Re: [PATCH v5 6/8] regulator: mt6359: Add support for MT6359 regulator

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jan 22, 2021 at 7:27 PM Hsin-Hsiung Wang
<hsin-hsiung.wang@xxxxxxxxxxxx> wrote:
>
> From: Wen Su <wen.su@xxxxxxxxxxxx>
>
> The MT6359 is a regulator found on boards based on MediaTek MT6779 and
> probably other SoCs. It is a so called pmic and connects as a slave to
> SoC using SPI, wrapped inside the pmic-wrapper.
>
> Signed-off-by: Wen Su <wen.su@xxxxxxxxxxxx>
> Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@xxxxxxxxxxxx>
> ---
> changes since v4:
> - add enable time of ldo.
> - use the device of mfd driver for the regulator_config.
> - add the regulators_node support.

This doesn't build at all, please at least compile test before sending
new revisions.

> ---
>  drivers/regulator/Kconfig                  |   9 +
>  drivers/regulator/Makefile                 |   1 +
>  drivers/regulator/mt6359-regulator.c       | 669 +++++++++++++++++++++
>  include/linux/regulator/mt6359-regulator.h |  58 ++
>  4 files changed, 737 insertions(+)
>  create mode 100644 drivers/regulator/mt6359-regulator.c
>  create mode 100644 include/linux/regulator/mt6359-regulator.h
>
> diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
> index 53fa84f4d1e1..3de7bb5be8ac 100644
> --- a/drivers/regulator/Kconfig
> +++ b/drivers/regulator/Kconfig
> @@ -750,6 +750,15 @@ config REGULATOR_MT6358
>           This driver supports the control of different power rails of device
>           through regulator interface.
>
> +config REGULATOR_MT6359
> +       tristate "MediaTek MT6359 PMIC"
> +       depends on MFD_MT6397
> +       help
> +         Say y here to select this option to enable the power regulator of
> +         MediaTek MT6359 PMIC.
> +         This driver supports the control of different power rails of device
> +         through regulator interface.
> +
>  config REGULATOR_MT6360
>         tristate "MT6360 SubPMIC Regulator"
>         depends on MFD_MT6360
> diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
> index 680e539f6579..4f65eaead82d 100644
> --- a/drivers/regulator/Makefile
> +++ b/drivers/regulator/Makefile
> @@ -91,6 +91,7 @@ obj-$(CONFIG_REGULATOR_MPQ7920) += mpq7920.o
>  obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
>  obj-$(CONFIG_REGULATOR_MT6323) += mt6323-regulator.o
>  obj-$(CONFIG_REGULATOR_MT6358) += mt6358-regulator.o
> +obj-$(CONFIG_REGULATOR_MT6359) += mt6359-regulator.o
>  obj-$(CONFIG_REGULATOR_MT6360) += mt6360-regulator.o
>  obj-$(CONFIG_REGULATOR_MT6380) += mt6380-regulator.o
>  obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o
> diff --git a/drivers/regulator/mt6359-regulator.c b/drivers/regulator/mt6359-regulator.c
> new file mode 100644
> index 000000000000..fabc3f57f334
> --- /dev/null
> +++ b/drivers/regulator/mt6359-regulator.c
> @@ -0,0 +1,669 @@
> +// SPDX-License-Identifier: GPL-2.0
> +//
> +// Copyright (c) 2020 MediaTek Inc.
> +
> +#include <linux/platform_device.h>
> +#include <linux/mfd/mt6359/registers.h>
> +#include <linux/mfd/mt6397/core.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/driver.h>
> +#include <linux/regulator/machine.h>
> +#include <linux/regulator/mt6359-regulator.h>
> +#include <linux/regulator/of_regulator.h>
> +
> +#define MT6359_BUCK_MODE_AUTO          0
> +#define MT6359_BUCK_MODE_FORCE_PWM     1
> +#define MT6359_BUCK_MODE_NORMAL                0
> +#define MT6359_BUCK_MODE_LP            2
> +
> +/*
> + * MT6359 regulators' information
> + *
> + * @desc: standard fields of regulator description.
> + * @status_reg: for query status of regulators.
> + * @qi: Mask for query enable signal status of regulators.
> + * @modeset_reg: for operating AUTO/PWM mode register.
> + * @modeset_mask: MASK for operating modeset register.
> + * @modeset_shift: SHIFT for operating modeset register.
> + */
> +struct mt6359_regulator_info {
> +       struct regulator_desc desc;
> +       u32 status_reg;
> +       u32 qi;
> +       u32 modeset_reg;
> +       u32 modeset_mask;
> +       u32 modeset_shift;
> +       u32 lp_mode_reg;
> +       u32 lp_mode_mask;
> +       u32 lp_mode_shift;
> +};
> +
> +#define MT6359_BUCK(match, _name, min, max, step, min_sel,     \
> +       volt_ranges, _enable_reg, _status_reg,                  \
> +       _vsel_reg, _vsel_mask,                                  \
> +       _lp_mode_reg, _lp_mode_shift,                           \
> +       _modeset_reg, _modeset_shift)                           \
> +[MT6359_ID_##_name] = {                                                \
> +       .desc = {                                               \
> +               .name = #_name,                                 \
> +               .of_match = of_match_ptr(match),                \
> +               .regulators_node = of_match_ptr("regulators"),  \
> +               .ops = &mt6359_volt_range_ops,                  \
> +               .type = REGULATOR_VOLTAGE,                      \
> +               .id = MT6359_ID_##_name,                        \
> +               .owner = THIS_MODULE,                           \
> +               .uV_step = (step),                              \
> +               .linear_min_sel = (min_sel),                    \
> +               .linear_min_sel = (min_sel),                    \
> +               .n_voltages = ((max) - (min)) / (step) + 1,     \
> +               .linear_min_sel = (min_sel),                    \
> +               .n_voltages = ((max) - (min)) / (step) + 1,     \
> +               .min_uV = (min),                                \
> +               .linear_ranges = volt_ranges,                   \
> +               .n_linear_ranges = ARRAY_SIZE(volt_ranges),     \
> +               .vsel_reg = _vsel_reg,                          \
> +               .vsel_mask = _vsel_mask,                        \
> +               .enable_reg = _enable_reg,                      \
> +               .enable_mask = BIT(0),                          \
> +               .of_map_mode = mt6359_map_mode,                 \
> +               .of_map_mode = mt6359_map_mode,                 \
> +       },                                                      \
> +       .status_reg = _status_reg,                              \
> +       .qi = BIT(0),                                           \
> +       .lp_mode_reg = _lp_mode_reg,                            \
> +       .lp_mode_reg = _lp_mode_reg,                            \
> +       .lp_mode_mask = BIT(_lp_mode_shift),                    \
> +       .lp_mode_reg = _lp_mode_reg,                            \

