On Sat, 13 Feb 2021 13:22:41 +0000, Joe Sandom wrote: > Driver implementation for AMS/TAOS tsl2591 ambient light sensor. > > This driver supports configuration via device tree and sysfs. > Supported channels for raw infrared light, raw visible light, > raw combined light and combined lux value. > The driver additionally supports iio events on lower and > upper thresholds. > > This is a very-high sensitivity light-to-digital converter that > transforms light intensity into a digital signal. > > Datasheet Available at: https://ams.com/tsl25911 > > Signed-off-by: Joe Sandom <joe.g.sandom@xxxxxxxxx> > --- > Changes in v3: > - Cleaned up descriptions in binding file and Kconfig > - Changed macros to be uppercase > - Cleaned up comment formatting for capitalisation and block comments > - Changed tsl2591_settings to tsl2591_als_settings as settings only > related to als > - Return -EINVAL directly in default case to save some lines > - Consistent use of const in "compatible" check functions > - Removed mutex use in _show functions as not necessary > - Removed print's which contribute little value/have little meaning > > NOTES; > - Where spaces are seen at the end of some lines, it looks like gmail > has mangled things slightly. > - checkpatch.pl --strict remarks that mutex definition should have a > comment above it. I agree it has little meaning, but just added it to > satisfy checkpatch.pl :) > - For sysfs functions e.g. "in_illuminance_*", they're not currently > prefixed with "tsl2591" because I wanted to keep things consistent > with the other light drivers. Is this something we're looking to > change with the other drivers too? > > REASON FOR RESEND; > - Mailing lists were rejecting my outlook email, so switched to gmail as > mailing lists seem to accept without issues. > > .../bindings/iio/light/amstaos,tsl2591.yaml | 50 + > drivers/iio/light/Kconfig | 11 + > drivers/iio/light/Makefile | 1 + > drivers/iio/light/tsl2591.c | 1220 +++++++++++++++++ > 4 files changed, 1282 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/light/amstaos,tsl2591.yaml > create mode 100644 drivers/iio/light/tsl2591.c > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: ./Documentation/devicetree/bindings/iio/light/amstaos,tsl2591.yaml: $id: relative path/filename doesn't match actual path or filename expected: http://devicetree.org/schemas/iio/light/amstaos,tsl2591.yaml# See https://patchwork.ozlabs.org/patch/1440199 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.