Re: [PATCH 18/18] arm64: apple: Add initial Mac Mini 2020 (M1) devicetree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 08/02/2021 21.27, Marc Zyngier wrote:
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_FIQ 0 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_FIQ 0 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_FIQ 1 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_FIQ 0 IRQ_TYPE_LEVEL_HIGH>;

This unfortunately doesn't match the binding, which doesn't cater
for systems without a secure physical timer, nor allows the description
of the EL2 virtual timer.

You should also have *different* interrupts for EL1 and EL2 timers,
although this is all a lie...

Well, we do - now that I confirmed all 4 timers work properly, the AIC driver should provide all 4. And ideally I find those EL1 timer mask bits and implement them in the aic driver too (for only the virt timers that have them and of course need them).

I just found the code in arm_arch_timer that forwards all this stuff to the kvm code, so it all makes sense now; if I can wire that up properly, heck, KVM might even just work here.


Looking at the only similar case, XGene lies about the secure timer
(it doesn't have any), and of course doesn't have an EL2 virtual
timer (ARMv8.0 only).

A sensible course of action could be to update the binding to at least:

- tell the kernel that there is no secure physical timer (and that
    the interrupt should be ignored)
- introduce a 5th possible interrupt for the EL2 virtual timer.

Sounds like I should be introducing interrupt-names support into this driver and using that, so we can just not specify IRQs that don't exist, instead of the hack with dummies. Falling back to indexes of course, to keep DT compat. i.e.

const char *names = {"phys-secure", "phys", "virt", "hyp-phys", "hyp-virt"};

bool has_names = of_property_read_bool(..., "interrupt-names");

for (each irq)
	if (has_names) foo = of_irq_get_byname(..., names[i])
	else foo = of_irq_get(..., i)

That said, is there a use case for the EL2 virtual timer? The driver always uses the EL2 physical timer with VHE right now. I guess it's worth describing it in the binding and dts, even if the driver never selects it...?

--
Hector Martin (marcan@xxxxxxxxx)
Public Key: https://mrcn.st/pub



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux