On Mon, Feb 15, 2021 at 02:06:53PM +0900, Nobuhiro Iwamatsu wrote: > Add dwmac-visconti to the stmmac driver in Toshiba Visconti ARM SoCs. > This patch contains only the basic function of the device. There is no > clock control, PM, etc. yet. These will be added in the future. > > Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@xxxxxxxxxxxxx> > --- > drivers/net/ethernet/stmicro/stmmac/Kconfig | 8 + > drivers/net/ethernet/stmicro/stmmac/Makefile | 1 + > .../ethernet/stmicro/stmmac/dwmac-visconti.c | 285 ++++++++++++++++++ > 3 files changed, 294 insertions(+) > create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-visconti.c > > diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig > index 53f14c5a9e02..55ba67a550b9 100644 > --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig > +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig > @@ -219,6 +219,14 @@ config DWMAC_INTEL_PLAT > This selects the Intel platform specific glue layer support for > the stmmac device driver. This driver is used for the Intel Keem Bay > SoC. > + > +config DWMAC_VISCONTI > + bool "Toshiba Visconti DWMAC support" > + def_bool y I asked it before, but never received an answer. Why did you use "def_bool y" and not "default y"? Isn't it supposed to be "depends on STMMAC_ETH"? And probably it shouldn't be set as a default as "y". Thanks
