[PATCH v19 10/13] powerpc: Move arch independent ima kexec functions to drivers/of/kexec.c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The functions defined in "arch/powerpc/kexec/ima.c" handle setting up
and freeing the resources required to carry over the IMA measurement
list from the current kernel to the next kernel across kexec system call.
These functions do not have architecture specific code, but are
currently limited to powerpc.

Move remove_ima_buffer() and setup_ima_buffer() calls into
of_kexec_alloc_and_setup_fdt() defined in "drivers/of/kexec.c".

Move the remaining architecture independent functions from
"arch/powerpc/kexec/ima.c" to "drivers/of/kexec.c".
Delete "arch/powerpc/kexec/ima.c" and "arch/powerpc/include/asm/ima.h".
Remove references to the deleted files and functions in powerpc and
in ima.

Co-developed-by: Prakhar Srivastava <prsriva@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Prakhar Srivastava <prsriva@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Lakshmi Ramasubramanian <nramas@xxxxxxxxxxxxxxxxxxx>
Reviewed-by: Thiago Jung Bauermann <bauerman@xxxxxxxxxxxxx>
Tested-by: Thiago Jung Bauermann <bauerman@xxxxxxxxxxxxx>
---
 arch/powerpc/include/asm/ima.h     |  27 ----
 arch/powerpc/include/asm/kexec.h   |   3 -
 arch/powerpc/kexec/Makefile        |   7 -
 arch/powerpc/kexec/file_load.c     |  25 ---
 arch/powerpc/kexec/file_load_64.c  |   4 -
 arch/powerpc/kexec/ima.c           | 202 ------------------------
 drivers/of/kexec.c                 | 240 +++++++++++++++++++++++++++++
 include/linux/of.h                 |   2 +
 security/integrity/ima/ima.h       |   4 -
 security/integrity/ima/ima_kexec.c |   1 +
 10 files changed, 243 insertions(+), 272 deletions(-)
 delete mode 100644 arch/powerpc/include/asm/ima.h
 delete mode 100644 arch/powerpc/kexec/ima.c

diff --git a/arch/powerpc/include/asm/ima.h b/arch/powerpc/include/asm/ima.h
deleted file mode 100644
index 51f64fd06c19..000000000000
--- a/arch/powerpc/include/asm/ima.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_POWERPC_IMA_H
-#define _ASM_POWERPC_IMA_H
-
-struct kimage;
-
-int ima_get_kexec_buffer(void **addr, size_t *size);
-int ima_free_kexec_buffer(void);
-
-#ifdef CONFIG_IMA
-void remove_ima_buffer(void *fdt, int chosen_node);
-#else
-static inline void remove_ima_buffer(void *fdt, int chosen_node) {}
-#endif
-
-#ifdef CONFIG_IMA_KEXEC
-int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node);
-#else
-static inline int setup_ima_buffer(const struct kimage *image, void *fdt,
-				   int chosen_node)
-{
-	remove_ima_buffer(fdt, chosen_node);
-	return 0;
-}
-#endif /* CONFIG_IMA_KEXEC */
-
-#endif /* _ASM_POWERPC_IMA_H */
diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h
index 4d2c9b5087e1..1af7b5962bb9 100644
--- a/arch/powerpc/include/asm/kexec.h
+++ b/arch/powerpc/include/asm/kexec.h
@@ -115,9 +115,6 @@ char *setup_kdump_cmdline(struct kimage *image, char *cmdline,
 int setup_purgatory(struct kimage *image, const void *slave_code,
 		    const void *fdt, unsigned long kernel_load_addr,
 		    unsigned long fdt_load_addr);
-int setup_new_fdt(const struct kimage *image, void *fdt,
-		  unsigned long initrd_load_addr, unsigned long initrd_len,
-		  const char *cmdline);
 int delete_fdt_mem_rsv(void *fdt, unsigned long start, unsigned long size);
 
