[RFC PATCH 3/3] arm64: dts: mt8195: add USB related nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add USB nodes, PHY nodes and some fixed regulator nodes.
We prefer to use mt8192's compatible for the first USB controller
(port0), there is no wrong with the SOF/ITP interval; but for other
controllers (port1~port3) should use mt8195's one due to the wrong
default setting of SOF/ITP interval which should be calculated from
48M, but not 24M by default.

Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
---
 arch/arm64/boot/dts/mediatek/mt8195-evb.dts |  70 +++++++++
 arch/arm64/boot/dts/mediatek/mt8195.dtsi    | 163 ++++++++++++++++++++
 2 files changed, 233 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8195-evb.dts b/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
index 7264232bb7e9..a60682752e19 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 #include "mt8195.dtsi"
 #include "mt6359.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "MediaTek MT8195 evaluation board";
@@ -49,6 +50,36 @@
 	        enable-active-high;
 	        regulator-always-on;
 	};
+
+	usb_p0_vbus: regulator@2 {
+		compatible = "regulator-fixed";
+		gpio = <&pio 129 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vbus0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	usb_p2_vbus: regulator@3 {
+		compatible = "regulator-fixed";
+		gpio = <&pio 131 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vbus2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	usb_p3_vbus: regulator@4 {
+		compatible = "regulator-fixed";
+		gpio = <&pio 5 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vbus3";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+	};
 };
 
 &pmic {
@@ -156,6 +187,22 @@
 	status = "okay";
 };
 
+&u3phy0 {
+	status="okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
+
+&u3phy2 {
+	status="okay";
+};
+
+&u3phy3 {
+	status="okay";
+};
+
 &pio {
 	nor_pins_default: nordefault {
 		pins0 {
@@ -311,3 +358,26 @@
 	};
 };
 
+
+&xhci0 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	vbus-supply = <&usb_p0_vbus>;
+	status = "okay";
+};
+
+&xhci1 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&xhci2 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	vbus-supply = <&usb_p2_vbus>;
+	status = "okay";
+};
+
+&xhci3 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	vbus-supply = <&usb_p3_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index ccb9d24b1c1e..60c75b23cf03 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/memory/mt8195-memory-port.h>
+#include <dt-bindings/phy/phy.h>
 #include <dt-bindings/pinctrl/mt8195-pinfunc.h>
 #include <dt-bindings/power/mt8195-power.h>
 #include <dt-bindings/reset/ti-syscon.h>
@@ -914,6 +915,83 @@
 			status = "disabled";
 		};
 
+		xhci0: usb@11200000 {
+			compatible = "mediatek,mt8192-xhci",
+				     "mediatek,mtk-xhci";
+			reg = <0 0x11200000 0 0x1000>,
+			      <0 0x11203e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port0 PHY_TYPE_USB2>,
+			       <&u3port0 PHY_TYPE_USB3>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_SEL>,
+					  <&topckgen CLK_TOP_SSUSB_XHCI_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB>,
+				 <&infracfg_ao CLK_INFRA_AO_SSUSB_XHCI>,
+				 <&topckgen CLK_TOP_SSUSB_REF>;
+			clock-names = "sys_ck", "xhci_ck", "ref_ck";
+			status = "disabled";
+		};
+
+		xhci1: usb@11290000 {
+			compatible = "mediatek,mt8195-xhci",
+				     "mediatek,mtk-xhci";
+			reg = <0 0x11290000 0 0x1000>,
+			      <0 0x11293e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port1 PHY_TYPE_USB2>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_1P_SEL>,
+					  <&topckgen CLK_TOP_SSUSB_XHCI_1P_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_1P_BUS>,
+				 <&pericfg_ao CLK_PERI_AO_SSUSB_1P_XHCI>,
+				 <&topckgen CLK_TOP_SSUSB_P1_REF>;
+			clock-names = "sys_ck", "xhci_ck", "ref_ck";
+			status = "disabled";
+		};
+
+		xhci2: usb@112a0000 {
+			compatible = "mediatek,mt8195-xhci",
+				     "mediatek,mtk-xhci";
+			reg = <0 0x112a0000 0 0x1000>,
+			      <0 0x112a3e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port2 PHY_TYPE_USB2>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_2P_SEL>,
+					  <&topckgen CLK_TOP_SSUSB_XHCI_2P_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_2P_BUS>,
+				 <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>,
+				 <&topckgen CLK_TOP_SSUSB_P2_REF>;
+			clock-names = "sys_ck", "xhci_ck", "ref_ck";
+			status = "disabled";
+		};
+
+		xhci3: usb@112b0000 {
+			compatible = "mediatek,mt8195-xhci",
+				     "mediatek,mtk-xhci";
+			reg = <0 0x112b0000 0 0x1000>,
+			      <0 0x112b3e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port3 PHY_TYPE_USB2>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_3P_SEL>,
+					  <&topckgen CLK_TOP_SSUSB_XHCI_3P_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_3P_BUS>,
+				 <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>,
+				 <&topckgen CLK_TOP_SSUSB_P3_REF>;
+			clock-names = "sys_ck", "xhci_ck", "ref_ck";
+			status = "disabled";
+		};
+
 		pcie0: pcie@112f0000 {
 			device_type = "pci";
 			compatible = "mediatek,mt8195-pcie";
@@ -998,6 +1076,40 @@
 			status = "disabled";
 		};
 
+		u3phy2: usb-phy2@11c40000 {
+			compatible = "mediatek,mt8195-tphy",
+				     "mediatek,generic-tphy-v2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x11c40000 0x700>;
+			status = "disabled";
+
+			u2port2: usb2-phy2@0 {
+				reg = <0 0x700>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_P2_REF>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				status = "disabled";
+			};
+		};
+
+		u3phy3: usb-phy3@11c50000 {
+			compatible = "mediatek,mt8195-tphy",
+				     "mediatek,generic-tphy-v2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x11c50000 0x700>;
+			status = "disabled";
+
+			u2port3: usb2-phy3@0 {
+				reg = <0 0x700>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_P3_REF>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				status = "okay";
+			};
+		};
+
 		i2c5: i2c5@11d00000 {
 			compatible = "mediatek,mt8195-i2c",
 				"mediatek,mt8192-i2c";
@@ -1138,6 +1250,57 @@
 			#clock-cells = <1>;
 		};
 
+		u3phy1: usb-phy1@11e30000 {
+			compatible = "mediatek,mt8195-tphy",
+				     "mediatek,generic-tphy-v2";
+			power-domains = <&spm MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x11e30000 0x1000>;
+			status = "disabled";
+
+			u2port1: usb2-phy1@0 {
+				reg = <0 0x700>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_P1_REF>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				status = "okay";
+			};
+
+			u3port1: usb3-phy1@700 {
+				reg = <0x700 0x900>;
+				clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				status = "okay";
+			};
+		};
+
+		u3phy0: usb-phy0@11e40000 {
+			compatible = "mediatek,mt8195-tphy",
+				     "mediatek,generic-tphy-v2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x11e40000 0x1000>;
+			status = "disabled";
+
+			u2port0: usb2-phy0@0 {
+				reg = <0x0 0x700>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_REF>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				status = "okay";
+			};
+
+			u3port0: usb3-phy0@700 {
+				reg = <0x700 0 0x900>;
+				clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				status = "okay";
+			};
+		};
+
 		pciephy: phy@11e80000 {
 			compatible = "mediatek,mt8195-pcie-phy";
 			#address-cells = <2>;
-- 
2.18.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux