Hi Adrien, On 21-03-08 13:39, Adrien Grassein wrote: > Add the description for espi support. > > Signed-off-by: Adrien Grassein <adrien.grassein@xxxxxxxxx> > Reviewed-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx> > --- > .../boot/dts/freescale/imx8mm-nitrogen-r2.dts | 22 +++++++++++++++++++ > 1 file changed, 22 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts > index 4f4cf7df5a5a..0c5949b40eeb 100644 > --- a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts > +++ b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts > @@ -52,6 +52,19 @@ &A53_3 { > cpu-supply = <®_buck3>; > }; > > +/* J15 */ > +&ecspi2 { > + assigned-clocks = <&clk IMX8MM_CLK_ECSPI2>; > + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_40M>; > + assigned-clock-rates = <40000000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_ecspi2>; > + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; > + #address-cells = <1>; > + #size-cells = <0>; Nit: These two properties should be added to the base dtsi if not already done. Regards, Marco > + status = "okay"; > +}; > + > &fec1 { > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_fec1>; > @@ -286,6 +299,15 @@ &iomuxc { > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_hog>; > > + pinctrl_ecspi2: ecspi2grp { > + fsl,pins = < > + MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x140 > + MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x19 > + MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x19 > + MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x19 > + >; > + }; > + > pinctrl_fec1: fec1grp { > fsl,pins = < > MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 > -- > 2.25.1 > > > -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |