The NT39016 panel is a fun beast, even though the documentation states
that the CS line is active-low, it will work just fine if the CS line is
configured as active-high, but it won't work if the CS line is forced
low or forced high.
Since it did actually work with the spi-cs-high property, this is not a
bugfix, but we should nonetheless remove that property from the example
to match the documentation.
Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
---
.../bindings/display/panel/kingdisplay,kd035g6-54nt.yaml | 1 -
1 file changed, 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml
index 6960036975fa..c45c92a3d41f 100644
--- a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml
+++ b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml
@@ -47,7 +47,6 @@ examples:
spi-max-frequency = <3125000>;
spi-3wire;
- spi-cs-high;
reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
--
2.30.1
