Add SDHCI1 device to allow for usage of (more often than not) eMMC.
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 17a7e2a0c730..c45350cefdc8 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -2308,6 +2308,29 @@ hsusb_phy2: phy@7412000 {
status = "disabled";
};
+ sdhc1: sdhci@7464900 {
+ compatible = "qcom,sdhci-msm-v4";
+ reg = <0x07464900 0x11c>, <0x07464000 0x800>;
+ reg-names = "hc_mem", "core_mem";
+
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clock-names = "iface", "core", "xo";
+ clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+ <&gcc GCC_SDCC1_APPS_CLK>,
+ <&xo_board>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc1_state_on>;
+ pinctrl-1 = <&sdc1_state_off>;
+
+ bus-width = <8>;
+ non-removable;
+ status = "disabled";
+ };
+
sdhc2: sdhci@74a4900 {
status = "disabled";
compatible = "qcom,sdhci-msm-v4";
--
2.30.1
