On Wed, 10 Feb 2021 09:07:35 +0100, Neil Armstrong wrote: > The Amlogic G12A SoCs embeds an Analog MIPI D-PHY to communicate with DSI > panels, this adds the bindings. > > This Analog D-PHY works with a separate Digital MIPI D-PHY. > > Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx> > --- > .../phy/amlogic,g12a-mipi-dphy-analog.yaml | 35 +++++++++++++++++++ > 1 file changed, 35 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.example.dts:22.15-25: Warning (reg_format): /example-0/phy@0:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1) Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.example.dt.yaml: Warning (pci_device_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.example.dt.yaml: Warning (simple_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format' /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.example.dt.yaml: example-0: phy@0:reg:0: [0] is too short From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml See https://patchwork.ozlabs.org/patch/1438845 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
