On Tue, 09 Mar 2021 14:15:13 +0000, Srinivas Kandagatla wrote: > WSA881x SoundWire device ports are statically assigned to master ports > at design time. So add bindings required to specify these mappings! > > Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx> > --- > .../devicetree/bindings/sound/qcom,wsa881x.yaml | 9 +++++++++ > 1 file changed, 9 insertions(+) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/qcom,wsa881x.example.dt.yaml: speaker@0,1: 'qcom-port-mapping' does not match any of the regexes: 'pinctrl-[0-9]+' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/qcom,wsa881x.example.dt.yaml: speaker@0,2: 'qcom-port-mapping' does not match any of the regexes: 'pinctrl-[0-9]+' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml See https://patchwork.ozlabs.org/patch/1449860 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
