From: Stefan Chulski <stefanc@xxxxxxxxxxx> Patch adds CM3 address space and PPv2.3 description. Signed-off-by: Stefan Chulski <stefanc@xxxxxxxxxxx> Acked-by: Marcin Wojtas <mw@xxxxxxxxxxxx> --- Documentation/devicetree/bindings/net/marvell-pp2.txt | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/net/marvell-pp2.txt b/Documentation/devicetree/bindings/net/marvell-pp2.txt index b783976..ce15c17 100644 --- a/Documentation/devicetree/bindings/net/marvell-pp2.txt +++ b/Documentation/devicetree/bindings/net/marvell-pp2.txt @@ -1,5 +1,6 @@ * Marvell Armada 375 Ethernet Controller (PPv2.1) Marvell Armada 7K/8K Ethernet Controller (PPv2.2) + Marvell CN913X Ethernet Controller (PPv2.3) Required properties: @@ -12,10 +13,11 @@ Required properties: - common controller registers - LMS registers - one register area per Ethernet port - For "marvell,armada-7k-pp2", must contain the following register + For "marvell,armada-7k-pp2" used by 7K/8K and CN913X, must contain the following register sets: - packet processor registers - networking interfaces registers + - CM3 address space used for TX Flow Control - clocks: pointers to the reference clocks for this device, consequently: - main controller clock (for both armada-375-pp2 and armada-7k-pp2) @@ -81,7 +83,7 @@ Example for marvell,armada-7k-pp2: cpm_ethernet: ethernet@0 { compatible = "marvell,armada-7k-pp22"; - reg = <0x0 0x100000>, <0x129000 0xb000>; + reg = <0x0 0x100000>, <0x129000 0xb000>, <0x220000 0x800>; clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>, <&cpm_syscon0 1 5>, <&cpm_syscon0 1 6>, <&cpm_syscon0 1 18>; clock-names = "pp_clk", "gop_clk", "mg_clk", "mg_core_clk", "axi_clk"; -- 1.9.1