From: Rafał Miłecki <rafal@xxxxxxxxxx>
BCM4908 uses slightly modified STB family USB PHY. It handles OHCI/EHCI
and XHCI. It requires powering up using the PMB.
Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx>
---
.../bcm4908/bcm4906-netgear-r8000p.dts | 17 +++++++++++++
.../bcm4908/bcm4908-asus-gt-ac5300.dts | 17 +++++++++++++
.../boot/dts/broadcom/bcm4908/bcm4908.dtsi | 25 ++++++++++++++++---
3 files changed, 55 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
index ee3ed612274c..bf0d534ace2e 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
@@ -26,6 +26,23 @@ wps {
};
};
+&usb_phy {
+ brcm,ioc = <1>;
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&xhci {
+ status = "okay";
+};
+
&nandcs {
nand-ecc-strength = <4>;
nand-ecc-step-size = <512>;
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
index 6e4ad66ff536..bb06683d6acf 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
@@ -44,6 +44,23 @@ brightness {
};
};
+&usb_phy {
+ brcm,ioc = <1>;
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&xhci {
+ status = "okay";
+};
+
&ports {
port@0 {
label = "lan2";
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
index 9354077f74cd..358958105337 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
@@ -2,6 +2,8 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/soc/bcm-pmb.h>
/dts-v1/;
@@ -110,24 +112,39 @@ soc {
#size-cells = <1>;
ranges = <0x00 0x00 0x80000000 0x281000>;
- usb@c300 {
+ usb_phy: usb-phy@c200 {
+ compatible = "brcm,bcm4908-usb-phy";
+ reg = <0xc200 0x100>;
+ reg-names = "crtl";
+ power-domains = <&pmb BCM_PMB_HOST_USB>;
+ dr_mode = "host";
+ brcm,has-xhci;
+ brcm,has-eohci;
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+
+ ehci: usb@c300 {
compatible = "generic-ehci";
reg = <0xc300 0x100>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb_phy PHY_TYPE_USB2>;
status = "disabled";
};
- usb@c400 {
+ ohci: usb@c400 {
compatible = "generic-ohci";
reg = <0xc400 0x100>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb_phy PHY_TYPE_USB2>;
status = "disabled";
};
- usb@d000 {
+ xhci: usb@d000 {
compatible = "generic-xhci";
reg = <0xd000 0x8c8>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb_phy PHY_TYPE_USB3>;
status = "disabled";
};
@@ -222,7 +239,7 @@ procmon: syscon@280000 {
#address-cells = <1>;
#size-cells = <1>;
- power-controller@2800c0 {
+ pmb: power-controller@2800c0 {
compatible = "brcm,bcm4908-pmb";
reg = <0x2800c0 0x40>;
#power-domain-cells = <1>;
--
2.26.2
