Hi, This is v4 of the series to add initial support for the latest new SoC, AM642, from Texas Instruments. Additional detail can be found in the patch descriptions, also see AM64X Technical Reference Manual (SPRUIM2, Nov 2020) for further details: https://www.ti.com/lit/pdf/spruim2 This version contains a few minor fixes from v3: * Add Rob's Ack to patch 2 * Drop address-cells from interrupt controller node in patch 4 as [1] was dropped * Add Suman's Signed-off-by to patch 3 * Fix date range in Makefile for TI dtbs in patch 5 * Include Reviewed-by from several people from v3 for multiple patches v3: https://lore.kernel.org/linux-arm-kernel/20210120202532.9011-1-d-gerlach@xxxxxx/ v2: https://lore.kernel.org/linux-arm-kernel/20210119163927.774-1-d-gerlach@xxxxxx/ v1: https://lore.kernel.org/linux-arm-kernel/20201125052004.17823-1-d-gerlach@xxxxxx/ Regards, Dave [1] https://lore.kernel.org/linux-arm-kernel/161131973654.21299.8023411678794984222.b4-ty@xxxxxx/ Dave Gerlach (4): dt-bindings: arm: ti: Add bindings for AM642 SoC dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM64 arm64: dts: ti: Add support for AM642 SoC arm64: dts: ti: Add support for AM642 EVM Peter Ujfalusi (1): arm64: dts: ti: k3-am64-main: Enable DMA support .../devicetree/bindings/arm/ti/k3.yaml | 6 + arch/arm64/boot/dts/ti/Makefile | 4 +- arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 405 ++++++++++++++++++ arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi | 76 ++++ arch/arm64/boot/dts/ti/k3-am64.dtsi | 103 +++++ arch/arm64/boot/dts/ti/k3-am642-evm.dts | 246 +++++++++++ arch/arm64/boot/dts/ti/k3-am642.dtsi | 65 +++ include/dt-bindings/pinctrl/k3.h | 5 +- 8 files changed, 908 insertions(+), 2 deletions(-) create mode 100644 arch/arm64/boot/dts/ti/k3-am64-main.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-am64.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-am642-evm.dts create mode 100644 arch/arm64/boot/dts/ti/k3-am642.dtsi -- 2.28.0
