On 2/10/21 9:11 PM, Nava kishore Manne wrote:
> This patch adds support for Xilinx Dynamic Function eXchange(DFX) AXI
> shutdown manager IP. It can be used to safely handling the AXI traffic
> on a Reconfigurable Partition when it is undergoing dynamic reconfiguration
> and there by preventing system deadlock that may occur if AXI transactions
> are interrupted during reconfiguration.
>
> PR-Decoupler and AXI shutdown manager are completely different IPs.
> But both the IP registers are compatible and also both belong to the
> same sub-system (fpga-bridge).So using same driver for both IP's.
>
> Signed-off-by: Nava kishore Manne <nava.manne@xxxxxxxxxx>
> ---
> Changes for v2:
> -Fixed some minor coding issues as suggested by
> Tom Rix.
>
> drivers/fpga/Kconfig | 9 +++++++-
> drivers/fpga/xilinx-pr-decoupler.c | 37 ++++++++++++++++++++++++++----
> 2 files changed, 40 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
> index 5645226ca3ce..bf85b9a65ec2 100644
> --- a/drivers/fpga/Kconfig
> +++ b/drivers/fpga/Kconfig
> @@ -118,10 +118,17 @@ config XILINX_PR_DECOUPLER
> depends on FPGA_BRIDGE
> depends on HAS_IOMEM
> help
> - Say Y to enable drivers for Xilinx LogiCORE PR Decoupler.
> + Say Y to enable drivers for Xilinx LogiCORE PR Decoupler
> + or Xilinx Dynamic Function eXchnage AIX Shutdown Manager.
> The PR Decoupler exists in the FPGA fabric to isolate one
> region of the FPGA from the busses while that region is
> being reprogrammed during partial reconfig.
> + The Dynamic Function eXchange AXI shutdown manager prevents
> + AXI traffic from passing through the bridge. The controller
> + safely handles AXI4MM and AXI4-Lite interfaces on a
> + Reconfigurable Partition when it is undergoing dynamic
> + reconfiguration, preventing the system deadlock that can
> + occur if AXI transactions are interrupted by DFX.
>
> config FPGA_REGION
> tristate "FPGA Region"
> diff --git a/drivers/fpga/xilinx-pr-decoupler.c b/drivers/fpga/xilinx-pr-decoupler.c
> index 7d69af230567..78a6f5324193 100644
> --- a/drivers/fpga/xilinx-pr-decoupler.c
> +++ b/drivers/fpga/xilinx-pr-decoupler.c
> @@ -1,7 +1,7 @@
> // SPDX-License-Identifier: GPL-2.0-only
> /*
> * Copyright (c) 2017, National Instruments Corp.
> - * Copyright (c) 2017, Xilix Inc
> + * Copyright (c) 2017, Xilinx Inc
> *
> * FPGA Bridge Driver for the Xilinx LogiCORE Partial Reconfiguration
> * Decoupler IP Core.
> @@ -18,7 +18,12 @@
> #define CTRL_CMD_COUPLE 0
> #define CTRL_OFFSET 0
>
> +struct xlnx_config_data {
> + const char *name;
> +};
> +
> struct xlnx_pr_decoupler_data {
> + const struct xlnx_config_data *ipconfig;
> void __iomem *io_base;
> struct clk *clk;
> };
> @@ -76,15 +81,28 @@ static const struct fpga_bridge_ops xlnx_pr_decoupler_br_ops = {
> .enable_show = xlnx_pr_decoupler_enable_show,
> };
>
> +static const struct xlnx_config_data decoupler_config = {
> + .name = "Xilinx PR Decoupler",
> +};
> +
> +static const struct xlnx_config_data shutdown_config = {
> + .name = "Xilinx DFX AXI Shutdown Manager",
> +};
> +
> static const struct of_device_id xlnx_pr_decoupler_of_match[] = {
> - { .compatible = "xlnx,pr-decoupler-1.00", },
> - { .compatible = "xlnx,pr-decoupler", },
> + { .compatible = "xlnx,pr-decoupler-1.00", .data = &decoupler_config },
> + { .compatible = "xlnx,pr-decoupler", .data = &decoupler_config },
> + { .compatible = "xlnx,dfx-axi-shutdown-manager-1.00",
> + .data = &shutdown_config },
> + { .compatible = "xlnx,dfx-axi-shutdown-manager",
> + .data = &shutdown_config },
> {},
> };
> MODULE_DEVICE_TABLE(of, xlnx_pr_decoupler_of_match);
>
> static int xlnx_pr_decoupler_probe(struct platform_device *pdev)
> {
> + struct device_node *np = pdev->dev.of_node;
> struct xlnx_pr_decoupler_data *priv;
> struct fpga_bridge *br;
> int err;
> @@ -94,6 +112,14 @@ static int xlnx_pr_decoupler_probe(struct platform_device *pdev)
> if (!priv)
> return -ENOMEM;
>
> + if (np) {
> + const struct of_device_id *match;
> +
> + match = of_match_node(xlnx_pr_decoupler_of_match, np);
> + if (match && match->data)
> + priv->ipconfig = match->data;
> + }
> +
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> priv->io_base = devm_ioremap_resource(&pdev->dev, res);
> if (IS_ERR(priv->io_base))
> @@ -114,7 +140,7 @@ static int xlnx_pr_decoupler_probe(struct platform_device *pdev)
>
> clk_disable(priv->clk);
>
> - br = devm_fpga_bridge_create(&pdev->dev, "Xilinx PR Decoupler",
> + br = devm_fpga_bridge_create(&pdev->dev, priv->ipconfig->name,
> &xlnx_pr_decoupler_br_ops, priv);
> if (!br) {
> err = -ENOMEM;
> @@ -125,7 +151,8 @@ static int xlnx_pr_decoupler_probe(struct platform_device *pdev)
>
> err = fpga_bridge_register(br);
> if (err) {
> - dev_err(&pdev->dev, "unable to register Xilinx PR Decoupler");
> + dev_err(&pdev->dev, "unable to register %s",
> + priv->ipconfig->name);
> goto err_clk;
> }
>
The changes I asked for were made.
Reviewed-by: Tom Rix <trix@xxxxxxxxxx>
