On 10/03/2021 18:19, Aswath Govindraju wrote:
From: Faiz Abbas <faiz_abbas@xxxxxx> There are 4 instances of gpio modules in main domain: gpio0, gpio2, gpio4 and gpio6 Groups are created to provide protection between different processor virtual worlds. Each of these modules I/O pins are muxed within the group. Exactly one module can be selected to control the corresponding pin by selecting it in the pad mux configuration registers. This group in main domain pins out 69 lines (5 banks). Add DT modes for each module instance in the main domain. Similar to the gpio groups in main domain, there is one gpio group in wakeup domain with 2 module instances in it. The gpio group pins out 72 pins (6 banks) of the first 85 gpio lines. Add DT nodes for each module instance in the wakeup domain. Signed-off-by: Faiz Abbas <faiz_abbas@xxxxxx> Signed-off-by: Sekhar Nori <nsekhar@xxxxxx> Signed-off-by: Aswath Govindraju <a-govindraju@xxxxxx> --- arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 72 +++++++++++++++++++ .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 34 +++++++++ 2 files changed, 106 insertions(+)
Reviewed-by: Grygorii Strashko <grygorii.strashko@xxxxxx> -- Best regards, grygorii
