The Samsung Galaxy S5 uses the samsung s6e3fa2 AMOLED cmd LCD panel. This driver was generated with [1], with the addition of mipi_dsi_dcs_set_display_on at the end of the on method. [1] https://github.com/msm8916-mainline/linux-mdss-dsi-panel-driver-generator Signed-off-by: Iskren Chernev <iskren.chernev@xxxxxxxxx> --- drivers/gpu/drm/panel/Kconfig | 6 + drivers/gpu/drm/panel/Makefile | 1 + drivers/gpu/drm/panel/panel-samsung-s6e3fa2.c | 299 ++++++++++++++++++ 3 files changed, 306 insertions(+) create mode 100644 drivers/gpu/drm/panel/panel-samsung-s6e3fa2.c diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index 4894913936e9..82dff2afd5f1 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -348,6 +348,12 @@ config DRM_PANEL_SAMSUNG_S6D16D0 depends on DRM_MIPI_DSI select VIDEOMODE_HELPERS +config DRM_PANEL_SAMSUNG_S6E3FA2 + tristate "Samsung S6E3FA2 DSI video mode panel" + depends on OF + depends on DRM_MIPI_DSI + select VIDEOMODE_HELPERS + config DRM_PANEL_SAMSUNG_S6E3HA2 tristate "Samsung S6E3HA2 DSI video mode panel" depends on OF diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile index cae4d976c069..87d3f76f050e 100644 --- a/drivers/gpu/drm/panel/Makefile +++ b/drivers/gpu/drm/panel/Makefile @@ -35,6 +35,7 @@ obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM68200) += panel-raydium-rm68200.o obj-$(CONFIG_DRM_PANEL_RONBO_RB070D30) += panel-ronbo-rb070d30.o obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6D16D0) += panel-samsung-s6d16d0.o +obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E3FA2) += panel-samsung-s6e3fa2.o obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2) += panel-samsung-s6e3ha2.o obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03) += panel-samsung-s6e63j0x03.o obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E63M0) += panel-samsung-s6e63m0.o diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e3fa2.c b/drivers/gpu/drm/panel/panel-samsung-s6e3fa2.c new file mode 100644 index 000000000000..8985fccf9792 --- /dev/null +++ b/drivers/gpu/drm/panel/panel-samsung-s6e3fa2.c @@ -0,0 +1,299 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright (c) 2021 Iskren Chernev <iskren.chernev@xxxxxxxxx> +// Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree: +// Copyright (c) 2021, The Linux Foundation. All rights reserved. + +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regulator/consumer.h> + +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_modes.h> +#include <drm/drm_panel.h> + +struct samsung_s6e3fa2 { + struct drm_panel panel; + struct mipi_dsi_device *dsi; + struct regulator_bulk_data supplies[2]; + struct gpio_desc *reset_gpio; + bool prepared; +}; + +static inline +struct samsung_s6e3fa2 *to_samsung_s6e3fa2(struct drm_panel *panel) +{ + return container_of(panel, struct samsung_s6e3fa2, panel); +} + +#define dsi_generic_write_seq(dsi, seq...) do { \ + static const u8 d[] = { seq }; \ + int ret; \ + ret = mipi_dsi_generic_write(dsi, d, ARRAY_SIZE(d)); \ + if (ret < 0) \ + return ret; \ + } while (0) + +#define dsi_dcs_write_seq(dsi, seq...) do { \ + static const u8 d[] = { seq }; \ + int ret; \ + ret = mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d)); \ + if (ret < 0) \ + return ret; \ + } while (0) + +static void samsung_s6e3fa2_reset(struct samsung_s6e3fa2 *ctx) +{ + gpiod_set_value_cansleep(ctx->reset_gpio, 