Hi, On Thu, Feb 25, 2021 at 2:13 PM Douglas Anderson <dianders@xxxxxxxxxxxx> wrote: > > This is a trogdor variant. This is mostly a grab from the downstream > tree with notable exceptions: > - I skip -rev0. This was a super early build and there's no advantage > of long term support. > - In -rev1 I translate the handling of the USB hub like is done for > similar boards. See the difference between the downstream and > upstream 'sc7180-trogdor-lazor-r0.dts' for an example. This will > need to be resolved when proper support for the USB hub is figured > out upstream. > - I remove sound node since sound hasn't landed upstream yet. > - In incorporate the pending <https://crrev.com/c/2719075> for the > keyboard. > > Cc: Philip Chen <philipchen@xxxxxxxxxx> > Cc: Matthias Kaehlcke <mka@xxxxxxxxxxxx> > Cc: Stephen Boyd <swboyd@xxxxxxxxxxxx> > Cc: Tzung-Bi Shih <tzungbi@xxxxxxxxxxxx> > Cc: Judy Hsiao <judyhsiao@xxxxxxxxxxxx> > Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx> > --- > > arch/arm64/boot/dts/qcom/Makefile | 4 + > .../dts/qcom/sc7180-trogdor-pompom-r1-lte.dts | 14 + > .../dts/qcom/sc7180-trogdor-pompom-r1.dts | 26 ++ > .../dts/qcom/sc7180-trogdor-pompom-r2-lte.dts | 14 + > .../dts/qcom/sc7180-trogdor-pompom-r2.dts | 44 +++ > .../boot/dts/qcom/sc7180-trogdor-pompom.dtsi | 288 ++++++++++++++++++ > 6 files changed, 390 insertions(+) As always I see a typo right after I hit send. ${SUBJECT} should be "trogdor-pompom", not "lazor-pompom" for this and the next patch. I copy/pastad from the previous patch (limozeen _is_ actually a lazor) and didn't adjust properly. I'm happy with any: * to spin a -r2 * for Bjorn to fix when landing * for this just to land since it's a harmless typo. In any case I won't spin for now but I wanted to reply so if I do spin for another reason I'll won't forget. ;-) -Doug
