From: Liam Beguin <lvb@xxxxxxxxxx>
Hi,
The LMK04832 is an ultra-high performance clock conditioner with JEDEC
JESD204B support and is also pin compatible with the LMK0482x family of
devices.
This driver adds initial support to configure the LMK04832 clocks using
the clock framework.
This has been tested on a system using JESD204B subclass 1.
At the moment, the VCO rate has to be set manually from the devicetree
and a dclk (or sclk) rate change isn't propagated to the VCO
automatically.
Changes since v1:
- add yaml devicetree documentation,
- add links to datasheet,
- use {u8,u16,u32} instead of Uint_ variants,
- drop redundant debugfs code,
- use a pointer to device_info instead of struct copy,
- add of_device_id table,
- add support for SYSREF digital delay and JESD204B subclass 1
Changes since v2:
- fix dt-bindings documentation, apologies for the broken build
- fix property vendor prefixes
- split dt-bindings into a separate patch
Thanks for your time,
Liam
Liam Beguin (3):
clk: add support for the lmk04832
clk: lmk04832: add support for digital delay
dt-bindings: clock: add ti,lmk04832 bindings
.../bindings/clock/ti,lmk04832.yaml | 198 ++
drivers/clk/Kconfig | 7 +
drivers/clk/Makefile | 1 +
drivers/clk/clk-lmk04832.c | 1595 +++++++++++++++++
4 files changed, 1801 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/ti,lmk04832.yaml
create mode 100644 drivers/clk/clk-lmk04832.c
Interdiff against v2:
diff --git a/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml b/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml
index 9c56e37214e4..c0d9ab650e80 100644
--- a/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml
+++ b/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml
@@ -27,44 +27,38 @@ properties:
const: 1
clocks:
- maxItems: 1
items:
- description: PLL2 reference clock.
clock-names:
- maxItems: 1
items:
- const: oscin
reset-gpios:
- description: A connection of the 'reset' gpio line.
maxItems: 1
- lmk,spi-4wire-rdbk:
+ ti,spi-4wire-rdbk:
description: |
Select SPI 4wire readback pin configuration.
Available readback pins are,
CLKin_SEL0 0
CLKin_SEL1 1
RESET 2
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [0, 1, 2]
- - default: 1
-
- lmk,vco-rate:
- description: VCO rate to use (in Hz).
$ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2]
+ default: 1
- lmk,sysref-ddly:
+ ti,vco-hz:
+ description: Optional to set VCO frequency of the PLL in Hertz.
+
+ ti,sysref-ddly:
description: SYSREF digital delay value.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - minimum: 8
- - maximum: 8191
- - default: 8
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 8
+ maximum: 8191
+ default: 8
- lmk,sysref-mux:
+ ti,sysref-mux:
description: |
SYSREF Mux configuration.
Available options are,
@@ -72,28 +66,25 @@ properties:
Re-clocked 1
SYSREF Pulser 2
SYSREF Continuous 3
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [0, 1, 2, 3]
- - default: 3
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 3
- lmk,sync-mode:
+ ti,sync-mode:
description: SYNC pin configuration.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [0, 1, 2]
- - default: 1
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2]
+ default: 1
- lmk,sysref-pulse-count:
+ ti,sysref-pulse-count:
description:
Number of SYSREF pulses to send when SYSREF is not in continuous mode.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [1, 2, 4, 8]
- - default: 4
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 2, 4, 8]
+ default: 4
patternProperties:
- "^.*@[0-9a-f]+$":
+ "@[0-9a-d]+$":
type: object
description:
Child nodes used to configure output clocks.
@@ -105,7 +96,7 @@ patternProperties:
minimum: 0
maximum: 13
- lmk,clkout-fmt:
+ ti,clkout-fmt:
description:
Clock output format.
Available options are,
@@ -125,12 +116,11 @@ patternProperties:
CMOS (Inverted/Normal) 0x0d
CMOS (Normal/Inverted) 0x0e
CMOS (Normal/Normal) 0x0f
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - minimum: 0
- - maximum: 15
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
- lmk,clkout-sysref:
+ ti,clkout-sysref:
description:
Select SYSREF clock path for output clock.
