From: Konstantin Porotchkin <kostap@xxxxxxxxxxx>
Select the AP SDHCI PHY slow mode for AP806 die only (move it
from armada-ap80x.dtsi to armada-ap806.dtsi). This will allow
running AP807 based devices at HS400 speed.
Remove Ap SDHCI slow mode property from MacchiatoBin board DTS
since it is already selected on the SoC level.
Signed-off-by: Konstantin Porotchkin <kostap@xxxxxxxxxxx>
---
arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi | 5 -----
arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 12 ++++++++++++
arch/arm64/boot/dts/marvell/armada-ap80x.dtsi | 1 -
3 files changed, 12 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
index 73733b4126e2..69653de998e2 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
@@ -109,11 +109,6 @@
&ap_sdhci0 {
bus-width = <8>;
- /*
- * Not stable in HS modes - phy needs "more calibration", so add
- * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes.
- */
- marvell,xenon-phy-slow-mode;
no-1-8-v;
no-sd;
no-sdio;
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
index 866628679ac7..828cd539173b 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -28,3 +28,15 @@
reg = <0x278 0xa30>;
};
};
+
+&ap_sdhci0 {
+ /*
+ * SoC based on AP806 revision A0, A1 and A2 should use slow mode
+ * settings for Ap SDHCI due to HW Erratum HWE-7296210
+ * AP806 revesion B0 and later has this erratum fixed and the slow
+ * mode could be removed in board DTS:
+ * /delete-property/marvell,xenon-phy-slow-mode;
+ * Starting from B0 revision, the AP SDHCI can run with HS400 timing.
+ */
+ marvell,xenon-phy-slow-mode;
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
index 12e477f1aeb9..edd6131a0587 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
@@ -257,7 +257,6 @@
clock-names = "core";
clocks = <&ap_clk 4>;
dma-coherent;
- marvell,xenon-phy-slow-mode;
status = "disabled";
};
--
2.17.1