 #ifdef CONFIG_PPC64
diff --git a/arch/powerpc/kexec/Makefile b/arch/powerpc/kexec/Makefile
index 4aff6846c772..b6c52608cb49 100644
--- a/arch/powerpc/kexec/Makefile
+++ b/arch/powerpc/kexec/Makefile
@@ -9,13 +9,6 @@ obj-$(CONFIG_PPC32)		+= relocate_32.o
 
 obj-$(CONFIG_KEXEC_FILE)	+= file_load.o ranges.o file_load_$(BITS).o elf_$(BITS).o
 
-ifdef CONFIG_HAVE_IMA_KEXEC
-ifdef CONFIG_IMA
-obj-y				+= ima.o
-endif
-endif
-
-
 # Disable GCOV, KCOV & sanitizers in odd or sensitive code
 GCOV_PROFILE_core_$(BITS).o := n
 KCOV_INSTRUMENT_core_$(BITS).o := n
diff --git a/arch/powerpc/kexec/file_load.c b/arch/powerpc/kexec/file_load.c
index c6bbd06d13e2..dc28cb7813c8 100644
--- a/arch/powerpc/kexec/file_load.c
+++ b/arch/powerpc/kexec/file_load.c
@@ -19,7 +19,6 @@
 #include <linux/of_fdt.h>
 #include <linux/libfdt.h>
 #include <asm/setup.h>
-#include <asm/ima.h>
 
 #define SLAVE_CODE_SIZE		256	/* First 0x100 bytes */
 
@@ -140,27 +139,3 @@ int delete_fdt_mem_rsv(void *fdt, unsigned long start, unsigned long size)
 
 	return -ENOENT;
 }
-
-/*
- * setup_new_fdt - modify /chosen and memory reservation for the next kernel
- * @image:		kexec image being loaded.
- * @fdt:		Flattened device tree for the next kernel.
- * @initrd_load_addr:	Address where the next initrd will be loaded.
- * @initrd_len:		Size of the next initrd, or 0 if there will be none.
- * @cmdline:		Command line for the next kernel, or NULL if there will
- *			be none.
- *
- * Return: 0 on success, or negative errno on error.
- */
-int setup_new_fdt(const struct kimage *image, void *fdt,
-		  unsigned long initrd_load_addr, unsigned long initrd_len,
-		  const char *cmdline)
-{
-	int ret;
-
-	ret = setup_ima_buffer(image, fdt, fdt_path_offset(fdt, "/chosen"));
-	if (ret)
-		pr_err("Error setting up the new device tree.\n");
-
-	return ret;
-}
diff --git a/arch/powerpc/kexec/file_load_64.c b/arch/powerpc/kexec/file_load_64.c
index 733226fd7bcf..5514f0b2ec95 100644
--- a/arch/powerpc/kexec/file_load_64.c
+++ b/arch/powerpc/kexec/file_load_64.c
@@ -944,10 +944,6 @@ int setup_new_fdt_ppc64(const struct kimage *image, void *fdt,
 	struct crash_mem *umem = NULL, *rmem = NULL;
 	int i, nr_ranges, ret;
 
