Hi Laurent,
On 3/8/21 4:35 PM, Laurent Pinchart wrote:
Hi Quanyang,
Thank you for the patch.
On Mon, Mar 08, 2021 at 03:08:43PM +0800, quanyang.wang@xxxxxxxxxxxxx wrote:
From: Quanyang Wang <quanyang.wang@xxxxxxxxxxxxx>
The function of_i2c_get_board_info will call of_modalias_node to check
if a device_node contains "compatible" string. So let's assign the
proper string "silabs,si5328" to clock-generator@69's compatible
property to eliminate the error info as below:
As far as I can tell, "silabs,si5328" isn't documented in
Documentation/devicetree/bindings/. We need DT bindings before making
use of the compatible string.
Thank you for your review.
I will send a new patch to delete these device nodes.
Best Regards
Quanyang
i2c i2c-10: of_i2c: modalias failure on /axi/i2c@ff030000/i2c-mux@74/i2c@4/clock-generator@69
i2c i2c-10: Failed to create I2C device for /axi/i2c@ff030000/i2c-mux@74/i2c@4/clock-generator@69
Fixes: 82a7ebf00224 ("arm64: dts: zynqmp: Add DT description for si5328 for zcu102/zcu106")
Signed-off-by: Quanyang Wang <quanyang.wang@xxxxxxxxxxxxx>
---
arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts | 1 +
arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts | 1 +
2 files changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
index 12e8bd48dc8c..a73841ad24ce 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -590,6 +590,7 @@ si5328: clock-generator@69 {/* SI5328 - u20 */
#address-cells = <1>;
#size-cells = <0>;
#clock-cells = <1>;
+ compatible = "silabs,si5328";
clocks = <&refhdmi>;
clock-names = "xtal";
clock-output-names = "si5328";
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
index 18771e868399..24ce64364d63 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
@@ -591,6 +591,7 @@ si5328: clock-generator@69 {/* SI5328 - u20 */
#address-cells = <1>;
#size-cells = <0>;
#clock-cells = <1>;
+ compatible = "silabs,si5328";
clocks = <&refhdmi>;
clock-names = "xtal";
clock-output-names = "si5328";