This patch series adds support for Qualcomm QCA807x PHYs. These are really common companion PHYs on boards featuring Qualcomm IPQ40xx, IPQ60xx and IPQ807x SoCs. They are 2 or 5 port IEEE 802.3 clause 22 compliant 10BASE-Te, 100BASE-TX and 1000BASE-T PHY-s. They feature 2 SerDes, one for PSGMII or QSGMII connection with MAC, while second one is SGMII for connection to MAC or fiber. Both models have a combo port that supports 1000BASE-X and 100BASE-FX fiber. Each PHY inside of QCA807x series has 2 digitally controlled output only pins that natively drive LED-s. But some vendors used these to driver generic LED-s controlled by user space, so lets enable registering each PHY as GPIO controller and add driver for it. Robert Marko (4): dt-bindings: net: Add QCA807x PHY dt-bindings: net: Add bindings for Qualcomm QCA807x net: phy: Add Qualcomm QCA807x driver MAINTAINERS: Add entry for Qualcomm QCA807x PHY driver .../devicetree/bindings/net/qcom,qca807x.yaml | 70 ++ MAINTAINERS | 9 + drivers/net/phy/Kconfig | 10 + drivers/net/phy/Makefile | 1 + drivers/net/phy/qca807x.c | 855 ++++++++++++++++++ include/dt-bindings/net/qcom-qca807x.h | 30 + 6 files changed, 975 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/qcom,qca807x.yaml create mode 100644 drivers/net/phy/qca807x.c create mode 100644 include/dt-bindings/net/qcom-qca807x.h -- 2.29.2