-	ret = setup_new_fdt(image, fdt, initrd_load_addr, initrd_len, cmdline);
-	if (ret)
-		goto out;
-
 	/*
 	 * Restrict memory usage for kdump kernel by setting up
 	 * usable memory ranges and memory reserve map.
diff --git a/arch/powerpc/kexec/ima.c b/arch/powerpc/kexec/ima.c
deleted file mode 100644
index ed38125e2f87..000000000000
--- a/arch/powerpc/kexec/ima.c
+++ /dev/null
@@ -1,202 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2016 IBM Corporation
- *
- * Authors:
- * Thiago Jung Bauermann <bauerman@xxxxxxxxxxxxxxxxxx>
- */
-
-#include <linux/slab.h>
-#include <linux/kexec.h>
-#include <linux/of.h>
-#include <linux/memblock.h>
-#include <linux/libfdt.h>
-
-static int get_addr_size_cells(int *addr_cells, int *size_cells)
-{
-	struct device_node *root;
-
-	root = of_find_node_by_path("/");
-	if (!root)
-		return -EINVAL;
-
-	*addr_cells = of_n_addr_cells(root);
-	*size_cells = of_n_size_cells(root);
-
-	of_node_put(root);
-
-	return 0;
-}
-
-static int do_get_kexec_buffer(const void *prop, int len, unsigned long *addr,
-			       size_t *size)
-{
-	int ret, addr_cells, size_cells;
-
-	ret = get_addr_size_cells(&addr_cells, &size_cells);
-	if (ret)
-		return ret;
-
-	if (len < 4 * (addr_cells + size_cells))
-		return -ENOENT;
-
-	*addr = of_read_number(prop, addr_cells);
-	*size = of_read_number(prop + 4 * addr_cells, size_cells);
-
-	return 0;
-}
-
-/**
- * ima_get_kexec_buffer - get IMA buffer from the previous kernel
- * @addr:	On successful return, set to point to the buffer contents.
- * @size:	On successful return, set to the buffer size.
- *
- * Return: 0 on success, negative errno on error.
- */
-int ima_get_kexec_buffer(void **addr, size_t *size)
-{
-	int ret, len;
-	unsigned long tmp_addr;
-	size_t tmp_size;
-	const void *prop;
-
-	prop = of_get_property(of_chosen, "linux,ima-kexec-buffer", &len);
-	if (!prop)
-		return -ENOENT;
-
-	ret = do_get_kexec_buffer(prop, len, &tmp_addr, &tmp_size);
-	if (ret)
-		return ret;
-
-	*addr = __va(tmp_addr);
-	*size = tmp_size;
-
-	return 0;
-}
-
-/**
- * ima_free_kexec_buffer - free memory used by the IMA buffer
- */
-int ima_free_kexec_buffer(void)
-{
-	int ret;
-	unsigned long addr;
-	size_t size;
-	struct property *prop;
-
-	prop = of_find_property(of_chosen, "linux,ima-kexec-buffer", NULL);
-	if (!prop)
-		return -ENOENT;
-
-	ret = do_get_kexec_buffer(prop->value, prop->length, &addr, &size);
-	if (ret)
-		return ret;
-
-	ret = of_remove_property(of_chosen, prop);
-	if (ret)
-		return ret;
-
-	return memblock_free(addr, size);
-
-}
-
-/**
- * remove_ima_buffer - remove the IMA buffer property and reservation from @fdt
- *
- * The IMA measurement buffer is of no use to a subsequent kernel, so we always
- * remove it from the device tree.
- */
-void remove_ima_buffer(void *fdt, int chosen_node)
-{
-	int ret, len;
-	unsigned long addr;
-	size_t size;
-	const void *prop;
-
-	prop = fdt_getprop(fdt, chosen_node, "linux,ima-kexec-buffer", &len);
-	if (!prop)
-		return;
-
-	ret = do_get_kexec_buffer(prop, len, &addr, &size);
-	fdt_delprop(fdt, chosen_node, "linux,ima-kexec-buffer");
-	if (ret)
-		return;
-
-	ret = delete_fdt_mem_rsv(fdt, addr, size);
-	if (!ret)
-		pr_debug("Removed old IMA buffer reservation.\n");
-}
-
-#ifdef CONFIG_IMA_KEXEC
-static int write_number(void *p, u64 value, int cells)
-{
-	if (cells == 1) {
-		u32 tmp;
-
-		if (value > U32_MAX)
-			return -EINVAL;
-
-		tmp = cpu_to_be32(value);
-		memcpy(p, &tmp, sizeof(tmp));
-	} else if (cells == 2) {
-		u64 tmp;
-
-		tmp = cpu_to_be64(value);
-		memcpy(p, &tmp, sizeof(tmp));
-	} else
-		return -EINVAL;
-
-	return 0;
-}
-
-/**
- * setup_ima_buffer - add IMA buffer information to the fdt
- * @image:		kexec image being loaded.
- * @fdt:		Flattened device tree for the next kernel.
- * @chosen_node:	Offset to the chosen node.
- *
- * Return: 0 on success, or negative errno on error.
- */
-int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node)
-{
-	int ret, addr_cells, size_cells, entry_size;
-	u8 value[16];
-
-	remove_ima_buffer(fdt, chosen_node);
-	if (!image->ima_buffer_size)
-		return 0;
-
-	ret = get_addr_size_cells(&addr_cells, &size_cells);
-	if (ret)
-		return ret;
-
-	entry_size = 4 * (addr_cells + size_cells);
-
-	if (entry_size > sizeof(value))
-		return -EINVAL;
-
-	ret = write_number(value, image->ima_buffer_addr, addr_cells);
-	if (ret)
-		return ret;
-
-	ret = write_number(value + 4 * addr_cells, image->ima_buffer_size,
-			   size_cells);
-	if (ret)
-		return ret;
-
-	ret = fdt_setprop(fdt, chosen_node, "linux,ima-kexec-buffer", value,
-			  entry_size);
-	if (ret < 0)
-		return -EINVAL;
-
-	ret = fdt_add_mem_rsv(fdt, image->ima_buffer_addr,
-			      image->ima_buffer_size);
-	if (ret)
-		return -EINVAL;
-
-	pr_debug("IMA buffer at 0x%llx, size = 0x%zx\n",
-		 image->ima_buffer_addr, image->ima_buffer_size);
-
-	return 0;
-}
-#endif /* CONFIG_IMA_KEXEC */
diff --git a/drivers/of/kexec.c b/drivers/of/kexec.c
index 8fa8946cda42..6512e25671df 100644
--- a/drivers/of/kexec.c
+++ b/drivers/of/kexec.c
@@ -11,6 +11,7 @@
 
