs + VIDINTCON1); /* check the crtc is detached already from encoder */ if (ctx->pipe < 0 || !ctx->drm_dev) goto out; - drm_handle_vblank(ctx->drm_dev, ctx->pipe); - exynos_drm_crtc_finish_pageflip(ctx->drm_dev, ctx->pipe); + if (ctx->i80_if) { + /* unset I80 frame done interrupt */ + val = readl(ctx->regs + VIDINTCON0); + val &= ~(VIDINTCON0_INT_I80IFDONE | VIDINTCON0_INT_SYSMAINCON); + writel(val, ctx->regs + VIDINTCON0); - /* set wait vsync event to zero and wake up queue. */ - if (atomic_read(&ctx->wait_vsync_event)) { - atomic_set(&ctx->wait_vsync_event, 0); - wake_up(&ctx->wait_vsync_queue); + /* exit triggering mode */ + atomic_set(&ctx->triggering, 0); + + drm_handle_vblank(ctx->drm_dev, ctx->pipe); + exynos_drm_crtc_finish_pageflip(ctx->drm_dev, ctx->pipe); + } else { + drm_handle_vblank(ctx->drm_dev, ctx->pipe); + exynos_drm_crtc_finish_pageflip(ctx->drm_dev, ctx->pipe); + + /* set wait vsync event to zero and wake up queue. */ + if (atomic_read(&ctx->wait_vsync_event)) { + atomic_set(&ctx->wait_vsync_event, 0); + wake_up(&ctx->wait_vsync_queue); + } } + out: return IRQ_HANDLED; } @@ -923,6 +1071,7 @@ static int fimd_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct fimd_context *ctx; + struct device_node *i80_if_timings; struct resource *res; int ret = -EINVAL; @@ -944,12 +1093,51 @@ static int fimd_probe(struct platform_device *pdev) ctx->dev = dev; ctx->suspended = true; + ctx->driver_data = drm_fimd_get_driver_data(pdev); if (of_property_read_bool(dev->of_node, "samsung,invert-vden")) ctx->vidcon1 |= VIDCON1_INV_VDEN; if (of_property_read_bool(dev->of_node, "samsung,invert-vclk")) ctx->vidcon1 |= VIDCON1_INV_VCLK; + i80_if_timings = of_get_child_by_name(dev->of_node, "i80-if-timings"); + if (i80_if_timings) { + u32 val; + + ctx->i80_if = true; + + if (ctx->driver_data->has_vidoutcon) + ctx->vidout_con |= VIDOUT_CON_F_I80_LDI0; + else + ctx->vidcon0 |= VIDCON0_VIDOUT_I80_LDI0; + /* + * The user manual describes that this "DSI_EN" bit is required + * to enable I80 24-bit data interface. + */ + ctx->vidcon0 |= VIDCON0_DSI_EN; + + if (of_property_read_u32(i80_if_timings, "cs-setup", &val)) + val = 0; + ctx->i80ifcon = LCD_CS_SETUP(val); + if (of_property_read_u32(i80_if_timings, "wr-setup", &val)) + val = 0; + ctx->i80ifcon |= LCD_WR_SETUP(val); + if (of_property_read_u32(i80_if_timings, "wr-active", &val)) + val = 1; + ctx->i80ifcon |= LCD_WR_ACTIVE(val); + if (of_property_read_u32(i80_if_timings, "wr-hold", &val)) + val = 0; + ctx->i80ifcon |= LCD_WR_HOLD(val); + } + of_node_put(i80_if_timings); + + ctx->sysreg = syscon_regmap_lookup_by_phandle(dev->of_node, + "samsung,sysreg"); + if (IS_ERR(ctx->sysreg)) { + dev_warn(dev, "failed to get system register.\n"); + ctx->sysreg = NULL; + } + ctx->bus_clk = devm_clk_get(dev, "fimd"); if (IS_ERR(ctx->bus_clk)) { dev_err(dev, "failed to get bus clock\n"); @@ -972,7 +1160,8 @@ static int fimd_probe(struct platform_device *pdev) goto err_del_component; } - res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "vsync"); + res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, + ctx->i80_if ? "lcd_sys" : "vsync"); if (!res) { dev_err(dev, "irq request failed.\n"); ret = -ENXIO; @@ -986,7 +1175,6 @@ static int fimd_probe(struct platform_device *pdev) goto err_del_component; } - ctx->driver_data = drm_fimd_get_driver_data(pdev); init_waitqueue_head(&ctx->wait_vsync_queue); atomic_set(&ctx->wait_vsync_event, 0); diff --git a/include/video/samsung_fimd.h b/include/video/samsung_fimd.h index b039320..eaad58b 100644 --- a/include/video/samsung_fimd.h +++ b/include/video/samsung_fimd.h @@ -19,6 +19,7 @@ /* VIDCON0 */ #define VIDCON0 0x00 +#define VIDCON0_DSI_EN (1 << 30) #define VIDCON0_INTERLACE (1 << 29) #define VIDCON0_VIDOUT_MASK (0x7 << 26) #define VIDCON0_VIDOUT_SHIFT 26 @@ -355,7 +356,7 @@ #define VIDINTCON0_INT_ENABLE (1 << 0) #define VIDINTCON1 0x134 -#define VIDINTCON1_INT_I180 (1 << 2) +#define VIDINTCON1_INT_I80 (1 << 2) #define VIDINTCON1_INT_FRAME (1 << 1) #define VIDINTCON1_INT_FIFO (1 << 0) -- 1.9.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html