0); + usleep_range(5000, 6000); + gpiod_set_value_cansleep(ctx->reset_gpio, 1); + usleep_range(5000, 6000); + gpiod_set_value_cansleep(ctx->reset_gpio, 0); + usleep_range(7000, 8000); +} + +static int samsung_s6e3fa2_on(struct samsung_s6e3fa2 *ctx) +{ + struct mipi_dsi_device *dsi = ctx->dsi; + struct device *dev = &dsi->dev; + int ret; + + dsi->mode_flags |= MIPI_DSI_MODE_LPM; + + dsi_generic_write_seq(dsi, 0xf0, 0x5a, 0x5a); + dsi_generic_write_seq(dsi, 0xfc, 0x5a, 0x5a); + dsi_dcs_write_seq(dsi, 0xf2); + dsi_dcs_write_seq(dsi, 0xf9); + usleep_range(5000, 6000); + + ret = mipi_dsi_dcs_exit_sleep_mode(dsi); + if (ret < 0) { + dev_err(dev, "Failed to exit sleep mode: %d\n", ret); + return ret; + } + msleep(20); + + dsi_generic_write_seq(dsi, 0xca, + 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x80, 0x80, + 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, + 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, + 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x00, 0x00, + 0x00); + dsi_generic_write_seq(dsi, 0xb2, 0x00, 0x0e, 0x00, 0x0e); + dsi_generic_write_seq(dsi, 0xb6, + 0x98, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, + 0x55, 0x54, 0x20, 0x00, 0x0a, 0xaa, 0xaf, 0x0f, + 0x02, 0x22, 0x22, 0x10); + dsi_generic_write_seq(dsi, 0xb5, 0x41); + dsi_generic_write_seq(dsi, 0xf7, 0x03); + dsi_generic_write_seq(dsi, 0xf7, 0x00); + dsi_generic_write_seq(dsi, 0xb0, 0x02); + dsi_generic_write_seq(dsi, 0xfd, 0x0a); + dsi_generic_write_seq(dsi, 0xfe, 0x80); + dsi_generic_write_seq(dsi, 0xfe, 0x00); + dsi_generic_write_seq(dsi, 0x35, 0x00); + dsi_generic_write_seq(dsi, 0xbd, 0x05, 0x02, 0x02); + dsi_generic_write_seq(dsi, 0xf0, 0xa5, 0xa5); + dsi_generic_write_seq(dsi, 0xfc, 0xa5, 0xa5); + + ret = mipi_dsi_dcs_set_display_on(dsi); + if (ret < 0) { + dev_err(dev, "Failed to set display on: %d\n", ret); + return ret; + } + + return 0; +} + +static int samsung_s6e3fa2_off(struct samsung_s6e3fa2 *ctx) +{ + struct mipi_dsi_device *dsi = ctx->dsi; + struct device *dev = &dsi->dev; + int ret; + + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; + + ret = mipi_dsi_dcs_set_display_off(dsi); + if (ret < 0) { + dev_err(dev, "Failed to set display off: %d\n", ret); + return ret; + } + usleep_range(10000, 11000); + + ret = mipi_dsi_dcs_enter_sleep_mode(dsi); + if (ret < 0) { + dev_err(dev, "Failed to enter sleep mode: %d\n", ret); + return ret; + } + msleep(120); + + return 0; +} + +static int samsung_s6e3fa2_prepare(struct drm_panel *panel) +{ + struct samsung_s6e3fa2 *ctx = to_samsung_s6e3fa2(panel); + struct device *dev = &ctx->dsi->dev; + int ret; + + if (ctx->prepared) + return 0; + + ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies); + if (ret < 0) { + dev_err(dev, "Failed to enable regulators: %d\n", ret); + return ret; + } + + samsung_s6e3fa2_reset(ctx); + + ret = samsung_s6e3fa2_on(ctx); + if (ret < 0) { + dev_err(dev, "Failed to initialize panel: %d\n", ret); + gpiod_set_value_cansleep(ctx->reset_gpio, 1); + regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies); + return ret; + } + + ctx->prepared = true; + return 0; +} + +static int samsung_s6e3fa2_unprepare(struct drm_panel *panel) +{ + struct samsung_s6e3fa2 *ctx = to_samsung_s6e3fa2(panel); + struct device *dev = &ctx->dsi->dev; + int ret; + + if (!ctx->prepared) + return 0; + + ret = samsung_s6e3fa2_off(ctx); + if (ret < 0) + dev_err(dev, "Failed to un-initialize panel: %d\n", ret); + + gpiod_set_value_cansleep(ctx->reset_gpio, 1); + regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies); + + ctx->prepared = false; + return 0; +} + +static const struct drm_display_mode samsung_s6e3fa2_mode = { + .clock = (1080 + 162 + 10 + 36) * (1920 + 13 + 2 + 3) * 60 / 1000, + .hdisplay = 1080, + .hsync_start = 1080 + 162, + .hsync_end = 1080 + 162 + 10, + .htotal = 1080 + 162 + 10 + 36, + .vdisplay = 1920, + .vsync_start = 1920 + 13, + .vsync_end = 1920 + 13 + 2, + .vtotal = 1920 + 13 + 2 + 3, + .width_mm = 65, + .height_mm = 115, +}; + +static int samsung_s6e3fa2_get_modes(struct drm_panel *panel, + struct drm_connector *connector) +{ + struct drm_display_mode *mode; + + mode = drm_mode_duplicate(connector->dev, &samsung_s6e3fa2_mode); + if (!mode) + return -ENOMEM; + + drm_mode_set_name(mode); + + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + connector->display_info.width_mm = mode->width_mm; + connector->display_info.height_mm = mode->height_mm; + drm_mode_probed_add(connector, mode); + + return 1; +} + +static const struct drm_panel_funcs samsung_s6e3fa2_panel_funcs = { + .prepare = samsung_s6e3fa2_prepare, + .unprepare = samsung_s6e3fa2_unprepare, + .get_modes = samsung_s6e3fa2_get_modes, +}; + +static int samsung_s6e3fa2_probe(struct mipi_dsi_device *dsi) +{ + struct device *dev = &dsi->dev; + struct samsung_s6e3fa2 *ctx; + int ret; + + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + ctx->supplies[0].supply = "iovdd"; + ctx->supplies[1].supply = "vddr"; + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies), + ctx->supplies); + if (ret < 0) + return dev_err_probe(dev, ret, "Failed to get regulators\n"); + + ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(ctx->reset_gpio)) + return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio), + "Failed to get reset-gpios\n"); + + ctx->dsi = dsi; + mipi_dsi_set_drvdata(dsi, ctx); + + dsi->lanes = 4; + dsi->format = MIPI_DSI_FMT_RGB888; + dsi->mode_flags = MIPI_DSI_MODE_VIDEO_BURST | + MIPI_DSI_CLOCK_NON_CONTINUOUS; + + drm_panel_init(&ctx->panel, dev, &samsung_s6e3fa2_panel_funcs, + DRM_MODE_CONNECTOR_DSI); + + drm_panel_add(&ctx->panel); + + ret = mipi_dsi_attach(dsi); + if (ret < 0) { + dev_err(dev, "Failed to attach to DSI host: %d\n", ret); + drm_panel_remove(&ctx->panel); + return ret; + } + + return 0; +} + +static int samsung_s6e3fa2_remove(struct mipi_dsi_device *dsi) +{ + struct samsung_s6e3fa2 *ctx = mipi_dsi_get_drvdata(dsi); + int ret; + + ret = mipi_dsi_detach(dsi); + if (ret < 0) + dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret); + + drm_panel_remove(&ctx->panel); + + return 0; +} + +static const struct of_device_id samsung_s6e3fa2_of_match[] = { + { .compatible = "samsung,s6e3fa2" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, samsung_s6e3fa2_of_match); + +static struct mipi_dsi_driver samsung_s6e3fa2_driver = { + .probe = samsung_s6e3fa2_probe, + .remove = samsung_s6e3fa2_remove, + .driver = { + .name = "panel-samsung-s6e3fa2", + .of_match_table = samsung_s6e3fa2_of_match, + }, +}; +module_mipi_dsi_driver(samsung_s6e3fa2_driver); + +MODULE_AUTHOR("Iskren Chernev <iskren.chernev@xxxxxxxxx>"); +MODULE_DESCRIPTION("DRM driver for samsung,s6e3fa2 panel"); +MODULE_LICENSE("GPL v2"); -- 2.30.0