 #include <linux/kernel.h>
 #include <linux/kexec.h>
+#include <linux/memblock.h>
 #include <linux/libfdt.h>
 #include <linux/of.h>
 #include <linux/of_fdt.h>
@@ -69,6 +70,240 @@ static int fdt_find_and_del_mem_rsv(void *fdt, unsigned long start, unsigned lon
 	return -ENOENT;
 }
 
+/**
+ * get_addr_size_cells - Get address and size of root node
+ *
+ * @addr_cells: Return address of the root node
+ * @size_cells: Return size of the root node
+ *
+ * Return: 0 on success, or negative errno on error.
+ */
+static int get_addr_size_cells(int *addr_cells, int *size_cells)
+{
+	struct device_node *root;
+
+	root = of_find_node_by_path("/");
+	if (!root)
+		return -EINVAL;
+
+	*addr_cells = of_n_addr_cells(root);
+	*size_cells = of_n_size_cells(root);
+
+	of_node_put(root);
+
+	return 0;
+}
+
+/**
+ * do_get_kexec_buffer - Get address and size of device tree property
+ *
+ * @prop: Device tree property
+ * @len: Size of @prop
+ * @addr: Return address of the node
+ * @size: Return size of the node
+ *
+ * Return: 0 on success, or negative errno on error.
+ */
+static int do_get_kexec_buffer(const void *prop, int len, unsigned long *addr,
+			       size_t *size)
+{
+	int ret, addr_cells, size_cells;
+
+	ret = get_addr_size_cells(&addr_cells, &size_cells);
+	if (ret)
+		return ret;
+
+	if (len < 4 * (addr_cells + size_cells))
+		return -ENOENT;
+
+	*addr = of_read_number(prop, addr_cells);
+	*size = of_read_number(prop + 4 * addr_cells, size_cells);
+
+	return 0;
+}
+
+/**
+ * ima_get_kexec_buffer - get IMA buffer from the previous kernel
+ * @addr:	On successful return, set to point to the buffer contents.
+ * @size:	On successful return, set to the buffer size.
+ *
+ * Return: 0 on success, negative errno on error.
+ */
+int ima_get_kexec_buffer(void **addr, size_t *size)
+{
+	int ret, len;
+	unsigned long tmp_addr;
+	size_t tmp_size;
+	const void *prop;
+
+	if (!IS_ENABLED(CONFIG_HAVE_IMA_KEXEC))
+		return -ENOTSUPP;
+
+	prop = of_get_property(of_chosen, "linux,ima-kexec-buffer", &len);
+	if (!prop)
+		return -ENOENT;
+
+	ret = do_get_kexec_buffer(prop, len, &tmp_addr, &tmp_size);
+	if (ret)
+		return ret;
+
+	*addr = __va(tmp_addr);
+	*size = tmp_size;
+
+	return 0;
+}
+
+/**
+ * ima_free_kexec_buffer - free memory used by the IMA buffer
+ */
+int ima_free_kexec_buffer(void)
+{
+	int ret;
+	unsigned long addr;
+	size_t size;
+	struct property *prop;
+
+	if (!IS_ENABLED(CONFIG_HAVE_IMA_KEXEC))
+		return -ENOTSUPP;
+
+	prop = of_find_property(of_chosen, "linux,ima-kexec-buffer", NULL);
+	if (!prop)
+		return -ENOENT;
+
+	ret = do_get_kexec_buffer(prop->value, prop->length, &addr, &size);
+	if (ret)
+		return ret;
+
+	ret = of_remove_property(of_chosen, prop);
+	if (ret)
+		return ret;
+
+	return memblock_free(addr, size);
+
+}
+
+/**
+ * remove_ima_buffer - remove the IMA buffer property and reservation from @fdt
+ *
+ * @fdt: Flattened Device Tree to update
