On 2021-02-18 12:29, Vinod Koul wrote:
On 17-02-21, 12:18, Souradeep Chowdhury wrote:The DCC is a DMA Engine designed to capture and store data during system crash or software triggers.The DCC operates^^^ Space after . (quite a few here, pls fix them)
Ack
based on link list entries which provides it with data and addresses and the function it needs to perform.These functions are read,write and loop.Added the basic driver in this patch which contains a probe method which instantiates all the link list data specific to a SoC.Methods have also been added to handle all the functionalities specific to a linked list.Each DCC has it's own SRAM which needs to be instantiated at probe time as well.So help me understand, in case of system crash how will this be used..?
In case of system crashes like secure WDog bite, the DCC hardware captures and stores the values at the configured register addresses in it's dedicated SRAM. The driver only enables the DCC hardware during probe time and configures
register addresses via user space.
Signed-off-by: Souradeep Chowdhury <schowdhu@xxxxxxxxxxxxxx> --- drivers/soc/qcom/Kconfig | 8 + drivers/soc/qcom/Makefile | 1 +drivers/soc/qcom/dcc.c | 1055 +++++++++++++++++++++++++++++++++++++++++++++3 files changed, 1064 insertions(+) create mode 100644 drivers/soc/qcom/dcc.c diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig index 79b568f..8819e0b 100644 --- a/drivers/soc/qcom/Kconfig +++ b/drivers/soc/qcom/Kconfig @@ -69,6 +69,14 @@ config QCOM_LLCC SDM845. This provides interfaces to clients that use the LLCC. Say yes here to enable LLCC slice driver. +config QCOM_DCC+ tristate "Qualcomm Technologies, Inc. Data Capture and Compare engine driver"+ depends on ARCH_QCOM || COMPILE_TEST + help+ This option enables driver for Data Capture and Compare engine. DCC+ driver provides interface to configure DCC block and read back + captured data from DCC's internal SRAM. + config QCOM_KRYO_L2_ACCESSORS bool depends on ARCH_QCOM && ARM64 || COMPILE_TEST diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile index ad675a6..1b00870 100644 --- a/drivers/soc/qcom/Makefile +++ b/drivers/soc/qcom/Makefile @@ -26,3 +26,4 @@ obj-$(CONFIG_QCOM_LLCC) += llcc-qcom.o obj-$(CONFIG_QCOM_RPMHPD) += rpmhpd.o obj-$(CONFIG_QCOM_RPMPD) += rpmpd.o obj-$(CONFIG_QCOM_KRYO_L2_ACCESSORS) += kryo-l2-accessors.o +obj-$(CONFIG_QCOM_DCC) += dcc.o diff --git a/drivers/soc/qcom/dcc.c b/drivers/soc/qcom/dcc.c new file mode 100644 index 0000000..d67452b --- /dev/null +++ b/drivers/soc/qcom/dcc.c @@ -0,0 +1,1055 @@ +// SPDX-License-Identifier: GPL-2.0-only +/*+ * Copyright (c) 2015-2021, The Linux Foundation. All rights reserved.+ */ + +#include <linux/bitops.h> +#include <linux/cdev.h> +#include <linux/delay.h> +#include <linux/fs.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/uaccess.h> + +#define TIMEOUT_US 100 + +#define BM(lsb, msb) ((BIT(msb) - BIT(lsb)) + BIT(msb)) +#define BMVAL(val, lsb, msb) ((val & BM(lsb, msb)) >> lsb) +#define BVAL(val, n) ((val & BIT(n)) >> n)Pls use macros available in bitfield.h rather than inventing your own..
