From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
Use human-readable defines for GIC interrupt type and flag, instead of
hard-coding the numbers. It makes review easier. No functional change.
Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
---
arch/arm64/boot/dts/intel/socfpga_agilex.dtsi | 137 +++++++++++-------
1 file changed, 82 insertions(+), 55 deletions(-)
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
index 103de0a91e60..3cba4c03d560 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
@@ -6,6 +6,7 @@
/dts-v1/;
#include <dt-bindings/reset/altr,rst-mgr-s10.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/agilex-clock.h>
/ {
@@ -61,10 +62,10 @@ cpu3: cpu@3 {
pmu {
compatible = "arm,armv8-pmuv3";
- interrupts = <0 170 4>,
- <0 171 4>,
- <0 172 4>,
- <0 173 4>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu0>,
<&cpu1>,
<&cpu2>,
@@ -118,10 +119,10 @@ qspi_clk: qspi-clk {
timer {
compatible = "arm,armv8-timer";
interrupt-parent = <&intc>;
- interrupts = <1 13 0xf08>,
- <1 14 0xf08>,
- <1 11 0xf08>,
- <1 10 0xf08>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
usbphy0: usbphy {
@@ -153,7 +154,7 @@ clkmgr: clock-controller@ffd10000 {
gmac0: ethernet@ff800000 {
compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac";
reg = <0xff800000 0x2000>;
- interrupts = <0 90 4>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
mac-address = [00 00 00 00 00 00];
resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>;
@@ -171,7 +172,7 @@ gmac0: ethernet@ff800000 {
gmac1: ethernet@ff802000 {
compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac";
reg = <0xff802000 0x2000>;
- interrupts = <0 91 4>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
mac-address = [00 00 00 00 00 00];
resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>;
@@ -189,7 +190,7 @@ gmac1: ethernet@ff802000 {
gmac2: ethernet@ff804000 {
compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac";
reg = <0xff804000 0x2000>;
- interrupts = <0 92 4>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
mac-address = [00 00 00 00 00 00];
resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>;
@@ -220,7 +221,7 @@ porta: gpio-controller@0 {
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
- interrupts = <0 110 4>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -240,7 +241,7 @@ portb: gpio-controller@0 {
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
- interrupts = <0 111 4>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -249,7 +250,7 @@ i2c0: i2c@ffc02800 {
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0xffc02800 0x100>;
- interrupts = <0 103 4>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
resets = <&rst I2C0_RESET>;
clocks = <&clkmgr AGILEX_L4_SP_CLK>;
status = "disabled";
@@ -260,7 +261,7 @@ i2c1: i2c@ffc02900 {
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0xffc02900 0x100>;
- interrupts = <0 104 4>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
resets = <&rst I2C1_RESET>;
clocks = <&clkmgr AGILEX_L4_SP_CLK>;
status = "disabled";
@@ -271,7 +272,7 @@ i2c2: i2c@ffc02a00 {
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0xffc02a00 0x100>;
- interrupts = <0 105 4>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
resets = <&rst I2C2_RESET>;
clocks = <&clkmgr AGILEX_L4_SP_CLK>;
status = "disabled";
@@ -282,7 +283,7 @@ i2c3: i2c@ffc02b00 {
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0xffc02b00 0x100>;
- interrupts = <0 106 4>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
resets = <&rst I2C3_RESET>;
clocks = <&clkmgr AGILEX_L4_SP_CLK>;
status = "disabled";
@@ -293,7 +294,7 @@ i2c4: i2c@ffc02c00 {
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0xffc02c00 0x100>;
- interrupts = <0 107 4>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
resets = <&rst I2C4_RESET>;
clocks = <&clkmgr AGILEX_L4_SP_CLK>;
status = "disabled";
@@ -304,7 +305,7 @@ mmc: dwmmc0@ff808000 {
#size-cells = <0>;
compatible = "altr,socfpga-dw-mshc";
reg = <0xff808000 0x1000>;
- interrupts = <0 96 4>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
fifo-depth = <0x400>;
resets = <&rst SDMMC_RESET>;
reset-names = "reset";
@@ -322,7 +323,7 @@ nand: nand@ffb90000 {
reg = <0xffb90000 0x10000>,
<0xffb80000 0x1000>;
reg-names = "nand_data", "denali_reg";
- interrupts = <0 97 4>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clkmgr AGILEX_NAND_CLK>,
<&clkmgr AGILEX_NAND_X_CLK>,
<&clkmgr AGILEX_NAND_ECC_CLK>;
@@ -339,15 +340,15 @@ ocram: sram@ffe00000 {
pdma: pdma@ffda0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0xffda0000 0x1000>;
- interrupts = <0 81 4>,
- <0 82 4>,
- <0 83 4>,
- <0 84 4>,
- <0 85 4>,
- <0 86 4>,
- <0 87 4>,
- <0 88 4>,
- <0 89 4>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
@@ -369,17 +370,43 @@ smmu: iommu@fa000000 {
#global-interrupts = <2>;
#iommu-cells = <1>;
interrupt-parent = <&intc>;
- interrupts = <0 128 4>, /* Global Secure Fault */
- <0 129 4>, /* Global Non-secure Fault */
+ /* Global Secure Fault */
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ /* Global Non-secure Fault */
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
/* Non-secure Context Interrupts (32) */
- <0 138 4>, <0 139 4>, <0 140 4>, <0 141 4>,
- <0 142 4>, <0 143 4>, <0 144 4>, <0 145 4>,
- <0 146 4>, <0 147 4>, <0 148 4>, <0 149 4>,
- <0 150 4>, <0 151 4>, <0 152 4>, <0 153 4>,
- <0 154 4>, <0 155 4>, <0 156 4>, <0 157 4>,
- <0 158 4>, <0 159 4>, <0 160 4>, <0 161 4>,
- <0 162 4>, <0 163 4>, <0 164 4>, <0 165 4>,
- <0 166 4>, <0 167 4>, <0 168 4>, <0 169 4>;
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
stream-match-mask = <0x7ff0>;
clocks = <&clkmgr AGILEX_MPU_CCU_CLK>,
<&clkmgr AGILEX_L3_MAIN_FREE_CLK>,
@@ -392,7 +419,7 @@ spi0: spi@ffda4000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0xffda4000 0x1000>;
- interrupts = <0 99 4>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
resets = <&rst SPIM0_RESET>;
reset-names = "spi";
reg-io-width = <4>;
@@ -406,7 +433,7 @@ spi1: spi@ffda5000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0xffda5000 0x1000>;
- interrupts = <0 100 4>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
resets = <&rst SPIM1_RESET>;
reset-names = "spi";
reg-io-width = <4>;
@@ -422,7 +449,7 @@ sysmgr: sysmgr@ffd12000 {
timer0: timer0@ffc03000 {
compatible = "snps,dw-apb-timer";
- interrupts = <0 113 4>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xffc03000 0x100>;
clocks = <&clkmgr AGILEX_L4_SP_CLK>;
clock-names = "timer";
@@ -430,7 +457,7 @@ timer0: timer0@ffc03000 {
timer1: timer1@ffc03100 {
compatible = "snps,dw-apb-timer";
- interrupts = <0 114 4>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xffc03100 0x100>;
clocks = <&clkmgr AGILEX_L4_SP_CLK>;
clock-names = "timer";
@@ -438,7 +465,7 @@ timer1: timer1@ffc03100 {
timer2: timer2@ffd00000 {
compatible = "snps,dw-apb-timer";
- interrupts = <0 115 4>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xffd00000 0x100>;
clocks = <&clkmgr AGILEX_L4_SP_CLK>;
clock-names = "timer";
@@ -446,7 +473,7 @@ timer2: timer2@ffd00000 {
timer3: timer3@ffd00100 {
compatible = "snps,dw-apb-timer";
- interrupts = <0 116 4>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xffd00100 0x100>;
clocks = <&clkmgr AGILEX_L4_SP_CLK>;
clock-names = "timer";
@@ -455,7 +482,7 @@ timer3: timer3@ffd00100 {
uart0: serial0@ffc02000 {
compatible = "snps,dw-apb-uart";
reg = <0xffc02000 0x100>;
- interrupts = <0 108 4>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
resets = <&rst UART0_RESET>;
@@ -466,7 +493,7 @@ uart0: serial0@ffc02000 {
uart1: serial1@ffc02100 {
compatible = "snps,dw-apb-uart";
reg = <0xffc02100 0x100>;
- interrupts = <0 109 4>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
resets = <&rst UART1_RESET>;
@@ -477,7 +504,7 @@ uart1: serial1@ffc02100 {
usb0: usb@ffb00000 {
compatible = "snps,dwc2";
reg = <0xffb00000 0x40000>;
- interrupts = <0 93 4>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usbphy0>;
phy-names = "usb2-phy";
resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>;
@@ -490,7 +517,7 @@ usb0: usb@ffb00000 {
usb1: usb@ffb40000 {
compatible = "snps,dwc2";
reg = <0xffb40000 0x40000>;
- interrupts = <0 94 4>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usbphy0>;
phy-names = "usb2-phy";
resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>;
@@ -503,7 +530,7 @@ usb1: usb@ffb40000 {
watchdog0: watchdog@ffd00200 {
compatible = "snps,dw-wdt";
reg = <0xffd00200 0x100>;
- interrupts = <0 117 4>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
resets = <&rst WATCHDOG0_RESET>;
clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>;
status = "disabled";
@@ -512,7 +539,7 @@ watchdog0: watchdog@ffd00200 {
watchdog1: watchdog@ffd00300 {
compatible = "snps,dw-wdt";
reg = <0xffd00300 0x100>;
- interrupts = <0 118 4>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
resets = <&rst WATCHDOG1_RESET>;
clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>;
status = "disabled";
@@ -521,7 +548,7 @@ watchdog1: watchdog@ffd00300 {
watchdog2: watchdog@ffd00400 {
compatible = "snps,dw-wdt";
reg = <0xffd00400 0x100>;
- interrupts = <0 125 4>;
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
resets = <&rst WATCHDOG2_RESET>;
clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>;
status = "disabled";
@@ -530,7 +557,7 @@ watchdog2: watchdog@ffd00400 {
watchdog3: watchdog@ffd00500 {
compatible = "snps,dw-wdt";
reg = <0xffd00500 0x100>;
- interrupts = <0 126 4>;
+ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
resets = <&rst WATCHDOG3_RESET>;
clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>;
status = "disabled";
@@ -547,7 +574,7 @@ eccmgr {
altr,sysmgr-syscon = <&sysmgr>;
#address-cells = <1>;
#size-cells = <1>;
- interrupts = <0 15 4>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
ranges;
@@ -606,7 +633,7 @@ qspi: spi@ff8d2000 {
#size-cells = <0>;
reg = <0xff8d2000 0x100>,
<0xff900000 0x100000>;
- interrupts = <0 3 4>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
cdns,fifo-depth = <128>;
cdns,fifo-width = <4>;
cdns,trigger-address = <0x00000000>;
--
2.25.1
