SAMA7G5's I2S-MCC has 4 pairs of DIN/DOUT pins. Since TDM only uses a
single pair of pins for synchronous capture and playback, the controller
needs to be told which of the pair is connected. This can be mentioned
using the new "microchip,tdm-data-pair" property. The property is optional,
needed only if TDM is used, and if it's missing DIN/DOUT 0 pins will be
used by default.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@xxxxxxxxxxxxx>
---
.../devicetree/bindings/sound/mchp,i2s-mcc.yaml | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/mchp,i2s-mcc.yaml b/Documentation/devicetree/bindings/sound/mchp,i2s-mcc.yaml
index a8a73f3ed473..0481315cb5f2 100644
--- a/Documentation/devicetree/bindings/sound/mchp,i2s-mcc.yaml
+++ b/Documentation/devicetree/bindings/sound/mchp,i2s-mcc.yaml
@@ -57,6 +57,23 @@ properties:
- const: tx
- const: rx
+ microchip,tdm-data-pair:
+ description:
+ Represents the DIN/DOUT pair pins that are used to receive/send
+ TDM data. It is optional and it is only needed if the controller
+ uses the TDM mode.
+ $ref: /schemas/types.yaml#/definitions/uint8
+ enum: [0, 1, 2, 3]
+ default: 0
+
+if:
+ properties:
+ compatible:
+ const: microchip,sam9x60-i2smcc
+then:
+ properties:
+ microchip,tdm-data-pair: false
+
required:
- "#sound-dai-cells"
- compatible
--
2.27.0
