Hi, On Sun, Jan 31, 2021 at 12:54 AM Corentin Labbe <clabbe.montjoie@xxxxxxxxx> wrote: > > Hello > > When booting next-20210128, I got the following warning on by bpim3 > 6.148421] ------------[ cut here ]------------ > [ 6.153145] WARNING: CPU: 2 PID: 57 at drivers/thermal/thermal_core.c:563 thermal_zone_device_update+0x134/0x154 > [ 6.163378] 'thermal_zone_device_update' must not be called without 'get_temp' ops set > [ 6.171300] Modules linked in: sha256_generic libsha256 > [ 6.176553] CPU: 2 PID: 57 Comm: kworker/2:1 Not tainted 5.11.0-rc1-00042-gf3788af62cfe #399 > [ 6.184984] Hardware name: Allwinner A83t board > [ 6.189517] Workqueue: events deferred_probe_work_func > [ 6.194686] [<c010d568>] (unwind_backtrace) from [<c010a060>] (show_stack+0x10/0x14) > [ 6.202438] [<c010a060>] (show_stack) from [<c07e156c>] (dump_stack+0x98/0xac) > [ 6.209666] [<c07e156c>] (dump_stack) from [<c07df02c>] (__warn+0xc0/0xd8) > [ 6.216545] [<c07df02c>] (__warn) from [<c07df0dc>] (warn_slowpath_fmt+0x98/0xc0) > [ 6.224030] [<c07df0dc>] (warn_slowpath_fmt) from [<c0630384>] (thermal_zone_device_update+0x134/0x154) > [ 6.233426] [<c0630384>] (thermal_zone_device_update) from [<c0630918>] (__thermal_cooling_device_register+0x334/0x35c) > [ 6.244204] [<c0630918>] (__thermal_cooling_device_register) from [<c0633ea0>] (__cpufreq_cooling_register.constprop.0+0x184/0x294) > [ 6.256026] [<c0633ea0>] (__cpufreq_cooling_register.constprop.0) from [<c0633ff0>] (of_cpufreq_cooling_register+0x40/0x7c) > [ 6.267153] [<c0633ff0>] (of_cpufreq_cooling_register) from [<c064cb44>] (cpufreq_online+0x2b4/0x8f4) > [ 6.276379] [<c064cb44>] (cpufreq_online) from [<c064d200>] (cpufreq_add_dev+0x6c/0x78) > [ 6.284383] [<c064d200>] (cpufreq_add_dev) from [<c04f7a98>] (subsys_interface_register+0xa4/0xf0) > [ 6.293344] [<c04f7a98>] (subsys_interface_register) from [<c064b664>] (cpufreq_register_driver+0x144/0x2dc) > [ 6.303169] [<c064b664>] (cpufreq_register_driver) from [<c064de34>] (dt_cpufreq_probe+0x298/0x3b8) > [ 6.312215] [<c064de34>] (dt_cpufreq_probe) from [<c04fb540>] (platform_probe+0x5c/0xb8) > [ 6.320313] [<c04fb540>] (platform_probe) from [<c04f9374>] (really_probe+0x1dc/0x3b8) > [ 6.328231] [<c04f9374>] (really_probe) from [<c04f95ac>] (driver_probe_device+0x5c/0xb4) > [ 6.336406] [<c04f95ac>] (driver_probe_device) from [<c04f778c>] (bus_for_each_drv+0x84/0xc8) > [ 6.344928] [<c04f778c>] (bus_for_each_drv) from [<c04f9124>] (__device_attach+0xe8/0x154) > [ 6.353189] [<c04f9124>] (__device_attach) from [<c04f8440>] (bus_probe_device+0x84/0x8c) > [ 6.361365] [<c04f8440>] (bus_probe_device) from [<c04f88d4>] (deferred_probe_work_func+0x64/0x90) > [ 6.370321] [<c04f88d4>] (deferred_probe_work_func) from [<c0134b98>] (process_one_work+0x1dc/0x438) > [ 6.379456] [<c0134b98>] (process_one_work) from [<c0135050>] (worker_thread+0x25c/0x55c) > [ 6.387632] [<c0135050>] (worker_thread) from [<c013b7b4>] (kthread+0x124/0x150) > [ 6.395032] [<c013b7b4>] (kthread) from [<c0100150>] (ret_from_fork+0x14/0x24) > [ 6.402256] Exception stack(0xc12d1fb0 to 0xc12d1ff8) > [ 6.407307] 1fa0: 00000000 00000000 00000000 00000000 > [ 6.415478] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 > [ 6.423648] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 > [ 6.430301] ---[ end trace bd63a5c976f3611c ]--- > > I bisected the problem to > ARM: dts: sunxi: Remove thermal zones without trip points > > Reverting this commit remove the warning. The thermal subsystem seems to require a thermal zone be present for each thermal sensor that is registered. So maybe a better solution is not to remove the thermal zones without trip points, but just add the standard passive and critical trip points based on the SoC's thermal limits. ChenYu
