Agilex, N5X and Stratix 10 share all quite similar arm64 hard cores and SoC-part. Up to a point that N5X uses the same DTSI as Agilex. From the Linux kernel point of view these are flavors of the same architecture so there is no need for three top-level arm64 architectures. Simplify this by merging all three architectures into ARCH_SOCFPGA64. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx> --- arch/arm64/Kconfig.platforms | 10 ---------- arch/arm64/boot/dts/intel/Makefile | 6 +++--- arch/arm64/configs/defconfig | 1 - drivers/clk/socfpga/Kconfig | 4 ++-- drivers/firmware/Kconfig | 2 +- drivers/reset/Kconfig | 2 +- 6 files changed, 7 insertions(+), 18 deletions(-) diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 78bba3633eab..754738029cc6 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -8,16 +8,6 @@ config ARCH_ACTIONS help This enables support for the Actions Semiconductor S900 SoC family. -config ARCH_AGILEX - bool "Intel's Agilex SoCFPGA Family" - help - This enables support for Intel's Agilex SoCFPGA Family. - -config ARCH_N5X - bool "Intel's eASIC N5X SoCFPGA Family" - help - This enables support for Intel's eASIC N5X SoCFPGA Family. - config ARCH_SUNXI bool "Allwinner sunxi 64-bit SoC Family" select ARCH_HAS_RESET_CONTROLLER diff --git a/arch/arm64/boot/dts/intel/Makefile b/arch/arm64/boot/dts/intel/Makefile index 3a052540605b..bb340584785c 100644 --- a/arch/arm64/boot/dts/intel/Makefile +++ b/arch/arm64/boot/dts/intel/Makefile @@ -1,5 +1,5 @@ # SPDX-License-Identifier: GPL-2.0-only -dtb-$(CONFIG_ARCH_AGILEX) += socfpga_agilex_socdk.dtb \ - socfpga_agilex_socdk_nand.dtb +dtb-$(CONFIG_ARCH_SOCFPGA64) += socfpga_agilex_socdk.dtb \ + socfpga_agilex_socdk_nand.dtb dtb-$(CONFIG_ARCH_KEEMBAY) += keembay-evm.dtb -dtb-$(CONFIG_ARCH_N5X) += socfpga_n5x_socdk.dtb +dtb-$(CONFIG_ARCH_SOCFPGA64) += socfpga_n5x_socdk.dtb diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index ee742900a150..4968d4b3d89d 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -28,7 +28,6 @@ CONFIG_KALLSYMS_ALL=y # CONFIG_COMPAT_BRK is not set CONFIG_PROFILING=y CONFIG_ARCH_ACTIONS=y -CONFIG_ARCH_AGILEX=y CONFIG_ARCH_SUNXI=y CONFIG_ARCH_ALPINE=y CONFIG_ARCH_BCM2835=y diff --git a/drivers/clk/socfpga/Kconfig b/drivers/clk/socfpga/Kconfig index 8cf3dfdba255..834797c68cb2 100644 --- a/drivers/clk/socfpga/Kconfig +++ b/drivers/clk/socfpga/Kconfig @@ -2,5 +2,5 @@ config COMMON_CLK_SOCFPGA64 bool # Intel Stratix / Agilex / N5X clock controller support - default y if ARCH_AGILEX || ARCH_N5X || ARCH_SOCFPGA64 - depends on ARCH_AGILEX || ARCH_N5X || ARCH_SOCFPGA64 + default y if ARCH_SOCFPGA64 + depends on ARCH_SOCFPGA64 diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig index 59660798f05f..f290fad41731 100644 --- a/drivers/firmware/Kconfig +++ b/drivers/firmware/Kconfig @@ -206,7 +206,7 @@ config FW_CFG_SYSFS_CMDLINE config INTEL_STRATIX10_SERVICE tristate "Intel Stratix10 Service Layer" - depends on (ARCH_SOCFPGA64 || ARCH_AGILEX) && HAVE_ARM_SMCCC + depends on ARCH_SOCFPGA64 && HAVE_ARM_SMCCC default n help Intel Stratix10 service layer runs at privileged exception level, diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index fa7f1394697b..796c9e3e5e81 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -183,7 +183,7 @@ config RESET_SCMI config RESET_SIMPLE bool "Simple Reset Controller Driver" if COMPILE_TEST - default ARCH_AGILEX || ARCH_ASPEED || ARCH_BCM4908 || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || ARCH_SOCFPGA64 || ARCH_SUNXI || ARC + default ARCH_ASPEED || ARCH_BCM4908 || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || ARCH_SOCFPGA64 || ARCH_SUNXI || ARC help This enables a simple reset controller driver for reset lines that that can be asserted and deasserted by toggling bits in a contiguous, -- 2.25.1