Repeated 3 times.

> +       .lp_mode_mask = BIT(_lp_mode_shift),                    \

Repeated twice.

> +       .lp_mode_shift = _lp_mode_shift,                        \
> +       .modeset_reg = _modeset_reg,                            \
> +       .modeset_mask = BIT(_modeset_shift),                    \
> +       .modeset_shift = _modeset_shift                         \
> +}
> +
> +#define MT6359_LDO_LINEAR(match, _name, min, max, step, min_sel,\
> +#define MT6359_LDO_LINEAR(match, _name, min, max, step, min_sel,\

Repeated twice

> +       volt_ranges, _enable_reg, _status_reg,                  \
> +       _vsel_reg, _vsel_mask)                                  \
> +       _vsel_reg, _vsel_mask)                                  \
> +[MT6359_ID_##_name] = {                                                \
> +       .desc = {                                               \
> +       .desc = {                                               \
> +               .name = #_name,                                 \
> +               .of_match = of_match_ptr(match),                \
> +               .of_match = of_match_ptr(match),                \
> +               .regulators_node = of_match_ptr("regulators"),  \
> +               .ops = &mt6359_volt_range_ops,                  \
> +               .type = REGULATOR_VOLTAGE,                      \
> +               .id = MT6359_ID_##_name,                        \
> +               .owner = THIS_MODULE,                           \
> +               .owner = THIS_MODULE,                           \
> +               .uV_step = (step),                              \
> +               .linear_min_sel = (min_sel),                    \
> +               .n_voltages = ((max) - (min)) / (step) + 1,     \
> +               .min_uV = (min),                                \
> +               .linear_ranges = volt_ranges,                   \
> +               .n_linear_ranges = ARRAY_SIZE(volt_ranges),     \
> +               .n_linear_ranges = ARRAY_SIZE(volt_ranges),     \
> +               .vsel_reg = _vsel_reg,                          \
> +               .n_linear_ranges = ARRAY_SIZE(volt_ranges),     \
> +               .vsel_reg = _vsel_reg,                          \
> +               .vsel_mask = _vsel_mask,                        \
> +               .enable_reg = _enable_reg,                      \
> +               .enable_mask = BIT(0),                          \
> +       },                                                      \
> +       .status_reg = _status_reg,                              \
> +       .status_reg = _status_reg,                              \
> +       .qi = BIT(0),                                           \
> +       .status_reg = _status_reg,                              \
> +       .qi = BIT(0),                                           \
> +}
> +
> +#define MT6359_LDO(match, _name, _volt_table,                  \
> +       _enable_reg, _enable_mask, _status_reg,                 \
> +       _vsel_reg, _vsel_mask, _en_delay)                       \
> +[MT6359_ID_##_name] = {                                                \
> +[MT6359_ID_##_name] = {                                                \

