Add DT node for the single USB subsystem in main dtsi file. Signed-off-by: Aswath Govindraju <a-govindraju@xxxxxx> Acked-by: Roger Quadros <rogerq@xxxxxx> --- arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 30 ++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi index 5f85950daef7..a36ebddf3a4c 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi @@ -402,4 +402,34 @@ ti,otap-del-sel-ddr50 = <0x9>; ti,clkbuf-sel = <0x7>; }; + + usbss0: cdns-usb@f900000{ + compatible = "ti,am64-usb", "ti,j721e-usb"; + reg = <0x00 0xf900000 0x00 0x100>; + power-domains = <&k3_pds 161 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 161 9>, <&k3_clks 161 1>; + clock-names = "ref", "lpm"; + assigned-clocks = <&k3_clks 161 9>; /* USB2_REFCLK */ + assigned-clock-parents = <&k3_clks 161 10>; /* HF0SC0 */ + #address-cells = <2>; + #size-cells = <2>; + ranges; + usb0: usb@f400000{ + compatible = "cdns,usb3"; + reg = <0x00 0xf400000 0x00 0x10000>, + <0x00 0xf410000 0x00 0x10000>, + <0x00 0xf420000 0x00 0x10000>; + reg-names = "otg", + "xhci", + "dev"; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */ + <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, /* irq.6 */ + <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; /* otgirq */ + interrupt-names = "host", + "peripheral", + "otg"; + maximum-speed = "super-speed"; + dr_mode = "otg"; + }; + }; }; -- 2.17.1