Ack
+ +#define dcc_writel(drvdata, val, off) \ + writel((val), drvdata->base + dcc_offset_conv(drvdata, off)) +#define dcc_readl(drvdata, off) \ + readl(drvdata->base + dcc_offset_conv(drvdata, off)) + +#define dcc_sram_readl(drvdata, off) \ + readl(drvdata->ram_base + off) + +/* DCC registers */ +#define DCC_HW_INFO 0x04 +#define DCC_LL_NUM_INFO 0x10 +#define DCC_STATUS 0x1C +#define DCC_LL_LOCK(m) (0x34 + 0x80 * m) +#define DCC_LL_CFG(m) (0x38 + 0x80 * m) +#define DCC_LL_BASE(m) (0x3c + 0x80 * m) +#define DCC_FD_BASE(m) (0x40 + 0x80 * m) +#define DCC_LL_TIMEOUT(m) (0x44 + 0x80 * m) +#define DCC_LL_INT_ENABLE(m) (0x4C + 0x80 * m) +#define DCC_LL_INT_STATUS(m) (0x50 + 0x80 * m) +#define DCC_LL_SW_TRIGGER(m) (0x60 + 0x80 * m) +#define DCC_LL_BUS_ACCESS_STATUS(m) (0x64 + 0x80 * m) + +#define DCC_MAP_LEVEL1 0x18 +#define DCC_MAP_LEVEL2 0x34 +#define DCC_MAP_LEVEL3 0x4C + +#define DCC_MAP_OFFSET1 0x10 +#define DCC_MAP_OFFSET2 0x18 +#define DCC_MAP_OFFSET3 0x1C +#define DCC_MAP_OFFSET4 0x8 + +#define DCC_FIX_LOOP_OFFSET 16 +#define DCC_VER_INFO_BIT 9 + +#define DCC_READ 0 +#define DCC_WRITE 1 +#define DCC_LOOP 2 +#define DCC_READ_WRITE 3 + +#define MAX_DCC_OFFSET (0xFF * 4) +#define MAX_DCC_LEN 0x7F +#define MAX_LOOP_CNT 0xFF + +#define DCC_ADDR_DESCRIPTOR 0x00 +#define DCC_LOOP_DESCRIPTOR (BIT(30)) +#define DCC_RD_MOD_WR_DESCRIPTOR (BIT(31)) +#define DCC_LINK_DESCRIPTOR (BIT(31) | BIT(30))we have GENMASK() for this
Ack
+ +#define DCC_READ_IND 0x00 +#define DCC_WRITE_IND (BIT(28)) + +#define DCC_AHB_IND 0x00 +#define DCC_APB_IND BIT(29) + +#define DCC_MAX_LINK_LIST 8 +#define DCC_INVALID_LINK_LIST 0xFF + +#define DCC_VER_MASK1 0x7F +#define DCC_VER_MASK2 0x3FGenmask for these too...
Ack
+ +#define DCC_RD_MOD_WR_ADDR 0xC105E + +struct qcom_dcc_config { + const int dcc_ram_offset; +}; + +static const struct qcom_dcc_config sm8150_cfg = { + .dcc_ram_offset = 0x5000, +};maybe move it down near compatible table?
Ack
+ +enum dcc_descriptor_type { + DCC_ADDR_TYPE, + DCC_LOOP_TYPE, + DCC_READ_WRITE_TYPE, + DCC_WRITE_TYPE +}; + +enum dcc_mem_map_ver { + DCC_MEM_MAP_VER1, + DCC_MEM_MAP_VER2, + DCC_MEM_MAP_VER3 +}; + +struct dcc_config_entry { + u32 base; + u32 offset; + u32 len; + u32 index; + u32 loop_cnt; + u32 write_val; + u32 mask; + bool apb_bus; + enum dcc_descriptor_type desc_type; + struct list_head list; +}; + +struct dcc_drvdata { + void __iomem *base; + u32 reg_size; + struct device *dev; + struct mutex mutex; + void __iomem *ram_base; + u32 ram_size; + u32 ram_offset; + enum dcc_mem_map_ver mem_map_ver; + u32 ram_cfg; + u32 ram_start; + bool *enable; + bool *configured; + bool interrupt_disable; + char *sram_node; + struct cdev sram_dev; + struct class *sram_class; + struct list_head *cfg_head; + u32 *nr_config; + u32 nr_link_list; + u8 curr_list; + u8 loopoff; +}; + +struct dcc_cfg_attr { + u32 addr; + u32 prev_addr; + u32 prev_off; + u32 link; + u32 sram_offset; +}; + +struct dcc_cfg_loop_attr { + u32 loop; + bool loop_start; + u32 loop_cnt; + u32 loop_len; + u32 loop_off; +}; + +static u32 dcc_offset_conv(struct dcc_drvdata *drvdata, u32 off) +{ + if (drvdata->mem_map_ver == DCC_MEM_MAP_VER1) { + if ((off & DCC_VER_MASK1) >= DCC_MAP_LEVEL3) + return (off - DCC_MAP_OFFSET3); + if ((off & DCC_VER_MASK1) >= DCC_MAP_LEVEL2) + return (off - DCC_MAP_OFFSET2); + else if ((off & DCC_VER_MASK1) >= DCC_MAP_LEVEL1) + return (off - DCC_MAP_OFFSET1); + } else if (drvdata->mem_map_ver == DCC_MEM_MAP_VER2) { + if ((off & DCC_VER_MASK1) >= DCC_MAP_LEVEL2) + return (off - DCC_MAP_OFFSET4); + } + return off; +} + +static int dcc_sram_writel(struct dcc_drvdata *drvdata, + u32 val, u32 off) +{ + if (unlikely(off > (drvdata->ram_size - 4))) + return -EINVAL; + + writel((val), drvdata->ram_base + off); + + return 0; +} + +static int _dcc_ll_cfg_read_write(struct dcc_drvdata *drvdata, +struct dcc_config_entry *entry, struct dcc_cfg_attr *cfg)this looks a bit hard to read, can you make it better (also you can go upto 100 chars now), do you checkpatch with --strict option to get better alignment of code
Ack
+{ + int ret = 0;Superfluous init?
Ack
+ + if (cfg->link) { + /* write new offset = 1 to continue + * processing the listkernel uses: /* * this is a * multi line comment style */
Ack
+ */ + + ret = dcc_sram_writel(drvdata, cfg->link, cfg->sram_offset); + if (ret) + return ret; + cfg->sram_offset += 4; + /* Reset link and prev_off */ + cfg->addr = 0x00; + cfg->link = 0; + cfg->prev_off = 0;memset cfg first?
Ack
+ cfg->prev_addr = cfg->addr; + } + + cfg->addr = DCC_RD_MOD_WR_DESCRIPTOR; + + ret = dcc_sram_writel(drvdata, cfg->addr, cfg->sram_offset); +drop this empty line
Ack
+ if (ret) + return ret; + + cfg->sram_offset += 4; + + ret = dcc_sram_writel(drvdata, entry->mask, cfg->sram_offset); + + if (ret) + return ret; + + cfg->sram_offset += 4; + + ret = dcc_sram_writel(drvdata, entry->write_val, cfg->sram_offset); + + if (ret) + return ret; + + cfg->sram_offset += 4; + + cfg->addr = 0; + + return ret; +} ++static int _dcc_ll_cfg_loop(struct dcc_drvdata *drvdata, struct dcc_config_entry *entry, +struct dcc_cfg_attr *cfg, struct dcc_cfg_loop_attr *cfg_loop, u32 *total_len)here as well
Ack
+{ + + int ret = 0; + + /* Check if we need to write link of prev entry */ + if (cfg->link) { + ret = dcc_sram_writel(drvdata, cfg->link, cfg->sram_offset); + if (ret) + return ret; + cfg->sram_offset += 4; + } + + if (cfg_loop->loop_start) { + cfg_loop->loop = (cfg->sram_offset - cfg_loop->loop_off) / 4; + cfg_loop->loop |= (cfg_loop->loop_cnt << drvdata->loopoff) & + BM(drvdata->loopoff, 27); + cfg_loop->loop |= DCC_LOOP_DESCRIPTOR;+ *total_len += (*total_len - cfg_loop->loop_len) * cfg_loop->loop_cnt;+ + ret = dcc_sram_writel(drvdata, cfg_loop->loop, cfg->sram_offset); + + if (ret) + return ret; + cfg->sram_offset += 4; + + cfg_loop->loop_start = false; + cfg_loop->loop_len = 0; + cfg_loop->loop_off = 0;seems quite similar to last one..? Maybe a helper for common code
Ack
+ } else { + cfg_loop->loop_start = true; + cfg_loop->loop_cnt = entry->loop_cnt - 1; + cfg_loop->loop_len = *total_len; + cfg_loop->loop_off = cfg->sram_offset; + } + + /* Reset link and prev_off */ + + cfg->addr = 0x00; + cfg->link = 0; + cfg->prev_off = 0; + cfg->prev_addr = cfg->addr; + + return ret; +} + +static int _dcc_ll_cfg_write(struct dcc_drvdata *drvdata,+struct dcc_config_entry *entry, struct dcc_cfg_attr *cfg, u32 *total_len)+{ + u32 off; + int ret = 0; + + if (cfg->link) { + /* write new offset = 1 to continue + * processing the list + */ + ret = dcc_sram_writel(drvdata, cfg->link, cfg->sram_offset); + + if (ret) + return ret; + + cfg->sram_offset += 4; + /* Reset link and prev_off */ + cfg->addr = 0x00; + cfg->prev_off = 0; + cfg->prev_addr = cfg->addr; + } + + off = entry->offset/4; + /* write new offset-length pair to correct position */+ cfg->link |= ((off & BM(0, 7)) | BIT(15) | ((entry->len << 8) & BM(8, 14)));+ cfg->link |= DCC_LINK_DESCRIPTOR; + + /* Address type */ + cfg->addr = (entry->base >> 4) & BM(0, 27); + if (entry->apb_bus) + cfg->addr |= DCC_ADDR_DESCRIPTOR | DCC_WRITE_IND | DCC_APB_IND; + else + cfg->addr |= DCC_ADDR_DESCRIPTOR | DCC_WRITE_IND | DCC_AHB_IND; + ret = dcc_sram_writel(drvdata, cfg->addr, cfg->sram_offset); + + if (ret) + return