type: boolean
@@ -142,6 +132,8 @@ required:
- compatible
- reg
- '#clock-cells'
+ - clocks
+ - clock-names
additionalProperties: false
@@ -157,45 +149,50 @@ examples:
};
};
- lmk04832: lmk04832@0 {
- reg = <0>;
+ spi0 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "ti,lmk04832";
- spi-max-frequency = <781250>;
-
- reset-gpios = <&gpio_lmk 0 0 0>;
-
- #clock-cells = <1>;
- clocks = <&lmk04832_oscin>;
- clock-names = "oscin";
-
- lmk,spi-4wire-rdbk = <0>;
- lmk,vco-rate = <2457600000>;
-
- assigned-clocks =
- <&lmk04832 0>, <&lmk04832 1>,
- <&lmk04832 2>, <&lmk04832 3>,
- <&lmk04832 4>,
- <&lmk04832 6>, <&lmk04832 7>,
- <&lmk04832 10>, <&lmk04832 11>;
- assigned-clock-rates =
- <122880000>, <384000>,
- <122880000>, <384000>,
- <122880000>,
- <153600000>, <384000>,
- <614400000>, <384000>;
-
- clkout0@0 {
- reg = <0>;
- lmk,clkout-fmt = <0x01>; // LVDS
- };
-
- clkout1@1 {
- reg = <1>;
- lmk,clkout-fmt = <0x01>; // LVDS
- lmk,clkout-sysref;
- };
- };
-
+ lmk04832: clock-controller@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0>;
+
+ compatible = "ti,lmk04832";
+ spi-max-frequency = <781250>;
+
+ reset-gpios = <&gpio_lmk 0 0 0>;
+
+ #clock-cells = <1>;
+ clocks = <&lmk04832_oscin>;
+ clock-names = "oscin";
+
+ ti,spi-4wire-rdbk = <0>;
+ ti,vco-hz = <2457600000>;
+
+ assigned-clocks =
+ <&lmk04832 0>, <&lmk04832 1>,
+ <&lmk04832 2>, <&lmk04832 3>,
+ <&lmk04832 4>,
+ <&lmk04832 6>, <&lmk04832 7>,
+ <&lmk04832 10>, <&lmk04832 11>;
+ assigned-clock-rates =
+ <122880000>, <384000>,
+ <122880000>, <384000>,
+ <122880000>,
+ <153600000>, <384000>,
+ <614400000>, <384000>;
+
+ clkout0@0 {
+ reg = <0>;
+ ti,clkout-fmt = <0x01>; // LVDS
+ };
+
+ clkout1@1 {
+ reg = <1>;
+ ti,clkout-fmt = <0x01>; // LVDS
+ ti,clkout-sysref;
+ };
+ };
+ };
diff --git a/drivers/clk/clk-lmk04832.c b/drivers/clk/clk-lmk04832.c
index e0f01aacc8f4..5393088fa68e 100644
--- a/drivers/clk/clk-lmk04832.c
+++ b/drivers/clk/clk-lmk04832.c
@@ -1444,21 +1444,21 @@ static int lmk04832_probe(struct spi_device *spi)
goto err_disable_oscin;
}
- device_property_read_u32(lmk->dev, "lmk,vco-rate", &lmk->vco_rate);
+ device_property_read_u32(lmk->dev, "ti,vco-hz", &lmk->vco_rate);
lmk->sysref_ddly = 8;
- device_property_read_u32(lmk->dev, "lmk,sysref-ddly", &lmk->sysref_ddly);
+ device_property_read_u32(lmk->dev, "ti,sysref-ddly", &lmk->sysref_ddly);
lmk->sysref_mux = LMK04832_VAL_SYSREF_MUX_CONTINUOUS;
- device_property_read_u32(lmk->dev, "lmk,sysref-mux",
+ device_property_read_u32(lmk->dev, "ti,sysref-mux",
&lmk->sysref_mux);
lmk->sync_mode = LMK04832_VAL_SYNC_MODE_OFF;
- device_property_read_u32(lmk->dev, "lmk,sync-mode",
+ device_property_read_u32(lmk->dev, "ti,sync-mode",
&lmk->sync_mode);
lmk->sysref_pulse_cnt = 4;
- device_property_read_u32(lmk->dev, "lmk,sysref-pulse-count",
+ device_property_read_u32(lmk->dev, "ti,sysref-pulse-count",
&lmk->sysref_pulse_cnt);
for_each_child_of_node(lmk->dev->of_node, child) {
@@ -1471,7 +1471,7 @@ static int lmk04832_probe(struct spi_device *spi)
goto err_disable_oscin;
}
- of_property_read_u32(child, "lmk,clkout-fmt",
+ of_property_read_u32(child, "ti,clkout-fmt",
&lmk->clkout[reg].format);
if (lmk->clkout[reg].format >= 0x0a && reg % 2 == 0
@@ -1480,7 +1480,7 @@ static int lmk04832_probe(struct spi_device *spi)
reg);
lmk->clkout[reg].sysref =
- of_property_read_bool(child, "lmk,clkout-sysref");
+ of_property_read_bool(child, "ti,clkout-sysref");
};
lmk->regmap = devm_regmap_init_spi(spi, ®map_config);
@@ -1495,7 +1495,7 @@ static int lmk04832_probe(struct spi_device *spi)
regmap_write(lmk->regmap, LMK04832_REG_RST3W, LMK04832_BIT_RESET);
if (!(spi->mode & SPI_3WIRE)) {
- device_property_read_u32(lmk->dev, "lmk,spi-4wire-rdbk",
+ device_property_read_u32(lmk->dev, "ti,spi-4wire-rdbk",
&rdbk_pin);
ret = lmk04832_set_spi_rdbk(lmk, rdbk_pin);
if (ret)
base-commit: f40ddce88593482919761f74910f42f4b84c004b
--
2.30.1.489.g328c10930387
