[PATCH v5 4/5] dts: marvell: Enable 10G interfaces on 9130-DB and 9131-DB boards

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Stefan Chulski <stefanc@xxxxxxxxxxx>

This patch enables eth0 10G interface on CN9130-DB paltforms and
eth0 10G and eth3 10G interfaces on CN9131-DB.

Signed-off-by: Stefan Chulski <stefanc@xxxxxxxxxxx>
Signed-off-by: Konstantin Porotchkin <kostap@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/marvell/cn9130-db.dtsi | 2 +-
 arch/arm64/boot/dts/marvell/cn9131-db.dtsi | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
index 8de3a552b806..97c74b81fd78 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
@@ -125,7 +125,7 @@
 
 /* SLM-1521-V2, CON9 */
 &cp0_eth0 {
-	status = "disabled";
+	status = "okay";
 	phy-mode = "10gbase-kr";
 	/* Generic PHY, providing serdes lanes */
 	phys = <&cp0_comphy4 0>;
diff --git a/arch/arm64/boot/dts/marvell/cn9131-db.dtsi b/arch/arm64/boot/dts/marvell/cn9131-db.dtsi
index 82471a83ad6d..f2e4d3a6a4f8 100644
--- a/arch/arm64/boot/dts/marvell/cn9131-db.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9131-db.dtsi
@@ -84,7 +84,7 @@
 
 /* CON50 */
 &cp1_eth0 {
-	status = "disabled";
+	status = "okay";
 	phy-mode = "10gbase-kr";
 	/* Generic PHY, providing serdes lanes */
 	phys = <&cp1_comphy4 0>;
-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux