Re: [PATCH v3 1/3] drm/mediatek: mtk_dpi: Add check for max clock rate in mode_valid

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, Jitao:

Jitao Shi <jitao.shi@xxxxxxxxxxxx> 於 2021年2月8日 週一 上午9:42寫道:
>
> Add per-platform max clock rate check in mtk_dpi_bridge_mode_valid.

Reviewed-by: Chun-Kuang Hu <chunkuang.hu@xxxxxxxxxx>

>
> Signed-off-by: Jitao Shi <jitao.shi@xxxxxxxxxxxx>
> ---
>  drivers/gpu/drm/mediatek/mtk_dpi.c | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 52f11a63a330..ffa4a0f1989f 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -118,6 +118,7 @@ struct mtk_dpi_yc_limit {
>  struct mtk_dpi_conf {
>         unsigned int (*cal_factor)(int clock);
>         u32 reg_h_fre_con;
> +       u32 max_clock_khz;
>         bool edge_sel_en;
>  };
>
> @@ -555,9 +556,22 @@ static void mtk_dpi_bridge_enable(struct drm_bridge *bridge)
>         mtk_dpi_set_display_mode(dpi, &dpi->mode);
>  }
>
> +static enum drm_mode_status
> +mtk_dpi_bridge_mode_valid(struct drm_bridge *bridge,
> +                         const struct drm_display_mode *mode)
> +{
> +       struct mtk_dpi *dpi = bridge_to_dpi(bridge);
> +
> +       if (dpi->conf->max_clock_khz && mode->clock > dpi->conf->max_clock_khz)
> +               return MODE_CLOCK_HIGH;
> +
> +       return MODE_OK;
> +}
> +
>  static const struct drm_bridge_funcs mtk_dpi_bridge_funcs = {
>         .attach = mtk_dpi_bridge_attach,
>         .mode_set = mtk_dpi_bridge_mode_set,
> +       .mode_valid = mtk_dpi_bridge_mode_valid,
>         .disable = mtk_dpi_bridge_disable,
>         .enable = mtk_dpi_bridge_enable,
>  };
> @@ -673,17 +687,20 @@ static unsigned int mt8183_calculate_factor(int clock)
>  static const struct mtk_dpi_conf mt8173_conf = {
>         .cal_factor = mt8173_calculate_factor,
>         .reg_h_fre_con = 0xe0,
> +       .max_clock_khz = 300000,
>  };
>
>  static const struct mtk_dpi_conf mt2701_conf = {
>         .cal_factor = mt2701_calculate_factor,
>         .reg_h_fre_con = 0xb0,
>         .edge_sel_en = true,
> +       .max_clock_khz = 150000,
>  };
>
>  static const struct mtk_dpi_conf mt8183_conf = {
>         .cal_factor = mt8183_calculate_factor,
>         .reg_h_fre_con = 0xe0,
> +       .max_clock_khz = 100000,
>  };
>
>  static int mtk_dpi_probe(struct platform_device *pdev)
> --
> 2.25.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux