Hi Fabrizio,
Thank you for the patch.
On Fri, Feb 26, 2021 at 09:45:20AM +0100, Geert Uytterhoeven wrote:
> On Thu, Feb 25, 2021 at 11:53 PM Fabrizio Castro wrote:
> > This patch adds the DAB clock to the R8A77965 SoC.
> >
> > Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@xxxxxxxxxxx>
>
> Thanks for your patch!
>
> > --- a/drivers/clk/renesas/r8a77965-cpg-mssr.c
> > +++ b/drivers/clk/renesas/r8a77965-cpg-mssr.c
> > @@ -250,6 +250,7 @@ static const struct mssr_mod_clk r8a77965_mod_clks[] __initconst = {
> > DEF_MOD("ssi2", 1013, MOD_CLK_ID(1005)),
> > DEF_MOD("ssi1", 1014, MOD_CLK_ID(1005)),
> > DEF_MOD("ssi0", 1015, MOD_CLK_ID(1005)),
> > + DEF_MOD("dab", 1016, R8A77965_CLK_S0D6),
>
> Unfortunately this bit is not documented in the R-Car Gen3 Hardware
> User's Manual, so I have to trust you on this.
>
> While it's not unusual that the same module on R-Car E3 and M3-N
> has different parent clocks, it does strike me as odd that S0D6 on M3-N
> runs at 133 MHz, while S3D1 on E3 runs at 266 MHz.
> Probably it doesn't matter that much, as your driver doesn't care
> about the actual clock rate.
I have the exact same concerns, here and for 1/7.
> > DEF_MOD("scu-all", 1017, R8A77965_CLK_S3D4),
> > DEF_MOD("scu-dvc1", 1018, MOD_CLK_ID(1017)),
> > DEF_MOD("scu-dvc0", 1019, MOD_CLK_ID(1017)),
--
Regards,
Laurent Pinchart
