qcom dts folder shows a bunch of dtbs_check warning, this is an attempt to fix some of them. Many are due to txt binding which should be fixed when we have the yaml binding documents. Few of them are fixed as below with missing nodes names, not properly using nodes. Vinod Koul (18): arm64: qcom: apq8016-sbc: drop qcom,sbc arm64: qcom: msm8916: don't use empty memory node dt-bindings: arm: qcom: Document ipq6018-cp01 board arm64: qcom: msm8994: don't use empty memory node dt-bindings: arm: qcom: Document sony boards for apq8094 dt-bindings: arm: qcom: Document alcatel,idol347 board dt-bindings: arm: qcom: Drop qcom,mtp arm64: qcom: msm8994: don't use underscore in node name arm64: qcom: msm8996: don't use underscore in node name arm64: qcom: sdm630: don't use underscore in node name arm64: qcom: sdm660: don't use underscore in node name arm64: qcom: msm8996: don't use empty memory node arm64: qcom: msm8998: don't use empty memory node arm64: qcom: sdm630: don't use empty memory node arm64: qcom: sdm660: don't use empty memory node arm64: qcom: ipq8074: fix pci node reg property arm64: qcom: sdm660: use reg value for memory node arm64: qcom: ipq6018: drop '0x' from unit address Documentation/devicetree/bindings/arm/qcom.yaml | 13 +++++++++++++ arch/arm64/boot/dts/qcom/apq8016-sbc.dts | 2 +- arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +- arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 2 +- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 16 ++++++++-------- arch/arm64/boot/dts/qcom/msm8916-mtp.dts | 3 +-- arch/arm64/boot/dts/qcom/msm8916.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/msm8994.dtsi | 8 ++++---- arch/arm64/boot/dts/qcom/msm8996.dtsi | 8 ++++---- arch/arm64/boot/dts/qcom/msm8998.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/sdm630.dtsi | 8 ++++---- arch/arm64/boot/dts/qcom/sdm660.dtsi | 8 ++++---- 12 files changed, 45 insertions(+), 33 deletions(-) -- 2.26.2
