Changes in v2: - address board-specific issues found by kernel_verify_patch - remove dead l2-cache node from iot2050-basic DT - add binding for Siemens vendor prefix - factor out board bindings into separate patch - add missing device_type to common ti,am654-pcie-rc nodes Jan Jan Kiszka (4): dt-bindings: Add Siemens vendor prefix dt-bindings: arm: ti: Add bindings for Siemens IOT2050 boards arm64: dts: ti: Add support for Siemens IOT2050 boards arm64: dts: ti: k3-am65-main: Add device_type to pcie*_rc nodes .../devicetree/bindings/arm/ti/k3.yaml | 2 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + arch/arm64/boot/dts/ti/Makefile | 2 + .../boot/dts/ti/k3-am65-iot2050-common.dtsi | 679 ++++++++++++++++++ arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 2 + .../boot/dts/ti/k3-am6528-iot2050-basic.dts | 61 ++ .../dts/ti/k3-am6548-iot2050-advanced.dts | 60 ++ 7 files changed, 808 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts create mode 100644 arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts -- 2.26.2