+ * @chosen_node: Offset to the chosen node in the device tree
+ *
+ * The IMA measurement buffer is of no use to a subsequent kernel, so we always
+ * remove it from the device tree.
+ */
+static void remove_ima_buffer(void *fdt, int chosen_node)
+{
+	int ret, len;
+	unsigned long addr;
+	size_t size;
+	const void *prop;
+
+	if (!IS_ENABLED(CONFIG_HAVE_IMA_KEXEC))
+		return;
+
+	prop = fdt_getprop(fdt, chosen_node, "linux,ima-kexec-buffer", &len);
+	if (!prop)
+		return;
+
+	ret = do_get_kexec_buffer(prop, len, &addr, &size);
+	fdt_delprop(fdt, chosen_node, "linux,ima-kexec-buffer");
+	if (ret)
+		return;
+
+	ret = fdt_find_and_del_mem_rsv(fdt, addr, size);
+	if (!ret)
+		pr_debug("Removed old IMA buffer reservation.\n");
+}
+
+#ifdef CONFIG_IMA_KEXEC
+/**
+ * write_number - Convert number to big-endian format
+ *
+ * @p:		Buffer to write the number to
+ * @value:	Number to convert
+ * @cells:	Number of cells
+ *
+ * Return: 0 on success, or negative errno on error.
+ */
+static int write_number(void *p, u64 value, int cells)
+{
+	if (cells == 1) {
+		u32 tmp;
+
+		if (value > U32_MAX)
+			return -EINVAL;
+
+		tmp = cpu_to_be32(value);
+		memcpy(p, &tmp, sizeof(tmp));
+	} else if (cells == 2) {
+		u64 tmp;
+
+		tmp = cpu_to_be64(value);
+		memcpy(p, &tmp, sizeof(tmp));
+	} else
+		return -EINVAL;
+
+	return 0;
+}
+
+/**
+ * setup_ima_buffer - add IMA buffer information to the fdt
+ * @image:		kexec image being loaded.
+ * @fdt:		Flattened device tree for the next kernel.
+ * @chosen_node:	Offset to the chosen node.
+ *
+ * Return: 0 on success, or negative errno on error.
+ */
+static int setup_ima_buffer(const struct kimage *image, void *fdt,
+			    int chosen_node)
+{
+	int ret, addr_cells, size_cells, entry_size;
+	u8 value[16];
+
+	if (!image->ima_buffer_size)
+		return 0;
+
+	ret = get_addr_size_cells(&addr_cells, &size_cells);
+	if (ret)
+		return ret;
+
+	entry_size = 4 * (addr_cells + size_cells);
+
+	if (entry_size > sizeof(value))
+		return -EINVAL;
+
+	ret = write_number(value, image->ima_buffer_addr, addr_cells);
+	if (ret)
+		return ret;
+
+	ret = write_number(value + 4 * addr_cells, image->ima_buffer_size,
+			   size_cells);
+	if (ret)
+		return ret;
+
+	ret = fdt_setprop(fdt, chosen_node, "linux,ima-kexec-buffer", value,
+			  entry_size);
+	if (ret < 0)
+		return -EINVAL;
+
+	ret = fdt_add_mem_rsv(fdt, image->ima_buffer_addr,
+			      image->ima_buffer_size);
+	if (ret)
+		return -EINVAL;
+
+	pr_debug("IMA buffer at 0x%llx, size = 0x%zx\n",
+		 image->ima_buffer_addr, image->ima_buffer_size);
+
+	return 0;
+}
+#else /* CONFIG_IMA_KEXEC */
+static inline int setup_ima_buffer(const struct kimage *image, void *fdt,
+				   int chosen_node)
+{
+	return 0;
+}
+#endif /* CONFIG_IMA_KEXEC */
+
 /*
  * of_kexec_alloc_and_setup_fdt - Alloc and setup a new Flattened Device Tree
  *
@@ -254,6 +489,11 @@ void *of_kexec_alloc_and_setup_fdt(const struct kimage *image,
 	}
 
