Commit f73558cc83d1 ("arm64: dts: qcom: sc7180: Disable charger
thermal zone for lazor") disables the charger thermal zone for
specific lazor revisions due to an unsupported thermistor type.
The initial idea was to disable the thermal zone for older
revisions and leave it enabled for newer ones that use a
supported thermistor. Finally the thermistor won't be changed
on newer revisions, hence the thermal zone should be disabled
for all lazor (and limozeen) revisions. Instead of disabling
it per revision do it once in the shared .dtsi for lazor.
Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts | 9 ---------
arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts | 9 ---------
arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts | 9 ---------
arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi | 9 +++++++++
4 files changed, 9 insertions(+), 27 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts
index 5c997cd90069..30e3e769d2b4 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts
@@ -14,15 +14,6 @@ / {
compatible = "google,lazor-rev0", "qcom,sc7180";
};
-/*
- * Lazor is stuffed with a 47k NTC as charger thermistor which currently is
- * not supported by the PM6150 ADC driver. Disable the charger thermal zone
- * to avoid using bogus temperature values.
- */
-&charger_thermal {
- status = "disabled";
-};
-
&pp3300_hub {
/* pp3300_l7c is used to power the USB hub */
/delete-property/regulator-always-on;
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
index d9fbcc7bc5bd..c2ef06367baf 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
@@ -14,15 +14,6 @@ / {
compatible = "google,lazor-rev1", "google,lazor-rev2", "qcom,sc7180";
};
-/*
- * Lazor is stuffed with a 47k NTC as charger thermistor which currently is
- * not supported by the PM6150 ADC driver. Disable the charger thermal zone
- * to avoid using bogus temperature values.
- */
-&charger_thermal {
- status = "disabled";
-};
-
&pp3300_hub {
/* pp3300_l7c is used to power the USB hub */
/delete-property/regulator-always-on;
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts
index 19e69adb9e04..1b9d2f46359e 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts
@@ -13,12 +13,3 @@ / {
model = "Google Lazor (rev3+)";
compatible = "google,lazor", "qcom,sc7180";
};
-
-/*
- * Lazor is stuffed with a 47k NTC as charger thermistor which currently is
- * not supported by the PM6150 ADC driver. Disable the charger thermal zone
- * to avoid using bogus temperature values.
- */
-&charger_thermal {
- status = "disabled";
-};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
index 89e5cd29ec09..aa2c4a9098db 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
@@ -58,6 +58,15 @@ ap_ts: touchscreen@10 {
};
};
+/*
+ * Lazor is stuffed with a 47k NTC as charger thermistor which currently is
+ * not supported by the PM6150 ADC driver. Disable the charger thermal zone
+ * to avoid using bogus temperature values.
+ */
+&charger_thermal {
+ status = "disabled";
+};
+
/* PINCTRL - modifications to sc7180-trogdor.dtsi */
&ts_reset_l {
--
2.30.1.766.gb4fecdf3b7-goog
