Re: [PATCH v3 1/2] dt-bindings: display: bridge: Add bindings for SN65DSI83/84/85

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 15/02/2021 12:25, Jagan Teki wrote:
> On Mon, Feb 15, 2021 at 2:32 PM Neil Armstrong <narmstrong@xxxxxxxxxxxx> wrote:
>>
>> Hi,
>>
>> On 14/02/2021 18:44, Jagan Teki wrote:
>>> SN65DSI83/84/85 devices are MIPI DSI to LVDS based bridge
>>> controller IC's from Texas Instruments.
>>>
>>> SN65DSI83 - Single Channel DSI to Single-link LVDS bridge
>>> SN65DSI84 - Single Channel DSI to Dual-link LVDS bridge
>>> SN65DSI85 - Dual Channel DSI to Dual-link LVDS bridge
>>>
>>> Right now the bridge driver is supporting Channel A with single
>>> link, so dt-bindings documented according to it.
>>
>> Shouldn't it describe Dual-link LVDS already for SN65DSI84/85 and Dual Channel DSI for SN65DSI85 even if not implemented in the driver ?
> 
> Patch documented only Single link LVDS as it only supported by driver.
> Single link LVDS with Channel A configuration is common across all 3
> variant chips. I have SN65DSI84 with Single link LVDS which is routed
> in Channel A. Idea is to go with Single link and add double link later
> and document the same.

DT Bindings is unrelated to the software support, simply add the second LVDS channel endpoint
for SN65DSI84/85 and the second dsi endpoint for SN65DSI85.

Neil

> 
> Jagan.
> 




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux