In order to use a multicolor-led together with a trigger
the led needs to have an intensity set to see something.
The trigger changes the brightness of the led but if there
is no intensity we actually see nothing.
This patch adds the ability to set the default intensity
of each multi-led node so that it is turned on from DT.
If no intensity is given the led will be initialized
with full intensity.
Part 1 updates the documentation.
Part 2 removes an unused variable.
Part 3 sets the initial intensity to full.
Part 4 reads the default intensity from DT
changes in v1
- fix dt_binding_check errors
changes in v2
- sets default intensity to full
- adds the property to the multi-led node
Signed-off-by: Sven Schuchmann <schuchmann@xxxxxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/leds/leds-lp50xx.yaml | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
index c192b5feadc7..2bc25b2fc94d 100644
--- a/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
@@ -65,6 +65,11 @@ patternProperties:
This property denotes the LED module number(s) that is used on the
for the child node. The LED modules can either be used stand alone
or grouped into a module bank.
+ default-intensity:
+ minItems: 1
+ maxItems: 3
+ description:
+ The default intensity the multi-led gets initialised with.
patternProperties:
"(^led-[0-9a-f]$|led)":
@@ -99,6 +104,7 @@ examples:
reg = <0x1>;
color = <LED_COLOR_ID_RGB>;
function = LED_FUNCTION_CHARGING;
+ default-intensity = <100 0 0>;
led-0 {
color = <LED_COLOR_ID_RED>;
--
2.17.1
