On Fri, Feb 12, 2021 at 11:58:04AM +0900, Nobuhiro Iwamatsu wrote: > Add dwmac-visconti to the stmmac driver in Toshiba Visconti ARM SoCs. > This patch contains only the basic function of the device. There is no > clock control, PM, etc. yet. These will be added in the future. > > Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@xxxxxxxxxxxxx> > --- > drivers/net/ethernet/stmicro/stmmac/Kconfig | 8 + > drivers/net/ethernet/stmicro/stmmac/Makefile | 1 + > .../ethernet/stmicro/stmmac/dwmac-visconti.c | 288 ++++++++++++++++++ > 3 files changed, 297 insertions(+) > create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-visconti.c > > diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig > index 53f14c5a9e02..55ba67a550b9 100644 > --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig > +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig > @@ -219,6 +219,14 @@ config DWMAC_INTEL_PLAT > This selects the Intel platform specific glue layer support for > the stmmac device driver. This driver is used for the Intel Keem Bay > SoC. > + > +config DWMAC_VISCONTI > + bool "Toshiba Visconti DWMAC support" > + def_bool y Doesn't it need to be "default y"? Thanks > + depends on OF && COMMON_CLK && (ARCH_VISCONTI || COMPILE_TEST) > + help > + Support for ethernet controller on Visconti SoCs. > + > endif
