Add binding documentation for the pincontrol core found in BCM6358 SoCs. Signed-off-by: Jonas Gorski <jonas.gorski@xxxxxxxxx> Co-developed-by: Jonas Gorski <jonas.gorski@xxxxxxxxx> Signed-off-by: Álvaro Fernández Rojas <noltari@xxxxxxxxx> --- v6: add changes suggested by Rob Herring v5: change Documentation to dt-bindings in commit title v4: no changes v3: add new gpio node v2: remove interrupts .../pinctrl/brcm,bcm6358-pinctrl.yaml | 140 ++++++++++++++++++ 1 file changed, 140 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml new file mode 100644 index 000000000000..a04fc445c761 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml @@ -0,0 +1,140 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6358-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6358 pin controller + +maintainers: + - Álvaro Fernández Rojas <noltari@xxxxxxxxx> + - Jonas Gorski <jonas.gorski@xxxxxxxxx> + +description: |+ + The pin controller node should be the child of a syscon node. + + Refer to the the bindings described in + Documentation/devicetree/bindings/mfd/syscon.yaml + +properties: + compatible: + const: brcm,bcm6358-pinctrl + + gpio: + type: object + properties: + compatible: + const: brcm,bcm6358-gpio + + data: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Offset in the register map for the data register (in bytes). + + dirout: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Offset in the register map for the dirout register (in bytes). + + gpio-controller: true + + "#gpio-cells": + const: 2 + + gpio-ranges: + maxItems: 1 + + required: + - gpio-controller + - gpio-ranges + - '#gpio-cells' + + additionalProperties: false + +patternProperties: + '^.*-pins$': + if: + type: object + then: + properties: + function: + $ref: "pinmux-node.yaml#/properties/function" + enum: [ ebi_cs, uart1, serial_led, legacy_led, led, spi_cs, utopia, + pwm_syn_clk, sys_irq ] + + pins: + $ref: "pinmux-node.yaml#/properties/pins" + enum: [ ebi_cs_grp, uart1_grp, serial_led_grp, legacy_led_grp, + led_grp, spi_cs_grp, utopia_grp, pwm_syn_clk, sys_irq_grp ] + +required: + - compatible + - gpio + +additionalProperties: false + +examples: + - | + gpio_cntl@fffe0080 { + compatible = "brcm,bcm6358-gpio-controller", "syscon", "simple-mfd"; + reg = <0xfffe0080 0x80>; + + pinctrl: pinctrl { + compatible = "brcm,bcm6358-pinctrl"; + + gpio { + compatible = "brcm,bcm6358-gpio"; + data = <0xc>; + dirout = <0x4>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 40>; + #gpio-cells = <2>; + }; + + pinctrl_ebi_cs: ebi_cs-pins { + function = "ebi_cs"; + groups = "ebi_cs_grp"; + }; + + pinctrl_uart1: uart1-pins { + function = "uart1"; + groups = "uart1_grp"; + }; + + pinctrl_serial_led: serial_led-pins { + function = "serial_led"; + groups = "serial_led_grp"; + }; + + pinctrl_legacy_led: legacy_led-pins { + function = "legacy_led"; + groups = "legacy_led_grp"; + }; + + pinctrl_led: led-pins { + function = "led"; + groups = "led_grp"; + }; + + pinctrl_spi_cs_23: spi_cs-pins { + function = "spi_cs"; + groups = "spi_cs_grp"; + }; + + pinctrl_utopia: utopia-pins { + function = "utopia"; + groups = "utopia_grp"; + }; + + pinctrl_pwm_syn_clk: pwm_syn_clk-pins { + function = "pwm_syn_clk"; + groups = "pwm_syn_clk_grp"; + }; + + pinctrl_sys_irq: sys_irq-pins { + function = "sys_irq"; + groups = "sys_irq_grp"; + }; + }; + }; -- 2.20.1
