On 28/02/2021 10.33, Andy Shevchenko wrote: > On Sun, Feb 28, 2021 at 11:29 AM Andy Shevchenko > <andy.shevchenko@xxxxxxxxx> wrote: >> >> On Sun, Feb 28, 2021 at 11:07 AM Andy Shevchenko >> <andy.shevchenko@xxxxxxxxx> wrote: >>> On Friday, February 26, 2021, Rasmus Villemoes <linux@xxxxxxxxxxxxxxxxxx> wrote: >>>> >>>> The only purpose of this driver is to serve as a consumer of the input >>>> clock, to prevent it from being disabled by clk_disable_unused(). >>> >>> We have a clock API to do the same (something like marking it used or so) why do you need a driver? >> >> Example: >> https://elixir.bootlin.com/linux/latest/source/drivers/platform/x86/pmc_atom.c#L365 >> >> If it's a DT based platform I think you can make it somehow work thru DT. > > Okay, briefly looking at the state of affairs [1] seems like you need > to hack it into clock provider. > > [1]: https://elixir.bootlin.com/linux/latest/C/ident/CLK_IS_CRITICAL > I did find CLK_IS_CRITICAL and CLK_IGNORE_UNUSED while trying to figure out how to handle this. However, while CLK_IS_CRITICAL is in principle settable via DT, the comment above of_clk_detect_critical() seems to make it clear that adding a call of that from the RTC driver is a total no-no. CLK_IGNORE_UNUSED can't be set at all from DT, and wouldn't solve the problem fully - while we can and do make sure the bootloader sets the appropriate bit in the RTCs registers, it's more robust if we also ensure the kernel explicitly enables the clock. But if there is some way to do this within the clk framework/existing bindings, I'm all ears - that's the reason I cc'ed the clk list. Rasmus
