From: Konstantin Porotchkin <kostap@xxxxxxxxxxx>
All A7K/A8K boards are using NAND chip that supports
8 bit ECC strength. Using lower ECC strength is not recommended
by the flash manufacturer and may cause data corruption.
This patch changes the nand-ecc-strength value from 4 to 8.
Signed-off-by: Konstantin Porotchkin <kostap@xxxxxxxxxxx>
---
arch/arm64/boot/dts/marvell/armada-7040-db.dts | 2 +-
arch/arm64/boot/dts/marvell/armada-8040-db.dts | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
index f8179cadc610..39f1d393664f 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
@@ -169,7 +169,7 @@
label = "pxa3xx_nand-0";
nand-rb = <0>;
nand-on-flash-bbt;
- nand-ecc-strength = <4>;
+ nand-ecc-strength = <8>;
nand-ecc-step-size = <512>;
partitions {
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
index d96aa9e9e61c..04241dba189e 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
@@ -281,7 +281,7 @@
reg = <0>;
nand-rb = <0>;
nand-on-flash-bbt;
- nand-ecc-strength = <4>;
+ nand-ecc-strength = <8>;
nand-ecc-step-size = <512>;
partitions {
--
2.17.1
