Hi, Hsin-Yi:
Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx> 於 2021年1月29日 週五 下午5:23寫道：
>
> From: Yongqiang Niu <yongqiang.niu@xxxxxxxxxxxx>
>
> Enable dither function to improve the display quality for dither
> supported bpc 4, 6, 8. For not supported bpc, use relay mode.
>
> Signed-off-by: Yongqiang Niu <yongqiang.niu@xxxxxxxxxxxx>
> Signed-off-by: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx>
> ---
> drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 15 ++++++++++++---
> 1 file changed, 12 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> index ac2cb25620357..5761dd15eedf2 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> @@ -53,6 +53,7 @@
> #define DITHER_EN BIT(0)
> #define DISP_DITHER_CFG 0x0020
> #define DITHER_RELAY_MODE BIT(0)
> +#define DITHER_ENGINE_EN BIT(1)
> #define DISP_DITHER_SIZE 0x0030
>
> #define LUT_10BIT_MASK 0x03ff
> @@ -314,9 +315,17 @@ static void mtk_dither_config(struct device *dev, unsigned int w,
> unsigned int bpc, struct cmdq_pkt *cmdq_pkt)
> {
> struct mtk_ddp_comp_dev *priv = dev_get_drvdata(dev);
> -
> - mtk_ddp_write(cmdq_pkt, h << 16 | w, &priv->cmdq_reg, priv->regs, DISP_DITHER_SIZE);
> - mtk_ddp_write(cmdq_pkt, DITHER_RELAY_MODE, &priv->cmdq_reg, priv->regs, DISP_DITHER_CFG);
> + bool valid_bpc = (bpc == 4 || bpc == 6 || bpc == 8);
> +
> + mtk_ddp_write(cmdq_pkt, h << 16 | w, &priv->cmdq_reg, priv->regs,
> + DISP_DITHER_SIZE);
> + if (valid_bpc)
> + mtk_dither_set_common(priv->regs, &priv->cmdq_reg, bpc,
> + DISP_DITHER_CFG, DITHER_ENGINE_EN,
> + cmdq_pkt);
> + else
> + mtk_ddp_write(cmdq_pkt, DITHER_RELAY_MODE, &priv->cmdq_reg,
> + priv->regs, DISP_DITHER_CFG);
od has relay mode,
static void mtk_od_config(struct mtk_ddp_comp *comp, unsigned int w,
unsigned int h, unsigned int vrefresh,
unsigned int bpc, struct cmdq_pkt *cmdq_pkt)
{
mtk_ddp_write(cmdq_pkt, w << 16 | h, comp, DISP_OD_SIZE);
mtk_ddp_write(cmdq_pkt, OD_RELAYMODE, comp, DISP_OD_CFG);
mtk_dither_set(comp, bpc, DISP_OD_CFG, cmdq_pkt);
}
and it does not check valid bpc (I think drm core already set bpc to
4, 6, 8 or 0), so align implementation of mtk_dither_config() with
mtk_od_config().
gamma also has relay mode (refer to [1] page 689), but we need to
enable gamma's gamma function, so we do not set gamma to relay mode.
So I think maybe we could implement mtk_dither_config() as:
mtk_dither_config()
{
mtk_ddp_write(cmdq_pkt, h << 16 | w, &priv->cmdq_reg,
priv->regs, DISP_DITHER_SIZE);
mtk_ddp_write(cmdq_pkt, DITHER_RELAY_MODE, &priv->cmdq_reg,
priv->regs, DISP_DITHER_CFG);
mtk_dither_set_common(priv->regs, &priv->cmdq_reg, bpc,
DISP_DITHER_CFG, DITHER_ENGINE_EN, cmdq_pkt);
}
[1] https://www.96boards.org/documentation/consumer/mediatekx20/additional-docs/docs/MT6797_Register_Table_Part_2.pdf
Regards,
Chun-Kuang.
> }
>
> static void mtk_dither_start(struct device *dev)
> --
> 2.30.0.365.g02bc693789-goog
>
>
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
