From: Quanyang Wang <quanyang.wang@xxxxxxxxxxxxx> The function of_i2c_get_board_info will call of_modalias_node to check if a device_node contains "compatible" string. But for the device si5328 at zcu102/zcu106 boards, there is no proper DT bindings for them. So remove si5328 device nodes from dts files to eliminate the error info in the boot message: i2c i2c-10: of_i2c: modalias failure on /axi/i2c@ff030000/i2c-mux@74/i2c@4/clock-generator@69 i2c i2c-10: Failed to create I2C device for /axi/i2c@ff030000/i2c-mux@74/i2c@4/clock-generator@69 Signed-off-by: Quanyang Wang <quanyang.wang@xxxxxxxxxxxxx> --- .../boot/dts/xilinx/zynqmp-zcu102-revA.dts | 20 +------------------ .../boot/dts/xilinx/zynqmp-zcu106-revA.dts | 20 +------------------ 2 files changed, 2 insertions(+), 38 deletions(-) diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts index 12e8bd48dc8c..eca6c2de84a7 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts @@ -580,25 +580,7 @@ i2c@4 { #address-cells = <1>; #size-cells = <0>; reg = <4>; - si5328: clock-generator@69 {/* SI5328 - u20 */ - reg = <0x69>; - /* - * Chip has interrupt present connected to PL - * interrupt-parent = <&>; - * interrupts = <>; - */ - #address-cells = <1>; - #size-cells = <0>; - #clock-cells = <1>; - clocks = <&refhdmi>; - clock-names = "xtal"; - clock-output-names = "si5328"; - - si5328_clk: clk0@0 { - reg = <0>; - clock-frequency = <27000000>; - }; - }; + /* SI5328 - u20 */ }; /* 5 - 7 unconnected */ }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts index 18771e868399..eff7c6447087 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts @@ -581,25 +581,7 @@ i2c@4 { #address-cells = <1>; #size-cells = <0>; reg = <4>; - si5328: clock-generator@69 {/* SI5328 - u20 */ - reg = <0x69>; - /* - * Chip has interrupt present connected to PL - * interrupt-parent = <&>; - * interrupts = <>; - */ - #address-cells = <1>; - #size-cells = <0>; - #clock-cells = <1>; - clocks = <&refhdmi>; - clock-names = "xtal"; - clock-output-names = "si5328"; - - si5328_clk: clk0@0 { - reg = <0>; - clock-frequency = <27000000>; - }; - }; + /* SI5328 - u20 */ }; i2c@5 { #address-cells = <1>; -- 2.25.1