In preparation for probing l3 with simple-pm-bus and genpd, we must move
l3 noc to a separate node. This is to prevent omap_l3_noc.c driver from
claiming the whole l3 instance before simple-pm-bus has a chance to probe.
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
arch/arm/boot/dts/omap4.dtsi | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -107,16 +107,20 @@ wakeupgen: interrupt-controller@48281000 {
* hierarchy.
*/
ocp {
- compatible = "ti,omap4-l3-noc", "simple-bus";
+ compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
- reg = <0x44000000 0x1000>,
- <0x44800000 0x2000>,
- <0x45000000 0x1000>;
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+ l3-noc@44000000 {
+ compatible = "ti,omap4-l3-noc";
+ reg = <0x44000000 0x1000>,
+ <0x44800000 0x2000>,
+ <0x45000000 0x1000>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ };
l4_wkup: interconnect@4a300000 {
};
--
2.30.1