 	ret = fdt_setprop(fdt, chosen_node, "linux,booted-from-kexec", NULL, 0);
+	if (ret)
+		goto out;
+
+	remove_ima_buffer(fdt, chosen_node);
+	ret = setup_ima_buffer(image, fdt, fdt_path_offset(fdt, "/chosen"));
 
 out:
 	if (ret) {
diff --git a/include/linux/of.h b/include/linux/of.h
index d66c915df910..e9209ef44cc0 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -565,6 +565,8 @@ void *of_kexec_alloc_and_setup_fdt(const struct kimage *image,
 				   unsigned long initrd_load_addr,
 				   unsigned long initrd_len,
 				   const char *cmdline, size_t extra_fdt_size);
+int ima_get_kexec_buffer(void **addr, size_t *size);
+int ima_free_kexec_buffer(void);
 #else /* CONFIG_OF */
 
 static inline void of_core_init(void)
diff --git a/security/integrity/ima/ima.h b/security/integrity/ima/ima.h
index 8e8b1e3cb847..cc0906cd3cd6 100644
--- a/security/integrity/ima/ima.h
+++ b/security/integrity/ima/ima.h
@@ -24,10 +24,6 @@
 
 #include "../integrity.h"
 
-#ifdef CONFIG_HAVE_IMA_KEXEC
-#include <asm/ima.h>
-#endif
-
 enum ima_show_type { IMA_SHOW_BINARY, IMA_SHOW_BINARY_NO_FIELD_LEN,
 		     IMA_SHOW_BINARY_OLD_STRING_FMT, IMA_SHOW_ASCII };
 enum tpm_pcrs { TPM_PCR0 = 0, TPM_PCR8 = 8, TPM_PCR10 = 10 };
diff --git a/security/integrity/ima/ima_kexec.c b/security/integrity/ima/ima_kexec.c
index 8b1a3d50c49c..667887665823 100644
--- a/security/integrity/ima/ima_kexec.c
+++ b/security/integrity/ima/ima_kexec.c
@@ -10,6 +10,7 @@
 #include <linux/seq_file.h>
 #include <linux/vmalloc.h>
 #include <linux/kexec.h>
+#include <linux/of.h>
 #include "ima.h"
 
 #ifdef CONFIG_IMA_KEXEC
-- 
2.30.0





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux