Add binding documentation for the pincontrol core found in the BCM63268 family SoCs. Signed-off-by: Jonas Gorski <jonas.gorski@xxxxxxxxx> Co-developed-by: Jonas Gorski <jonas.gorski@xxxxxxxxx> Signed-off-by: Álvaro Fernández Rojas <noltari@xxxxxxxxx> --- v6: add changes suggested by Rob Herring v5: change Documentation to dt-bindings in commit title v4: no changes v3: add new gpio node v2: remove interrupts .../pinctrl/brcm,bcm63268-pinctrl.yaml | 211 ++++++++++++++++++ 1 file changed, 211 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml new file mode 100644 index 000000000000..9ff91ea96aef --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml @@ -0,0 +1,211 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/brcm,bcm63268-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM63268 pin controller + +maintainers: + - Álvaro Fernández Rojas <noltari@xxxxxxxxx> + - Jonas Gorski <jonas.gorski@xxxxxxxxx> + +description: |+ + The pin controller node should be the child of a syscon node. + + Refer to the the bindings described in + Documentation/devicetree/bindings/mfd/syscon.yaml + +properties: + compatible: + const: brcm,bcm63268-pinctrl + + gpio: + type: object + properties: + compatible: + const: brcm,bcm63268-gpio + + data: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Offset in the register map for the data register (in bytes). + + dirout: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Offset in the register map for the dirout register (in bytes). + + gpio-controller: true + + "#gpio-cells": + const: 2 + + gpio-ranges: + maxItems: 1 + + required: + - gpio-controller + - gpio-ranges + - '#gpio-cells' + + additionalProperties: false + +patternProperties: + '^.*-pins$': + if: + type: object + then: + properties: + function: + $ref: "pinmux-node.yaml#/properties/function" + enum: [ serial_led_clk, serial_led_data, hsspi_cs4, hsspi_cs5, + hsspi_cs6, hsspi_cs7, adsl_spi_miso, adsl_spi_mosi, + vreq_clk, pcie_clkreq_b, robosw_led_clk, robosw_led_data, + nand, gpio35_alt, dectpd, vdsl_phy_override_0, + vdsl_phy_override_1, vdsl_phy_override_2, + vdsl_phy_override_3, dsl_gpio8, dsl_gpio9 ] + + pins: + $ref: "pinmux-node.yaml#/properties/pins" + enum: [ gpio0, gpio1, gpio16, gpio17, gpio8, gpio9, gpio18, gpio19, + gpio22, gpio23, gpio30, gpio31, nand_grp, gpio35 + dectpd_grp, vdsl_phy_override_0_grp, + vdsl_phy_override_1_grp, vdsl_phy_override_2_grp, + vdsl_phy_override_3_grp, dsl_gpio8, dsl_gpio9 ] + +required: + - compatible + - gpio + +additionalProperties: false + +examples: + - | + gpio_cntl@100000c0 { + compatible = "brcm,bcm63268-gpio-controller", "syscon", "simple-mfd"; + reg = <0x100000c0 0x80>; + + pinctrl: pinctrl { + compatible = "brcm,bcm63268-pinctrl"; + + gpio { + compatible = "brcm,bcm63268-gpio"; + data = <0xc>; + dirout = <0x4>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 52>; + #gpio-cells = <2>; + }; + + pinctrl_serial_led: serial_led-pins { + pinctrl_serial_led_clk: serial_led_clk-pins { + function = "serial_led_clk"; + pins = "gpio0"; + }; + + pinctrl_serial_led_data: serial_led_data-pins { + function = "serial_led_data"; + pins = "gpio1"; + }; + }; + + pinctrl_hsspi_cs4: hsspi_cs4-pins { + function = "hsspi_cs4"; + pins = "gpio16"; + }; + + pinctrl_hsspi_cs5: hsspi_cs5-pins { + function = "hsspi_cs5"; + pins = "gpio17"; + }; + + pinctrl_hsspi_cs6: hsspi_cs6-pins { + function = "hsspi_cs6"; + pins = "gpio8"; + }; + + pinctrl_hsspi_cs7: hsspi_cs7-pins { + function = "hsspi_cs7"; + pins = "gpio9"; + }; + + pinctrl_adsl_spi: adsl_spi-pins { + pinctrl_adsl_spi_miso: adsl_spi_miso-pins { + function = "adsl_spi_miso"; + pins = "gpio18"; + }; + + pinctrl_adsl_spi_mosi: adsl_spi_mosi-pins { + function = "adsl_spi_mosi"; + pins = "gpio19"; + }; + }; + + pinctrl_vreq_clk: vreq_clk-pins { + function = "vreq_clk"; + pins = "gpio22"; + }; + + pinctrl_pcie_clkreq_b: pcie_clkreq_b-pins { + function = "pcie_clkreq_b"; + pins = "gpio23"; + }; + + pinctrl_robosw_led_clk: robosw_led_clk-pins { + function = "robosw_led_clk"; + pins = "gpio30"; + }; + + pinctrl_robosw_led_data: robosw_led_data-pins { + function = "robosw_led_data"; + pins = "gpio31"; + }; + + pinctrl_nand: nand-pins { + function = "nand"; + group = "nand_grp"; + }; + + pinctrl_gpio35_alt: gpio35_alt-pins { + function = "gpio35_alt"; + pin = "gpio35"; + }; + + pinctrl_dectpd: dectpd-pins { + function = "dectpd"; + group = "dectpd_grp"; + }; + + pinctrl_vdsl_phy_override_0: vdsl_phy_override_0-pins { + function = "vdsl_phy_override_0"; + group = "vdsl_phy_override_0_grp"; + }; + + pinctrl_vdsl_phy_override_1: vdsl_phy_override_1-pins { + function = "vdsl_phy_override_1"; + group = "vdsl_phy_override_1_grp"; + }; + + pinctrl_vdsl_phy_override_2: vdsl_phy_override_2-pins { + function = "vdsl_phy_override_2"; + group = "vdsl_phy_override_2_grp"; + }; + + pinctrl_vdsl_phy_override_3: vdsl_phy_override_3-pins { + function = "vdsl_phy_override_3"; + group = "vdsl_phy_override_3_grp"; + }; + + pinctrl_dsl_gpio8: dsl_gpio8-pins { + function = "dsl_gpio8"; + group = "dsl_gpio8"; + }; + + pinctrl_dsl_gpio9: dsl_gpio9-pins { + function = "dsl_gpio9"; + group = "dsl_gpio9"; + }; + }; + }; -- 2.20.1