Repeated twice

> +       .desc = {                                               \
> +               .name = #_name,                                 \
> +               .of_match = of_match_ptr(match),                \
> +               .of_match = of_match_ptr(match),                \
> +               .regulators_node = of_match_ptr("regulators"),  \
> +               .ops = &mt6359_volt_table_ops,                  \
> +               .type = REGULATOR_VOLTAGE,                      \
> +               .id = MT6359_ID_##_name,                        \
> +               .owner = THIS_MODULE,                           \
> +               .n_voltages = ARRAY_SIZE(_volt_table),          \
> +               .n_voltages = ARRAY_SIZE(_volt_table),          \
> +               .volt_table = _volt_table,                      \
> +               .n_voltages = ARRAY_SIZE(_volt_table),          \
> +               .volt_table = _volt_table,                      \
> +               .vsel_reg = _vsel_reg,                          \
> +               .vsel_mask = _vsel_mask,                        \
> +               .enable_reg = _enable_reg,                      \
> +               .enable_mask = BIT(_enable_mask),               \
> +               .enable_time = _en_delay,                       \
> +       },                                                      \
> +       .status_reg = _status_reg,                              \
> +       .qi = BIT(0),                                           \
> +}
> +
> +#define MT6359_REG_FIXED(match, _name, _enable_reg,    \
> +       _status_reg, _fixed_volt)                       \
> +[MT6359_ID_##_name] = {                                        \
> +[MT6359_ID_##_name] = {                                        \
> +       .desc = {                                       \
> +               .name = #_name,                         \
> +               .name = #_name,                         \
> +               .of_match = of_match_ptr(match),        \
> +               .regulators_node = of_match_ptr("regulators"),  \
> +               .ops = &mt6359_volt_fixed_ops,          \
> +               .type = REGULATOR_VOLTAGE,              \
> +               .id = MT6359_ID_##_name,                \
> +               .id = MT6359_ID_##_name,                \
> +               .owner = THIS_MODULE,                   \
> +               .n_voltages = 1,                        \
> +               .enable_reg = _enable_reg,              \
> +               .enable_mask = BIT(0),                  \
> +               .fixed_uV = (_fixed_volt),              \
> +       },                                              \
> +       .status_reg = _status_reg,                      \
> +       .status_reg = _status_reg,                      \
> +       .qi = BIT(0),                                   \
> +}
> +
> +static const struct linear_range mt_volt_range1[] = {
> +       REGULATOR_LINEAR_RANGE(800000, 0, 0x70, 12500),
> +};
> +};
> +
> +static const struct linear_range mt_volt_range2[] = {
> +       REGULATOR_LINEAR_RANGE(400000, 0, 0x7f, 6250),
> +};
> +
> +static const struct linear_range mt_volt_range3[] = {
> +       REGULATOR_LINEAR_RANGE(400000, 0, 0x70, 6250),
> +};
> +
> +static const struct linear_range mt_volt_range4[] = {
> +       REGULATOR_LINEAR_RANGE(800000, 0, 0x40, 12500),
> +};
> +
> +static const struct linear_range mt_volt_range5[] = {
> +static const struct linear_range mt_volt_range5[] = {

This is repeated twice.

> +       REGULATOR_LINEAR_RANGE(500000, 0, 0x3F, 50000),
> +};
> +
> [snip]



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux