Hi Shubhrajyoti, Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx> wrote on Thu, 18 Feb 2021 10:19:45 +0530: > Add the devicetree binding for the xilinx clocking wizard. > > Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx> > --- > v6: > Fix a yaml warning > v7: > Add vendor prefix speed-grade > v8: > Fix the warnings > v9: > Fix the warnings > > .../bindings/clock/xlnx,clocking-wizard.yaml | 65 ++++++++++++++++++++++ > 1 file changed, 65 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml > > diff --git a/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml b/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml > new file mode 100644 > index 0000000..d209140 > --- /dev/null > +++ b/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml > @@ -0,0 +1,65 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: "http://devicetree.org/schemas/clock/xlnx,clocking-wizard.yaml#"; > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"; > + > +title: Xilinx clocking wizard > + > +maintainers: > + - Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx> > + > +description: > + The clocking wizard is a soft ip clocking block of Xilinx versal. It > + reads required input clock frequencies from the devicetree and acts as clock > + clock output. > + > +properties: > + compatible: > + const: xlnx,clocking-wizard > + > + reg: > + maxItems: 1 > + > + "#clock-cells": > + const: 1 > + > + clocks: > + items: > + - description: clock input > + - description: axi clock > + > + clock-names: > + items: > + - const: clk_in1 > + - const: s_axi_aclk > + > + clock-output-names: true > + > + xlnx,speed-grade: > + $ref: /schemas/types.yaml#/definitions/uint32 > + enum: [1, 2, 3] > + description: > + Speed grade of the device. A bit of explanation of what this describes would be welcome. Don't forget that binding are not tied to any driver implementation, these are supposed to be hardware description properties. > + > +required: > + - compatible > + - reg > + - "#clock-cells" > + - clocks > + - clock-names > + - xlnx,speed-grade > + > +additionalProperties: false > + > +examples: > + - | > + clock-controller { > + compatible = "xlnx,clocking-wizard"; > + reg = <0xb0000000 0x10000>; > + #clock-cells = <1>; > + xlnx,speed-grade = <1>; > + clock-names = "clk_in1", "s_axi_aclk"; > + clocks = <&clkc 15>, <&clkc 15>; > + }; > +... Thanks, Miquèl