ret; + cfg->sram_offset += 4; + + ret = dcc_sram_writel(drvdata, cfg->link, cfg->sram_offset); + if (ret) + return ret; + cfg->sram_offset += 4; + + ret = dcc_sram_writel(drvdata, entry->write_val, cfg->sram_offset); + + if (ret) + return ret; + + cfg->sram_offset += 4; + cfg->addr = 0x00; + cfg->link = 0; + return ret; +} + +static int _dcc_ll_cfg_default(struct dcc_drvdata *drvdata,+struct dcc_config_entry *entry, struct dcc_cfg_attr *cfg, u32 *pos, u32 *total_len)+{ + int ret = 0; + u32 off; + + cfg->addr = (entry->base >> 4) & BM(0, 27); + + if (entry->apb_bus) + cfg->addr |= DCC_ADDR_DESCRIPTOR | DCC_READ_IND | DCC_APB_IND; + else + cfg->addr |= DCC_ADDR_DESCRIPTOR | DCC_READ_IND | DCC_AHB_IND; + + off = entry->offset/4; + + *total_len += entry->len * 4; ++ if (!cfg->prev_addr || cfg->prev_addr != cfg->addr || cfg->prev_off > off) {+ /* Check if we need to write prev link entry */ + if (cfg->link) { + ret = dcc_sram_writel(drvdata, cfg->link, cfg->sram_offset); + if (ret) + return ret; + cfg->sram_offset += 4; + }+ dev_dbg(drvdata->dev, "DCC: sram address 0x%x\n", cfg->sram_offset);+ + /* Write address */ + ret = dcc_sram_writel(drvdata, cfg->addr, cfg->sram_offset); + + if (ret) + return ret; + + cfg->sram_offset += 4; + + /* Reset link and prev_off */ + cfg->link = 0; + cfg->prev_off = 0; + } + + if ((off - cfg->prev_off) > 0xFF || entry->len > MAX_DCC_LEN) {+ dev_err(drvdata->dev, "DCC: Programming error Base: 0x%x, offset 0x%x\n",+ entry->base, entry->offset); + ret = -EINVAL; + return ret; + } + + if (cfg->link) { + /* + * link already has one offset-length so new + * offset-length needs to be placed at + * bits [29:15] + */ + *pos = 15; + + /* Clear bits [31:16] */ + cfg->link &= BM(0, 14); + } else { + /* + * link is empty, so new offset-length needs + * to be placed at bits [15:0] + */ + *pos = 0; + cfg->link = 1 << 15; + } + + /* write new offset-length pair to correct position */+ cfg->link |= (((off-cfg->prev_off) & BM(0, 7)) | ((entry->len << 8) & BM(8, 14))) << *pos;+ + cfg->link |= DCC_LINK_DESCRIPTOR; + + if (*pos) { + ret = dcc_sram_writel(drvdata, cfg->link, cfg->sram_offset); + if (ret) + return ret; + cfg->sram_offset += 4; + cfg->link = 0; + } + + cfg->prev_off = off + entry->len - 1; + cfg->prev_addr = cfg->addr; + return ret; +} + +static int __dcc_ll_cfg(struct dcc_drvdata *drvdata, int curr_list) +{ + int ret = 0; + u32 total_len, pos; + struct dcc_config_entry *entry; + struct dcc_cfg_attr cfg; + struct dcc_cfg_loop_attr cfg_loop; + + cfg.sram_offset = drvdata->ram_cfg * 4; + cfg.prev_off = 0; + cfg_loop.loop_off = 0; + total_len = 0; + cfg_loop.loop_len = 0; + cfg_loop.loop_cnt = 0; + cfg_loop.loop_start = false; + cfg.prev_addr = 0; + cfg.addr = 0; + cfg.link = 0;again use memset for these
Ack
+ + list_for_each_entry(entry, &drvdata->cfg_head[curr_list], list) { + switch (entry->desc_type) { + case DCC_READ_WRITE_TYPE: + {checkpatch should have told you this is not typical kernel style, pls fix this and many other things before we process further
Checkpatch with --strict option has been run for these patches but it seems to
be not detecting these. They have been fixed now.
