On Fri, Feb 26, 2021 at 12:54:02AM +0530, Jagan Teki wrote:
> Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier
> board.
>
> Genaral features:
> - Ethernet 10/100
> - Wifi/BT
> - USB Type A/OTG
> - Audio Out
> - CAN
> - LVDS panel connector
>
> i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam.
>
> i.Core MX8M Mini needs to mount on top of this Carrier board for
> creating complete i.Core MX8M Mini C.TOUCH 2.0 board.
>
> Add support for it.
>
> Signed-off-by: Matteo Lisi <matteo.lisi@xxxxxxxxxxx>
> Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
> ---
Reviewed-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
Best regards,
Krzysztof
> + };
> +};
> +
> +&uart2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart2>;
> + status = "okay";
> +};
> +
> +/* SD */
> +&usdhc1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
> + cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
> + max-frequency = <50000000>;
> + bus-width = <4>;
> + no-1-8-v;
> + pm-ignore-notify;
> + keep-power-in-suspend;
> + status = "okay";
> +};
> --
> 2.25.1
>
